This is the original 0.2mm fluid needle for the Gaahleri Premium Mobius (GHPM-Mobius series). It's the finest needle in the Mobius range — manufactured from polished stainless steel with multiple high-precision grinding passes for the highest level of concentricity with the matching 0.2mm nozzle.

At 0.2mm, this needle is purpose-built for fine detail work: micro-highlights, hairline freehand, tight preshading, and precision effects where a 0.3mm needle starts to feel too broad. The Mobius 0.2mm system is designed for low-pressure atomisation, giving you a tight, controlled spray pattern with minimal overspray — ideal for work on individual miniatures, small-scale panel lines, and delicate weathering effects.

If your original needle has been bent, nicked, or worn, this is a direct replacement that restores factory performance. At 0.2mm, even the slightest bend or imperfection at the tip will visibly affect your spray pattern — this is the needle size where "close enough" doesn't cut it.

Important: This needle is compatible with the Premium Series Mobius only. It will not fit the Mobius TG, Mobius SP, or any other Gaahleri airbrush.

1 × Gaahleri 0.2mm Fluid Needle for Premium Mobius in protective packaging.

✔ Fits: Gaahleri Premium Mobius (GHPM-Mobius) with 0.2mm head configuration

✘ Does NOT fit: Mobius TG, Mobius SP, GHAD-68, GHAD-39, GHAC-Swallowtail, GHAC-98D, Ace, or any other Gaahleri series

🔗 Pairs with: 0.2mm nozzle for Premium Mobius — at this needle diameter, nozzle condition is critical. If your old needle was bent, always check the nozzle too.

🔸 Insert the needle from the front. Gaahleri's own Mobius 0.2 manual recommends front insertion to avoid damaging the nozzle bore and the needle tip — the opposite of what you might do with larger needles.

🔸 Thin your paint properly. 0.2mm is far less forgiving than 0.3mm. Under-thinned paint will clog quickly and create tip-dry. Think milk consistency or thinner — and strain if needed.

🔸 Keep everything spotless. At this diameter, tiny dried paint particles that a 0.3mm needle would push through will block a 0.2mm bore. Regular flush cycles between colours are essential.

🔸 Don't touch the tip. At all. A 0.2mm tip is extremely delicate — fingerprints, contact with tools, or bumping against the model can cause micro-damage that's invisible to the eye but ruins your pattern.

🔸 Replace needle and nozzle together. At 0.2mm, the tolerances are tighter than at larger sizes. A bent needle deforms the nozzle faster, and a worn nozzle degrades a new needle faster. Always consider both when troubleshooting.

▸ This needle fits the Premium Mobius only. It does not fit the Mobius TG, Mobius SP, or any other Gaahleri model — this is clearly stated by the manufacturer.

▸ 0.2mm is a specialist diameter. It requires well-thinned paint, meticulous cleaning, and careful handling. If you're new to airbrushing, the 0.3mm needle is a more forgiving starting point.

▸ The tip is extremely delicate — more so than 0.3mm or 0.5mm needles. Expect to treat it with extra care during handling, cleaning, and storage.

▸ A new needle alone won't fix issues caused by a damaged nozzle, worn packing, or clogged paint channels. At 0.2mm, even minor problems elsewhere in the system show up in the spray pattern.

🔹 Micro-detail work — edge highlights, hairline freehand, tiny weathering effects

🔹 Miniature painters working at 28–54mm who need the tightest possible spray

🔹 Scale modellers — ultra-fine panel preshading, tight camo lines in 1/72–1/48

🔹 Experienced airbrush users who already have their thinning, cleaning, and technique dialled in

📬 Same-day dispatch on orders placed before 3 PM (Mon–Fri)

📦 Tracked shipping as standard

📍 Shipped from Derby, UK