Product description:


This is intended for non destructive testing of the quality of concrete in finished structures. In testing, the rebound number is measured, which is dependent on the strength of the mortar (concrete with coarse particles) close to the surface. Since the strength of the mortar as a rule determines the strength of the concrete, the rebound number gives an indication for the strength of the concrete. The results obtained are ±15% of the actual compressive strength. As the test does not destroy the specimen, the curing process continuing after setting of concrete the be followed up accurately.


Product Specification

BrandAlldays
Weight2. 0 kg 
AccuracyBetter than + 2 Rebound Numbers when tested on Calibration Anvil
Range10 to 70 N/mm  
Resolution2 Rebound Number(s)
Carry case 1 Nos 
Product Description
Weight2.0 kg 
Conforms to
Range10 to 100 Rebound Number
Resolution2 Rebound Number(s)
Impact Energy2.207 Nm
AccuracyBetter than + 2 Rebound Numbers when tested on Calibration Anvil
Carry Case 1 nos 
Grindstone -   1 nos 
Spring - 1 Nos 
User manual 1 nos 
One - Product Certificate  
Screw driver - 2 nos 
Carry case WxHxD  325x165x165 mm 

Note - Please see this attached for User manual for Rebound hammer 

Special Discount - on Bulk Inquiry IND