Fitment:

• ​KIA Auto and Light Truck SORENTO 2003 3.5L
• KIA Auto and Light Truck SORENTO 2004 3.5L
• KIA Auto and Light Truck SORENTO 2005 3.5L
• KIA Auto and Light Truck SORENTO 2006 3.5L

Product Information:

• Unit Type: Alternator
• Voltage: 12V
• Rotation: CW(Clockwise)
• Amperage: 120 A
• Pulley Class: S5

• Regulator Design Type: Internal

• Mileage:More Than 100,000 miles
• ​Note: Brand New Manufactured With Best Quality Components​

What does an Alternator do?

    The Alternator is an integral part of every internal combustion engine vehicle, and its main duty is to convert chemical energy into electrical energy so that you can charge and replenish the battery in the engine and other electrical components in the car.

Installation Step:

• Step 1: Disconnect the Battery

  First and most importantly: disconnect the battery. There may be several wires or just one wire on your alternator, but rest assured that one of them is hot. If you don't disconnect the battery, you're very likely to end up grounding a live wire during the process. 

• Step 2: Disconnect the Wires

  Now that the battery is out of the way disconnect the wire or wires from the back of the alternator. This is usually a very simple process but if you're unsure as to where they go, label them as you take them loose.

• Step 3: Remove the Belt From the Pulley

  Every project has a tough spot, and this is the tough spot for alternator replacement: remove the belt from the pulley. Somewhere on your vehicle there is a tensioner pulley. You'll need to move it enough to slip the belt off the pulley. 

• Step 4: Remove Bolts

  Once the belt is off just remove whatever bolts connect the alternator to the bracket and you're good to go. Our model required the removal of three bolts: one at the front and two at the rear.

• Step 5: Halfway There

  With the old alternator in your hand you're half way home. You'll likely find getting the new one back in goes much faster since you already know what size the bolt heads are and where everything is.

• Step 6: Examine the Replacement

  Examine the replacement unit before reassembly and make sure it will work for your application.

• Step 7: Reverse the Removal Steps

  To complete the project just reverse the removal steps paying careful attention to belt routing and tensioning. 

• Attention：

  If you have any difficulty with installation, please contact an auto repair shop or a professional technician!

Package Included:

    1 x Alternator

Tips:

  - Clean the scale and dust on the surface of the generator frequently, keep it clean and well ventilated.

  - Check the fastening of various fasteners related to the generator frequently, and tighten all screws in time.

  - The tightness of the transmission belt should be appropriate. If it is too loose, it will slip easily, resulting in insufficient power generation; if it is too tight, it will easily damage the belt and generator bearing.

  - When installing the battery, be sure not to install it incorrectly. Generally, install the positive wire first, not the ground wire, otherwise the diode will easily burn out.

  - When the generator cannot generate electricity due to a fault, it must be eliminated in time, otherwise it will cause more serious faults.

Note:

    After receiving the payment, we will pack it well and ship it to you as soon as possible. If you have any Pre-sales and after-sales questions, please feel free to contact us！