This black headless bridge is suitable for 4 - string headless electric basses.
With its beautiful electroplated appearance, it is an ideal upgrade and replacement part.
Single tubular bridge is approximately 105mm(4.13")×15mm(0.59"),
Baseplate is about 92mm(3.62")×59.6mm (2.34"),
String spacing is 19mm (0.75"), total string spacing is 57mm (2.24").
Material: Brass and Zinc Alloy.
Color:Black.
Packaging:
1 headless bass bridge,
2 hex wrench,
4 mounting screws.
The 4 - string headless bass bridge adopts advanced electroplating technology, and its surface exhibits excellent electrical conductivity.
The base plate is installed with a 6 - degree tilt relative to the tubular bridge. This setup increases the adjustment range of the effective string length, enabling more precise octave adjustment.
The saddle can be easily adjusted vertically and horizontally, allowing for precise adjustment of string spacing and octave.
The saddle fixing screws prevent the saddle from wobbling.
Inside the adjusting nut at the bottom of the headless bass guitar bridge, there are two flat bearings.
These bearings ensure that turning the nut for adjustment is easy and requires minimal effort.