Features Low power consumption One-click automatic channel search Can record anytime and anywhere Dual antenna reception can make the signal more stable 4.3 inch 800*480 high-definition bright screen Built-in super sensitive 5.8G 40 channel receiver Built-in 3.7V/1200mAh high-capacity polymer lithium battery Universal usb charging interface Real-time video, low latency Chinese and English bilingual menu Support audio and video input Expenditure audio output (headphones can be connected) Support 5-23V wide voltage charging
Specification LCD screen size: 4.3 inches Resolution: 800*480 Display ratio: 16:9 Viewing angle: full screen Brightness: 500cd/m2 Video delay: less than 20ms
Interface Antenna: 2*RP-SMA male hole USB: charging cable AV interface: external audio and video input or audio output Card slot: Support C10 high speed TF card
DVR recording size: VGA/D1/HD (three modes are optional) Video sound: on/off (optional) Recording time: off/3 minutes/5 minutes/10 minutes (optional) Frame rate: 30 frames Compression format: MJPEG Video file format: AVI
Languages: English and Chinese
Power supply Power adapter: DC5V/2A, support DV5-23V wide voltage Battery: 3.7V/1200mAh, After the DVR starts, it can be used for about 2.5 hours on full battery DVR is off, about 3.5 hours with full battery Power consumption: Normal mode: the device works at 3.7V and the current is 400mA Recording mode: The working current of the device is 620mA at 3.7V The maximum charging current of the built-in battery is 500mA
Wireless channel table
Body size: 146*80*13mm Weight: 159g (not including antenna)
Note: video input cannot be recorded from the AV port
Key Description 1. Power: Short press to enter the menu bar, long press for 2 seconds to turn on/off. 2. Search: Short press to enter automatic search, long press for 1.5 seconds to enter the AV interface. 3. Rec: Short press to start recording, then short press to close recording 4. Band+: Short press to enter the frequency point (A-B-E-F-R frequency point cyclically switch) 5. CH+: Short press to enter the frequency band (1-2-3-4-5-6-7-8 frequency band cyclically switch) 6. Antenna A port: inner needle 7. Antenna B port: inner needle 8. AV: Support video input and audio output. 9. DC/5-23V: Micro-USB charging, support DC5-23V wide voltage. 10. TF CARD: TF card slot 11. RESET: Reset button 12. Charging indicator: when charging, the red light is on, when the battery is full, the green light is on 13. Video indicator: display the different working status of the dvr module
Menu Command In the standby state, short press Power to enter the menu bar. In the menu bar mode: Button 1: Scrollable options. Button 2: Automatically search for channels Button 3: invalid Button 4: Turn up the sound Button 5: Turn down the sound
Playback instructions In the menu bar mode, select the DVR option bar to enter the DVR mode. In DVR mode Button 1: return/exit playback mode Button 2: Delete the current file Button 3: Play/Pause Button 4: Select video forward/Adjustable fast forward when playing video Button 5: Select video backward/Adjustable rewind when playing video