NOTE:Some vehicles require the additional use of a decoder/resistor.
Product Feature:
Energy Save: LED lights than traditional halogen energy, more power.
Long Lifespan: Xenon lamp brightness and proximity, about 6000K. But the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact, effectively protecting the car comes with a battery, improving the battery life of more than 30%.
Features: Fast cooling, the appearance of the most advanced design, thermal structure ingenious, and reasonable. Less warranty, power driver with wide voltage constant current mode, the car can respond to a variety of voltage instability, the effective protection of normal use Led efficient and simple structure. Fewer Components damaged, repair the probability is very low, compared with HID ballast repair lower than 80%.
Safe: The heating temperature is low, protect the car. Xenon working temperature up to 800 ° -1000 °, the main reason for the car ignition.
Design: LED car lights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates.
Energy Save: LED lights than traditional halogen energy, more power.
Long Lifespan: Xenon lamp brightness and proximity, about 6000K. But the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact, effectively protecting the car comes with a battery, improving the battery life of more than 30%.
Features: Fast cooling, the appearance of the most advanced design, thermal structure ingenious, and reasonable. Less warranty, power driver with wide voltage constant current mode, the car can respond to a variety of voltage instability, the effective protection of normal use Led efficient and simple structure. Fewer Components damaged, repair the probability is very low, compared with HID ballast repair lower than 80%.
Safe: The heating temperature is low, protect the car. Xenon working temperature up to 800 ° -1000 °, the main reason for the car ignition.
Design: LED car lights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates.
Specifications:
Condition: Brand New / Never Used
Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
Power: 50W/per bulb,100W/Pair
Lumen: 5000LM/bulb,10000LM/Pair
IP Rate: IP68
Color Temperature: 6500K White
Beam Angle: 360°
Operating Temperature: -40 - +105°C
Lifespan: 50,000+ working hours
Number of Bulbs: 6
To Fit: Headlights Kit+Fog Light
Placement on Vehicle: Left,Right,Front
Material: Aluminum alloy
Application: Headlight (High + Low Beam)+Fog Light Bulbs Kit
Condition: Brand New / Never Used
Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
Power: 50W/per bulb,100W/Pair
Lumen: 5000LM/bulb,10000LM/Pair
IP Rate: IP68
Color Temperature: 6500K White
Beam Angle: 360°
Operating Temperature: -40 - +105°C
Lifespan: 50,000+ working hours
Number of Bulbs: 6
To Fit: Headlights Kit+Fog Light
Placement on Vehicle: Left,Right,Front
Material: Aluminum alloy
Application: Headlight (High + Low Beam)+Fog Light Bulbs Kit
Package Content:
2 x H7 LED Headlights High Beam Bulbs
2 x H7 LED Headlights Low Beam Bulbs
2 x H11 Fog Light Bulbs
2 x H7 LED Headlights High Beam Bulbs
2 x H7 LED Headlights Low Beam Bulbs
2 x H11 Fog Light Bulbs
SOME PROBLEMS FROM CUSTOMERS:
Q1: WHY MY LIGHTS ARE SO DIM ?
A: Most of the customers responded very brightly, and there have been a few customers who were in the same situation as you, and the reaction was not very bright. Later, after we fully understood, we found that because this light bulb is LED, the voltage requirement must reach 12-36V (brightness). brighter with higher voltage), while your raw halogen bulbs only need 9V to light up.
Because we send it out after 100% inspection before delivery, it is most likely caused by the insufficient voltage of your original lamp system. It is recommended that you or go to a professional auto repair shop to change the voltage of the bulb system, so that the lights can run brighter.
Q2: WHY THEY CANNOT BE LIGHTENED ?
A:This happens because your original halogen car lights have no positive and negative poles, but this is an LED light, which has positive and negative poles. A small number of customers (such as your car) happen to have the opposite positive and negative poles of our lights, which leads to non-lighting.
Don't worry, this situation is very easy to solve! You only need to lead a wire out of the positive and negative poles and reverse them to make the light bright. If you can't operate it yourself, we suggest that you can go to a professional auto repair shop to modify it, thank you!
Q1: WHY MY LIGHTS ARE SO DIM ?
A: Most of the customers responded very brightly, and there have been a few customers who were in the same situation as you, and the reaction was not very bright. Later, after we fully understood, we found that because this light bulb is LED, the voltage requirement must reach 12-36V (brightness). brighter with higher voltage), while your raw halogen bulbs only need 9V to light up.
Because we send it out after 100% inspection before delivery, it is most likely caused by the insufficient voltage of your original lamp system. It is recommended that you or go to a professional auto repair shop to change the voltage of the bulb system, so that the lights can run brighter.
Q2: WHY THEY CANNOT BE LIGHTENED ?
A:This happens because your original halogen car lights have no positive and negative poles, but this is an LED light, which has positive and negative poles. A small number of customers (such as your car) happen to have the opposite positive and negative poles of our lights, which leads to non-lighting.
Don't worry, this situation is very easy to solve! You only need to lead a wire out of the positive and negative poles and reverse them to make the light bright. If you can't operate it yourself, we suggest that you can go to a professional auto repair shop to modify it, thank you!