eBay

PRODUCT DESCRIPTION

AK Interactive Replacement Needle 0.3 mm

Stainless Steel Needle for AK9600 Top Line Airbrush

AK9601 | 0.3 mm | Stainless Steel | Original Size Replacement

🔧 What Is This?

A direct replacement 0.3 mm needle for the AK Interactive Top Line Airbrush (AK9600). This is the standard needle that ships with the airbrush — same size, same material, same specs. If your original needle is bent, worn, or damaged, this puts your airbrush back to factory condition.

Made from stainless steel, precision-ground to match the AK9600's 0.3 mm nozzle. Swap takes minutes: remove the old needle from the back of the airbrush, slide the new one in, tighten the chuck. Done.

❓ When Do You Need a New Needle?

🔍	Bent tip — The most common reason. A dropped airbrush, an accidental push against the nozzle, or rough handling during cleaning can bend the needle tip. Even a tiny bend causes an off-axis spray pattern, spitting, or uneven coverage.
⏳	Wear over time — After many hours of use, the needle tip gradually wears and loses its fine point. You'll notice the minimum line width getting wider and less controllable. A fresh needle restores precision.
💧	Paint buildup — Dried paint can bond to the needle surface, especially near the tip. If cleaning can't fully remove it and you're getting rough spray textures, a replacement needle solves the problem instantly.
🛡️	Preventive spare — Smart airbrush owners keep a spare needle in the drawer. When an accident happens mid-session, you swap and keep painting instead of stopping for a parts order.

📐 Specifications

Brand	AK Interactive
Product Name	Needle Replacement for AK9600 0.3 Top Line
Reference / SKU	AK9601
Needle Size	0.3 mm (factory standard)
Material	Stainless Steel
Contents	1× replacement needle (in protective case)
Compatible With	AK9600 Top Line Airbrush only
Condition	Brand New

🔄 AK9600 Replacement Parts Guide

SKU	Part	What It Does
AK9601 ←	Needle 0.3 mm	Like-for-like replacement of the standard needle
AK9602	Nozzle 0.3 mm	Like-for-like replacement of the standard nozzle
AK9600-02	Needle + Nozzle 0.2 mm	Upgrade set for ultra-fine detail work

💡 Tip: If your spray pattern is off and you're not sure whether the needle or nozzle is the problem, replacing both at once is the safest approach. AK sells the nozzle separately as AK9602.

💡 Pro Tips

👉	Use tweezers for removal and insertion. Never push or pull a needle with bare fingers. The tip is microscopically fine — finger pressure can bend it before you even feel resistance. Tweezers or a pin vise give you safe, controlled handling.
👉	Keep a spare in the drawer. Needles are consumable — they all bend or wear eventually. Having a spare means a mid-session accident costs you two minutes, not two weeks waiting for a replacement.
👉	Consider replacing the nozzle at the same time. If you've been running the same needle and nozzle for a long time, both may show wear. A new needle in a worn nozzle (or vice versa) can still produce a suboptimal seal and spray pattern.
👉	Clean ultrasonically for longer life. Regular ultrasonic cleaning removes dried paint buildup that hand-cleaning misses, extending needle life significantly. A small jewellery ultrasonic cleaner works perfectly.

⚠️ Worth Knowing

⚠️ AK9600 Top Line Airbrush only. This needle is precision-machined for the AK9600. It will not fit Iwata, Harder & Steenbeck, Badger, Sparmax, or other airbrush brands. Always confirm your airbrush model before ordering.

Needle only — no nozzle included. If you need both needle and nozzle, the 0.3 mm nozzle is sold separately as AK9602. For a complete 0.2 mm conversion, see AK9600-02 which includes both needle and nozzle.

Fragile tip. Handle with care — store in the protective tube when not installed, and never force it against resistance during insertion.

📦 What's in the Box

1× Stainless steel replacement needle (0.3 mm) in protective case. For AK9600 Top Line Airbrush.

🚀 Shipping & Dispatch

🚀	Same-Day Dispatch — Orders placed before 3:00 PM (Mon–Fri) are dispatched the same day.
📍	Shipped from Derby, UK — Located near the Royal Mail Superhub for fast UK-wide delivery.
📬	UK: Royal Mail 24 Tracked — Typically next-day delivery with full tracking.
🌍	International: Royal Mail International Tracked — Worldwide shipping available.

Hobby Heaven — By Hobbyists. For Hobbyists.

Family-run hobby supplies from Derby, UK. Authorised AK Interactive dealer.
We're hobbyists ourselves — every product we sell is something we'd use on our own projects.

AK Interactive Replacement Needle 0.3 mm Stainless Steel Needle for AK9600 Top Line Airbrush AK9601 | 0.3 mm | Stainless Steel | Original Size Replacement 🔧 What Is This? A direct replacement 0.3 mm needle for the AK Interactive Top Line Airbrush (AK9600). This is the standard needle that ships with the airbrush — same size, same material, same specs. If your original needle is bent, worn, or damaged, this puts your airbrush back to factory condition. Made from stainless steel, precision-ground to match the AK9600's 0.3 mm nozzle. Swap takes minutes: remove the old needle from the back of the airbrush, slide the new one in, tighten the chuck. Done. ❓ When Do You Need a New Needle? 🔍 Bent tip — The most common reason. A dropped airbrush, an accidental push against the nozzle, or rough handling during cleaning can bend the needle tip. Even a tiny bend causes an off-axis spray pattern, spitting, or uneven coverage. ⏳ Wear over time — After many hours of use, the needle tip gradually wears and loses its fine point. You'll notice the minimum line width getting wider and less controllable. A fresh needle restores precision. 💧 Paint buildup — Dried paint can bond to the needle surface, especially near the tip. If cleaning can't fully remove it and you're getting rough spray textures, a replacement needle solves the problem instantly. 🛡️ Preventive spare — Smart airbrush owners keep a spare needle in the drawer. When an accident happens mid-session, you swap and keep painting instead of stopping for a parts order. 📐 Specifications Brand AK Interactive Product Name Needle Replacement for AK9600 0.3 Top Line Reference / SKU AK9601 Needle Size 0.3 mm (factory standard) Material Stainless Steel Contents 1× replacement needle (in protective case) Compatible With AK9600 Top Line Airbrush only Condition Brand New 🔄 AK9600 Replacement Parts Guide SKU Part What It Does AK9601 ← Needle 0.3 mm Like-for-like replacement of the standard needle AK9602 Nozzle 0.3 mm Like-for-like replacement of the standard nozzle AK9600-02 Needle + Nozzle 0.2 mm Upgrade set for ultra-fine detail work 💡 Tip: If your spray pattern is off and you're not sure whether the needle or nozzle is the problem, replacing both at once is the safest approach. AK sells the nozzle separately as AK9602. 💡 Pro Tips 👉 Use tweezers for removal and insertion. Never push or pull a needle with bare fingers. The tip is microscopically fine — finger pressure can bend it before you even feel resistance. Tweezers or a pin vise give you safe, controlled handling. 👉 Keep a spare in the drawer. Needles are consumable — they all bend or wear eventually. Having a spare means a mid-session accident costs you two minutes, not two weeks waiting for a replacement. 👉 Consider replacing the nozzle at the same time. If you've been running the same needle and nozzle for a long time, both may show wear. A new needle in a worn nozzle (or vice versa) can still produce a suboptimal seal and spray pattern. 👉 Clean ultrasonically for longer life. Regular ultrasonic cleaning removes dried paint buildup that hand-cleaning misses, extending needle life significantly. A small jewellery ultrasonic cleaner works perfectly. ⚠️ Worth Knowing ⚠️ AK9600 Top Line Airbrush only. This needle is precision-machined for the AK9600. It will not fit Iwata, Harder & Steenbeck, Badger, Sparmax, or other airbrush brands. Always confirm your airbrush model before ordering. Needle only — no nozzle included. If you need both needle and nozzle, the 0.3 mm nozzle is sold separately as AK9602. For a complete 0.2 mm conversion, see AK9600-02 which includes both needle and nozzle. Fragile tip. Handle with care — store in the protective tube when not installed, and never force it against resistance during insertion. 📦 What's in the Box 1× Stainless steel replacement needle (0.3 mm) in protective case. For AK9600 Top Line Airbrush. 🚀 Shipping & Dispatch 🚀 Same-Day Dispatch — Orders placed before 3:00 PM (Mon–Fri) are dispatched the same day. 📍 Shipped from Derby, UK — Located near the Royal Mail Superhub for fast UK-wide delivery. 📬 UK: Royal Mail 24 Tracked — Typically next-day delivery with full tracking. 🌍 International: Royal Mail International Tracked — Worldwide shipping available. Hobby Heaven — By Hobbyists. For Hobbyists. Family-run hobby supplies from Derby, UK. Authorised AK Interactive dealer.We're hobbyists ourselves — every product we sell is something we'd use on our own projects.

Specifications

Brand AK Interactive
Compatible With AK9600 Top Line Airbrush only
Type Replacement Needle + Nozzle Set
Country of Origin Spain
EAN 8435568354326

ABOUT US

Welcome to Hobby Heaven!

We're a brand built by passionate hobbyists for hobbyists. Our mission is to support all your creative endeavors, whether you're into modeling, wargaming, crafting, or art. As enthusiasts ourselves, we understand the importance of quality supplies at affordable prices.

Our carefully curated selection of high-quality materials is designed to inspire and empower hobbyists and artists alike. We're particularly proud of our innovative, cost-effective basing system - a game-changer for modelers and wargamers looking for professional results without breaking the bank.

At Hobby Heaven, we're dedicated to providing exceptional customer service and ensuring your creative projects are a success. Our team is always ready to offer advice, share techniques, or help you find the perfect supplies for your next masterpiece.

Thank you for choosing us as your trusted partner in creativity. We're excited to be part of your hobby journey!

PAYMENT

We accept payment by PayPal and Credit / Debit cards entered on eBay only. You must be registered with PayPal or eBay to buy from us.

SHIPPING

We primarily use RM24 for shipping, and we can arrange other courier services upon request. For large international shipments, we utilize FedEx. Once your order has been dispatched, you will receive tracking information. For domestic deliveries, the estimated arrival time is usually 1-4 days.

RETURNS

Please ensure that all items are returned in their original condition. Returns are processed within 1-2 business days of receipt. Refunds are issued minus the original shipping cost. All returns are handled in accordance with eBay's policies.

At Hobby Heaven, we strive to provide our customers with the best possible online shopping experience. Our commitment to excellent customer service extends well beyond the delivery of your order.

We encourage you to reach out with any questions or concerns regarding your purchase. The most convenient way to contact us is through the eBay messaging system.

Our dedicated customer service team responds to messages within 24 hours, Monday through Friday, between 8:00 AM and 3:00 PM GMT.

Your satisfaction is our top priority. We're here to help and look forward to assisting you!

WHAT OUR CUSTOMERS ARE SAYING ABOUT US

All good thx	nelza333 (752 )
Great item, quickly sent. Thank you.	paosborne196 (777 )
Recommended.	fjb8 (3661 )
Perfect thank you	db19640 (589 )
Excellent thanks	reasterlow-u (1016 )