HOT SALES
T - with delayed shutdown function **
Adjustable delay time from approximately 0 minutes to approximately 30 minutes.
Turning the potentiometer counterclockwise sets the minimum delay value of 0 minutes.
To increase the duration, turn the potentiometer clockwise.
The maximum delay value is 30 minutes.
The shutdown delay can be continuously regulated.
The fan's shutdown delay duration is calculated from the moment the lighting/separate switch, to which the device is connected, is turned off.
TH - with humidity sensor and delayed shutdown function **
Adjustable activation humidity from approximately 60% to 90% relative humidity.
Adjustable delay time from approximately 0 minutes to approximately 30 minutes.
The humidity sensor detects humidity levels between 60% and 90%. The system is equipped with a timer as well.
The device's operation depends on the connection mode to the power supply.
In the first connection mode, the fan automatically starts when the humidity level exceeds the set value.
It shuts off when the humidity level falls below the set value and after a specific time determined by the potentiometer, calculated from the moment the humidity level decreases.
In the second connection mode, in addition to automatic activation, there is also the option of manually activating the fan using the light switch or a separate switch for the fan. After turning off the light or switch, the device shuts off after a predetermined time set by the potentiometer, similar to the first case.
Technical Parameters
Power: 12 W
Operating Voltage: 220V-240V/50Hz
Speed: 2400 RPM (rotations per minute)
Pipe Diameter: 105-110mm
Noise Level: 34 dB (at a distance of 3 meters)
Airflow: 95 cubic meters per hour
Protection Class: IPX4
Time Control: Approximately 1 minute to approximately 30 minutes
Activation Humidity: 60-90%
Speed levels: 1
Number of blades: 7
Ventilation system: Exhaust fan
Product type: Bathroom fan
Static pressure: 50 Pa
Weight: 0.5 - 1.5 kg
Material: Plastic
Depth: 90 mm
Our exhaust fan can be installed on the ceiling or on the wall. However,
please note that for vertical installation, the backflow flap must be
removed. (The current instruction manual is an older version and has not
yet been updated.)
