1.Working Voltage: DC12V-36V
2.Current:Standby less than 10mA,Working less than 128mA
3.Working Temperature: -10'C—+60'C
4.Receiver Frequency: 315MHz/433.92MHZ
5.Receiving Sensitivity: -105dB
6.Output State: Switching Value
7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A
8.Case Size:96* 80 * 29mm
Encoding Type: Learning Code
Add transmitter by the Learning Button on the receiver

About Working way:

 

Working way changed by Learning button

 

Momentary: Press the Learning Button 1 times.

Relay: Press and hold -> On; Release -> Off.

 

Toggle: Press the Learning Button 2times.

Relay: Press -> On; Press same button again -> Off·

 

Latched:Press the Learning Button 3 times.

Relay: Press -> On; Press other button -> Off.

 

2channel Momentary+2channel Latched: Press the Learning Button 4 times.

 

2channel Momentary+2channel Toggle: Press the Learning Button 5 times.

 

2channel Toggle+2channel Latched: Press the Learning Button 6 times.

 

About Learning and clearing Method:

 

Clearning: Hold press learning button about 8 seconds,indicator light flashes several times and off,then press remote ,Relay did not Respond ,it means clearning code successful.

Press transmitter button A,the receiver relay A is ON,the relay B/C/D is OFF
Press transmitter button B,the receiver relay B is ON,the relay A/C/D is OFF
Press transmitter button C,the receiver relay C is ON,the relay A/B/D is OFF
Press transmitter button D,the receiver relay D is ON,the relay A/B/C is OFF

It mean ,Latched only can keep 1CH ON,and it will ofen have 1CH is ON

About Transmitter:

 

1.Buttons: 4 Buttons

 

2.Working Voltage:27A 12V

3.Operating frequency :433MHz

 

4.Remote Distance: 20-100M

 

5.Operating Current: 13 mAh

 

6.Encode: EV1527 code

 

7.Size: 5.7 x 3.2 x 1.1cm