The Suzuki Swift Carbon Fibre Rear Brake Light Cover is a stylish and durable accessory designed specifically for models from 2015 to 2021. Made from high-quality vinyl with a carbon fibre finish, this adhesive attachment adds a sleek and modern touch to the rear light of your vehicle. Perfect for Suzuki Swift owners looking to enhance the exterior of their car with a touch of carbon fibre flair.

Installation:

For transportation reasons, you may find the vinyl Is rolled up and when unboxed there may be some creases due to this. Please do not worry, the material is very flexible and the creases can be removed easily once heat is applied via a heat gun/hair dryer. Upon unboxing, please un-roll the adhesive strip and use heat to pull out any creases. Please make sure you are gentle as too much pressure may rip the tape.

• Step 1: Please clean the area and eliminate any dirt or debris before installing.

• Step 2: Check the installation area according to the vehicle with this product first.

•Step 3: Once you have found the correct installation area, remove the backing of the adhesive tape and press down firmly to ensure all of the tape has made good connection with the surface area.

Installation Tips: In winter or cold area, the adhesive should be slightly heated before installation. After heating, the stability will be greatly improved.If the temperature is below 20 degrees Celsius, it is necessary to heat the adhesive.

Please do not wash the vehicle for at least 48 hours after installation to give the adhesive good time to set. When cleaning after this period, the strip can be cleaned as usual however please try to avoid using a jet wash on the strip overlay directly.

Sizes: 31.6cm x 3.1cm

Compatibility:

For Suzuki Swift vehicles 2013- 2016

Will fit other vehicles provided sizes are the same.

Please get in touch if you have any questions.