About this item

• 👍👍 【2026 Newly Released Version 5.0 with More Advanced Functions】✔️LAUNCH X431 PRO3 V+ 5.0 features OEM topology mapping which systematically show the communication structure between the modules; ✔️2026 newly version adds CAN FD connector, which can diagnose more new vehicles from GM; ✔️ It supports module installation, which is compatible with Ford /Lincoln/ Mazda etc.; ✔️ 24V HD trucks can be diagnosed by it with X431 HD module. X431 V+ 5.0 outperforms most bidirectional scan tools.
• 👍👍 【ECU Coding】 LAUNCH X431 PRO3 (V+ 5.0) supports ECU online coding for BMW/VW/Audi/Skoda/Seat, and offline coding, Customization/Personalization. ECU coding means coding the retrofitted components after replacing new ECUs. This function can also change the settings of the car software,disable annoying settings like seat belt chime, and personalize car settings like folding rearview mirror. Guided function works for VW/Audi/Skoda/Seat, providing OE-level instructions for simplified diagnoses.
• 👍👍 【55+ Maintenance Services】LAUNCH X431 PRO3 (V+ 5.0) diagnostic scanner can perform: Oil/SAS/EPB/TPMS/BMS/ETS/Gear/Brake/AFS/Gearbox/Sunroof/SUS/AFS headlamp reset and more initialization/matching/calibration. With scheduled procedures and smooth logical workflow to make maintenance a breeze in the workshop. You can even get 100+ advanced maintenance functions under the "Diagnoses"-"Car Model"-"System"-"Special Functions".
• 👍👍 【Bidirectional Control (Active Test)】You can use the LAUNCH X431 PRO3 V+ 5.0 bidirectional scan tool to quickly troubleshoot the vehicles by sending commands to many systems/components to test their working status, without using the vehicle controls. It all set to top-notch standards for automotive experts, home mechanics and workshops.
• 👍👍 【Upgraded DBSCar VII Connector】 The new version 5.0 of the LAUNCH X431 PRO3 (V+ 5.0) has a fresh hardware upgrade, especially for the connector. The new DBSCar VII connector supports CAN FD protocol, which covers more vehicle models. This 10.1-inch advanced diagnostic tool based on Android 10.0 system, using a 2.0Ghz 4-core high-efficiency processor, 4GB RAM + 64GB ROM large storage, and is equipped with a high-endurance battery. It runs faster, more stably and lasts longer.
• 【FCA AutoAuth & 200000+ Cars Coverage】 This full system diagnostic scanner can perform OE-level diagnosis and analysis on all available systems for more than 200+ brands (200,000+ models in American, Asian, European, 1984-2026). No-IP limitation. Compatible with cars/trucks/buses/trailers/pick-up,etc. This scan tool supports AutoAuth for FCA SGW, working on 2017 and later Chrysler, Dodge, Jeep, Alfa Romeo, Fiat, etc.
• 【Supports Extension Modules】 LAUNCH X431 PRO3 V+ 5.0 automotive scanner supports extended modules (SOLD SEPARATELY): ➤ADAS device--ADAS PRO/MOBILE➤TPMS tool--X431 TSGUN; ➤Bluetooth battery tester--BST360; ➤Video Scope--VSP600; ➤X-431 WiFi Printer, making the diagnostic function more powerful. 🚩Other critical features: AutoVIN & AutoScan, diagnostic report, remote diagnoses, vehicle coverage search.
• 【Buy with Confidence: 100% Original】 This launch scanner X431 PRO3 V+ 5.0 comes with 🚩5 years warranty & 2 years free update WiFi upgrade; 🚩For any problems with booting, charging, APP registration, please feel free to contact us via 🚩Contact Us to send us your Diagnostic Report, we will help to analyze your cars' problems. 

Product description

2026 NEW X431 PRO3 V+ 5.0 NEW UPGRADE - THE FIRST CHOICE OF MOST MECHANICS & REPAIR SHOPS

LAUNCH X431 PRO3 V+ 5.0 Support Advanced ECU Coding Functions (Online Coding, Offline Coding, Customization, Flash Hide Functions)

What is ECU Coding?

1. Code Adaptive Data: Every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH X431 PRO3 V+ 5.0 escaner automotriz professional has the ECU coding function to recognize new actuators after you change the fault actuators or parts.
2. Recognize Replaced Modules: ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.
3. Flash Hidden Functions: This feature is used to activate hidden features that most car manufacturers include that are not available to the average car owner. Examples include corrective consumption calculation, seat belt warning, auto start/stop, hidden menus, daytime running lights, cruise control, comfort windshield washer, welcome lights, etc. To enable most of these functions, it is enough to activate them (in the car's "brain"), while for some others it is necessary to install additional missing modules in the car.
4. Advanced Customization: ECU coding goes beyond just enabling hidden features. You can delve deeper and adjust numerous parameters to personalize your vehicle’s behavior and performance according to your preferences.

Examples of ECU Coding:

• The new Ford Focus can be upgraded to a tire pressure monitoring function by flushing the ECU. This feature is especially important for those who like to drive long distances, significantly improving the safety of the car;
• Mercedes-Benz E-Series can change the much-criticized mode by brushing the ECU to improve passenger comfort;
• VW Passat can be swiped to "modify home/leave time";
• It is important to note that, due to hardware and other reasons, such as the Audi Q5, if you want to brush the "home/away function", you must have the automatic headlights function.

ECU Coding Compatibility:

• Online Coding: BMW, VW, Audi, Skoda, SEAT, Porsche, etc.
• Variant Coding: BENZ, Ford, Mazda, Vauxhall, Opel, etc.
• Flash Hidden Functions: Benz, BMW, VW, Audi, Skoda, SEAT, Porsche, Jeep, Dodge, Chrysler, Toyota, Honda, etc.

2026 The Apex Professional Automotive Bidirectional Scan Tool For Mechanics (Upgraded Version of X431 PROS V+)

OEM Topology Mapping:

 

• Compared with other high-end scanners in the market, the X431 PRO3 V+ 5.0 diagnostic scanner with topology map function car diagnose all the systems of the car in seconds, and all the healthy and unhealthy data in the car's system will be displayed, pinpointing the car's faults, greatly improves work efficiency and saves time. Other scanners, such as the X431 PROS V+ 5.0, X431 PROS Elite, X***D9, etc, need to detect and diagnose one system by one, which can't locate the automobile faults comprehensively and accurately, and reduce the working efficiency greatly. LAUNCH X431 PRO3 V+ 5.0 for repair shops, engineers, Diyers is an great investment!
• Introducing the revolutionary function of topology mapping in automotive diagnostic products! Say goodbye to guesswork and hello to precision with our advanced technology that allows you to easily identify and locate faults in your vehicle's electrical system. With topology mapping, you can quickly and accurately diagnose issues, saving you time and money on costly repairs.
• Our cutting-edge diagnostic tools provide a comprehensive view of your vehicle's electrical system, giving you a detailed map of all the components and their connections. This allows you to quickly pinpoint any faults and troubleshoot with ease. Whether you're a professional mechanic or a DIY enthusiast, our topology mapping feature is a game-changer that will take your diagnostic capabilities to the next level.
• Don't settle for outdated diagnostic tools that leave you guessing. Upgrade to our topology mapping technology and experience the future of automotive diagnostics today. With our products, you'll have the power to diagnose and fix problems with confidence, ensuring your vehicle runs smoothly and efficiently. Try it now and see the difference for yourself!
• Topology Mapping Functions with 12-in-1 Live Data Stream : You can use Launch X431 PRO3 V+ 5.0 escaner automotriz professional to view and capture real-time Live Data, get to know the current operating status for parameters, and provide insight into overall vehicle performance. There are three display modes available for data viewing: Graph, Value, and Combine. And you can display 12 data streams at the same time, providing great convenience for comparing data.

 

Diagnostic Vehicle Coverage For Other High-end Diagnostic Functions

 

1. AutoAuth for FCA, SGW: Fiat Chrysler Automobiles (FCA) implemented a secure gateway module that was introduced on a selection of their 2018 and newer model vehicles. Access to diagnostic functions requires registration and authentication through AUTOAUTH for scan tools. You can directly log AUTOAUTH account on X431 PRO3 V+ 5.0 scanner automotriz profesional and process diagnostics for FCA vehicles seamlessly.
2. Component Matching: Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.
3. Online Coding: Compatible with Volkswagen / Audi / Skoda / Seat / BMW / Porsche etc.
4. Online Calibration: Compatible with Volkswagen / Audi / Skoda / Seat etc.
5. Online Parameterization: Compatible with Volkswagen / Audi / Skoda / Seat etc.
6. VAG Guided Functions: Compatible with Volkswagen / Audi / Skoda / Seat etc.
7. Power Balance: Compatible with Chrysler / GM / Ford etc.
8. Online Account Login Service: Compatible with Volkswagen / Audi / Skoda / Seat etc.
9. Rrcode Module Installation: Compatible with Ford / Mazda etc.
10. Flash Hidden Functions: Compatible with Benz / BMW / VW / Audi / Skoda / SEAT / Porsche / Jeep / Dodge / Chrysler / Toyota / Honda etc.
11. Variant Coding: Compatible with Ford / Mazda / Vauxhall / Opel etc.

 

Choose your native language without encountering any sort of language barrier

 

• 25 languages supported: English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional.
• Thus, if you feel more comfortable with your native language, you can switch back and forth as necessary without encountering any sort of language barrier.

55+ Mechanics Frequently Used OEM Professional Maintenance Features (The Number May Exceed 200+ Depending On The Model And Year)

LAUNCH X431 PRO3 V+ 5.0 provides you with the following commonly used service functions, enabling you to quickly access the vehicle system for various regular service and maintenance performance.

1. Oil Reset – Reset the oil life systems every time the oil and oil filter are changed;
2. I-njector Coding – Code new injector numbers to replace the previous one when fitting the new i-njectors or after the replacement is completed;
3. EPB Reset – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
4. SAS Reset – Perform steering angle sensor calibration and clear records;
5. BAT battery service – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
6. ABS B-leeding – When the ABS contains a-ir, the ABS b-leeding function must be performed to b-leed the brake system to restore ABS brake sensitivity;
7. Throttle Adaptation – Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;
8. TPMS service – Tire pressure resetting is required to be performed after maintenance is performed; **Please note: The TPMS relearn function of X431 PRO3 V+ 5.0 can only be done for cars without tire pressure system, and those with tire pressure system need special TPMS reset tool to do it, such as PRO3 V+ 5.0 with TSGUN, etc.
9. Gear Learning: Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced;
10. AFS Headlamp Reset: Initialize the adaptive headlamp system.
11. Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
12. Suspension Reset: Adjust the vehicle body height sensor for level calibration.
13. Gearbox Reset; 14. Tire Reset; 15. A/F Reset; 16. Adblue Reset; 17. Initialise Power Window Regulators; 18. Seat Standardisation; 19. C-oolant B-leeding; 20. Language Change; 21. Nox Sensor Reset; 22. Stop/Start Reset; 23. Seat Calibration; 24. Transport Mode; 25. Windows Calibration; 26. AC System Relearn/Initialization; 27. High Voltage Battery Diagnostics; 28. GPF Regeneration; 29. Camshaft/Crankshaft Sensor Relearn; 30. Interactive Vehicle Dynamics (IVD) Initialization Sequence; 31. Halt/Resume Transmission Adaptive Learning; 32. Relearn Vehicle Data; 34. Initialisation Of Automatic Tailgate; 35. Normalise Slide/ Tilt Sunroof; 36. Activate ref-uel detection; 37. HFM,throttle valve,c-ooler bypass; 38. Idle adjustment; 39. Initialisation of rain-light-solar-condensations sensor; 40. CBS Reset UDS; 41. Change vehicle system language.etc.

1. Keep Growing with UPDATES !! (depending on the specific car models, not for all cars, ). and more and more functions will be improved and optimized.

2. LAUNCH scan tool X431 PRO3 V+ 5.0 developed 200+ functions for specific models. C-ompared with other diagnostic scanners that can only do the Reset functions, the bi-directional scanner can finish deeper and wider Reset, Regeneration, Initiation, Matching, Calibration, Re-placement, etc.

FCA Account Registration And Use Are Available Now In The Americas.

• AutoAuth for FCA SGW: Fiat Chrysler Automobiles (FCA) implemented a secure gateway module that was introduced on a selection of their 2018 and newer model vehicles. Access to diagnostic functions requires registration and authentication through AUTOAUTH for scan tools. You can directly log AUTOAUTH account on X431 PRO3 V+ 5.0 bidirectional scan tool and process diagnostics for FCA vehicles seamlessly.
• Bi-Directional Control: Bi-directional makes X431 PRO3 V+ 5.0 scanner automotriz more than a tool that receives information from the tool but also a tool that can send commands to control the component. In this case, it is easier for mechanics to identify and troubleshoot problems without going under the cars. Some features for your reference: Cycling the A/C, Clutch on and off, Acceleration device test, Oil pressure control test, Vehicle level position calibration, Brake Vacuum Pump, Inlet, and Outlet Valve test, Open Brakes tests, Parking brake test.
• V.A.G Guided Function: Having the boot function means that you have an expert who is ideal for your repairs. It frees you from the hassle of finding automatic channel numbers and login codes. It consists of a detailed operating guide and operating instructions. For different car models, the X431 PRO3 V+ 5.0 scanner will provide you with specific instructions on auto-login, matching, setup and coding.
• Component Matching: This function matches and synchronizes the components with each module after you replace the module, such as Gearbox Matching / Seat Matching / Headlight Fitting / Door and Window Initialization Study / Sunroof Initialization / Injector Calibration / Multimedia Video Reset / Cluster Reset / Tire Change Reset...etc.
• ADAS Calibration: LAUNCH X431 PRO3 V+ 5.0 escaner para autos is compatible with LAUNCH X431 ADAS Mobile (need to be purchased separately) to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.
• PMI: LAUNCH X431 PRO3 V+ 5.0 escaner para autos support PMI function, and is compatible with Ford /Lincoln/ Mazda etc. This function is used when you need to replace a module (replace ECU) or initialize a module.
• All Systems Diagnostics: As an universal scan tool, the LAUNCH scanner X431 PRO3 V+ 5.0 automotive obd2 scanner can diagnose all systems on 99% of vehicles on the road and does so to OE levels. The systems include but are not limited to: Engine, Transmission, Gear, Steering, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS, SRS Airbag, Camera, Gateway, Light, Battery Charging System, Head-up Display.
• Diagnostic Report: After completing the diagnostic, you can generate reports from the stored diagnostic data, which will help you further analyze faults and better manage your repair orders. You can share the report with others via e-m-ail and print it out.
• 12-in-1 Live Data Stream: You can use Launch X431 PRO3 V+ 5.0 escaner automotriz professional to view and capture real-time Live Data, get to know the current operating status for parameters, and provide insight into overall vehicle performance. There are three display modes available for data viewing: Graph, Value, and Combine. And you can display 12 data streams at the same time, providing great convenience for comparing data.
• Smart AutoVIN & AutoScan: Automatically skip the manual input of vehicle’s VIN code and head you towards the matched diagnostics on the system selected.
• Automatic Diagnostic Report Print & Share: Health Report will scan all vehicle modules and give you a status list for each modules condition .This diagnostic tool can automatically generate a diagnostic report when diagnostic work is successfully finished.The reports are saved to the internal memory for later review. The reports are able to be saved in PDF format, and as the tablet is equipped with WIFI, these can be emailed to the office or directly to the customer.
• One to One Online Feedback- In-Time Problem Solving: LAUNCH x431 scanner provides you with a Feedback function to share any problems you encounter in the process of diagnosis. We will make every effort to perform a no-delay problem solving and makes improvements on product quality according to your problems and suggestions, thus offering you a higher quality user experience.
• View History: Once a vehicle diagnosis is performed, LAUNCH X431 PRO3 V+ 5.0 will record the every detail of the diagnostic process.you can record/review/playback live data anytime .The History function provides quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch.
• Maintenance Help: Including How-to Videos, operation skills, and user manual, Q&A, Quick start guide, etc.

LAUNCH Scanner X431 PRO3 V+ 5.0 Compatible With X-431 Add-On Module, Bring You More Business!

LAUNCH X431 PRO3 V+ 5.0 diagnostic tool supports multiple extended modules (need to be purchased separately) to meet the diverse diagnostics and inspection needs of professional technicians and personal car owners for different vehicles. Below are the details:

 

• LAUNCH X431 Smartlink C module: This function enables X431 PRO3 (V+ 5.0) to do full comprehensive HD truck diagnostic functions for cars and trucks from 12V to 24V.
• LAUNCH X431 TSGUN: Perform all professional TPMS diagnostics and maintenance functions such as activating sensors, performing TPMS relearn, Launch Sensors, monitoring TPMS health status, etc.
• LAUNCH BST360 Battery Tester: Connecting with this battery tester, V+ is endowed with battery diagnostic features such as battery health test, start system test and charging health test, etc., which help you to detect battery-related issues of vehicles accurately and timely.
• LAUNCH VSP600 Videoscope: Make X431 PRO3 (V+ 5.0) a perfect tool for viewing and capturing video and still images of hard-to-reach areas.
• LAUNCH X-PROG3: Achieve diagnostic functions such as Engine and gearbox for various vehicles.
• X431 ADAS Moblie/ADAS PRO: Calibrate a wide range of camera-based & radar-based driver assistance systems.
• LAUNCH X431 Wi-Fi Printer: X431 PRO3 (V+ 5.0) can be connected to WIFI printers to print out diagnostic data or reports.
• Note: If you want to get this extra modules, just reach us, we have all modules in stock.

200000+ Vehicles Supported + CAN FD Protocol Supported + FCA Gateway Bypass + No IP Restriction +2 Years F-ree Update

200000+ Vehicles Supported, 200+ Car Makers Supported ! (Almost cars on the world) (Update car software to 2021/2022/2023/2024/2026, including cars, SUVs, minivans, 12v light-duty trucks.):

• USA: Compatible with Gm (GM/Chevy/Cadillac/Buick), USAFord, Chrysler (Chrysler/Dodge/Jeep), Willy; Australia: Compatible with Austford, Holden; Brazil: Compatible with BXFiat, BXGM;
• Europe: Compatible with Vaz, Porsche, Maserati, BMW, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR, Maxus, Iveco;
• Aisa: Compatible with (JAPAN) Acura, Daihatsu, Honda, Infiniti, Isuzu, Jpisuzu, Lexus, Mazda, Mitsubishi, Nissan, Nissan GTR, Scion, Subaru, Suzuki, Tlisuzu, Toyota; (KOREA) Daewoo, Hyundai, KIA, Samsung, Ssangyong; (CHINA) Baic, Beijing, Changan, Changan-Ford, Changcheng, Changhe, Chsuzuki, DF Peugeot, DF Honda, DF Nissan, DF XK, Flyer,BYD, Fukang, Futian,Foton, Geely, Gonow, GZ Honda, Hafei, Haoqing, HC BMW, Hmada, Huachen, Isuzu, JMC, Jacty, Jianghuai, Jiao, Jinlong, Joylong, Lifan, Liuwel-TY, Luxgen, NJ Fiat, Qirul-TY, chery, Qoros, Saicmg, Spark-TY, Trumpchi GAC, Weili, Xiaokang Dongfeng, Xili, Faw Tianjin, Xinkai, YQ Mazda, Zhongshun, Zhongtai, Zotye, Zhongxing, Xiali, Qirui_ty, CMC; (INDIA)Mahindra, Maruti, Tata; (MALAYSIA) Perodua, Proton, (IRAN) IKCO, MVM, SAIPA; (VIE) Vinfast;

What Comes with LAUNCH X431 PRO3 V+ 5.0?

• LAUNCH X-431 PRO3(V+ 5.0) Display tablet, DBSCAR VII diagnostic connector
• Test Cable: Double clamp power line (English), The cigarette lighter line(English)
• Accessories: British standard conversion head, European gauge conversion head, Power adapter,5V/5A, wire length 1.2m, with American standard conversion head
• Universal PIN envelope, User manual, quick start guide, cloud clinic car custom type A to type C USB data cable, Clipper fuse 5*20mm (4pcs), Lighter fuse 630mm (2pcs), HD15F to OBDII 16 male integrated test connector, HDB15F to HDB15F test main line (with DC)

2026 NEW UPGRADED DBSCAR VII CONNECTOR!

• The new version 5.0 of the LAUNCH X431 PRO3 (V+ 5.0) has a fresh hardware upgrade, especially for the connector. The new DBSCar VII connector supports CAN FD protocol, which covers more vehicle models. And here are the advantages of NEW DBSCAR VII CONNECTOR
• More Cars, More Fun: The CANFD Connector makes your Launch X431 PRO3 V+ 5.0 compatible with a wider range of vehicle modelS. For example: 2020-2024 GM Onix, Tracker, 2021-2024 GM Suburban, Escalade, Escalade ESV, 2024 GM Silverado, 2021-2024 Chrysler Grand Cherokee(WL), Grand Wagoneer, etc.
• Zoom-Zoom Data Transfer: With the CANFD protocol in action, data transfer becomes faster than a racecar on steroids. You'll be zapping diagnostic information from your car's brain to your diagnostic tool quicker than ever before. No more waiting around – you'll be fixing cars at supersonic speed!
• Accuracy on Steroids: The CANFD Connector gives you the power to communicate flawlessly with your car's electronic control units (ECUs). Think of it as a direct telepathic link, giving you access to a wealth of detailed diagnostic info.

So, dear friends, upgrade your diagnostic game with the Launch X431 PRO3 V+ 5.0 and its CANFD Connector – your sidekick for tackling car troubles like a true superhero. Get ready to unleash your diagnostic powers, impress your customers, and have a blast while doing it!