Items Description：
Item Type: Headlight
Condition: New
Warranty: 1 Year
To Fit: For Toyota Camry 2010-2011
OE Number：TO2503191,81110-06500
Quantity Sold: 1 pcs/set
Placement on Vehicle: Front, Right
Fitment：
Fit for Toyota Camry LE / XLE 2010-2011 Models
Passenger Right Side Only
Features：
Projector: The reflectors concentrate the hot spot directly underneath the step for distribution of light that is technically correct in giving a wider beam and aiding in distance vision
Lens: Our Injection-Molded Polycarbonate Lenses are derived from Aerospace technology, offering superior ultraviolet protection from lens yellowing and a high impact resistance
100% Legal Reflector: Highly Reflective Amber Reflectors provide a safety feature giving the vehicle a OE style presence and are compliant with DOT and SAE standards
Package Include:
1*Right Side Headlight
Note：
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1.Find the adjustment screws：Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlights individually：The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field：The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4. Adjust the horizontal field：The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5.Test your results：If there is a problem after installation, please check whether the connection is correct. If you have any other questions, please feel free to contact us!
