eBay

PRODUCT DESCRIPTION

AK Interactive Cutting Tweezers — Flat Head

Precision Stainless Steel Tweezers That Grip & Cut in One Motion

AK9331 | Stainless Steel | For Scale Modelling, Resin & 3D Prints

🔧 What Is This Tool?

The AK9331 is a hybrid cutting tweezer — a tool that combines the precision grip of modelling tweezers with the cutting ability of a flush cutter, all in one slim, stainless steel instrument. The flat, sharpened tip doesn't just hold parts — it cuts through them cleanly with a controlled, linear shearing action.

Designed specifically for scale modellers and miniature hobbyists, it excels at tasks where standard side cutters are too bulky to reach or too aggressive for the material. Think of it as a scalpel-meets-tweezer: precise enough for detail work, strong enough to cut through resin supports, thin plastic, wire, and photo-etch.

If you've ever struggled to remove 3D-printed supports from a delicate resin miniature without damaging the surface — this is the tool built for that exact job.

✅ Why You'll Reach for These Constantly

⚡	Grip + Cut in One Step — No more switching between tweezers and cutters. Grab the part, squeeze, it's cut. Halves the time on repetitive cleanup tasks like support removal.
🎯	Flat Head = Controlled Cuts — The flat, bevelled tip gives a wide, linear cutting edge rather than a pinch-point. Less risk of the blade wandering into your model compared to pointed-tip cutters.
🔩	Stainless Steel Construction — Corrosion-resistant, durable, and easy to clean. Won't rust even if you leave it on your hobby desk for months (as we all do).
📐	Slim Profile, Big Reach — The tapered body fits into tight spaces that standard nippers can't access: recessed areas, between limbs, under cloaks, inside vehicle interiors.
🛡️	Gentle on Delicate Parts — Where side cutters can crush or deform thin plastic, the tweezer action applies force gradually. You feel the resistance before the cut, giving you full control.

🎯 What It's Built For

3D Print Support Removal	The primary use case. Clip resin supports cleanly from SLA/DLP prints without scarring the model surface. The flat head gives you a flush cut right at the connection point.
Photo-Etch Work	Separate delicate PE parts from frets without bending them. The tweezer grip holds the part steady while the cutting edge severs the connection tab.
Fine Wire & Cable	Trim soft wire, thin copper rod, rigging thread, and similar materials. Ideal for antenna wires, tow cables, and scratch-built details.
Thin Plastic & Foil	Cut thin styrene sheet, masking film, decal edges, and similar sheet materials with tweezers-level precision.
Basing & Diorama Details	Trim resin basing bits (like AK Basing Bits), small tufts, scatter pieces, and terrain accessories to fit your base layout.

📐 Specifications

Brand	AK Interactive
Product Name	Cutting Tweezers — Flat Head
Reference / SKU	AK9331
Material	Stainless Steel
Tip Style	Flat, bevelled cutting edge
Type	Cutting Tweezers (hybrid grip + cut)
Primary Use	3D print support removal, photo-etch, fine wire, thin plastic
Suitable For	Scale modelling, miniature painting, wargaming, dioramas
Condition	Brand New, Factory Sealed

💡 Pro Tips

👉	Let the tool do the work. Don't force-squeeze like you would with sprue cutters. Apply gentle, progressive pressure — you'll feel the cutting edge engage before it shears through. This gives you a cleaner cut with less stress on the tool and the part.
👉	Perfect partner for resin miniatures. If you're working with resin kits or 3D-printed models from Loot Studios, MyMiniFactory, or similar STL sources, these will quickly become your go-to for removing support structures without damaging fine detail.
👉	Not a replacement for sprue cutters. These excel at fine work and soft materials. For cutting thick plastic sprues or hard metal, use dedicated nippers (like the AK Interactive Side Cutter or Tamiya Sharp Pointed Side Cutter). The flat head is designed for precision, not brute force.
👉	Keep the cutting edge clean. Wipe the tip with a dry cloth after use. Resin dust and adhesive residue can build up on the cutting edge over time and reduce sharpness.

⚠️ Worth Knowing

Not for hard materials. These are designed for soft wire, thin plastic, resin supports, photo-etch, and similar light-duty materials. Attempting to cut thick metal rod, hard sprue gates, or brass tube will damage the cutting edge. For those jobs, use proper side cutters.

Flat head, not pointed. If you need ultra-fine pointed tweezers for placing tiny decals or picking up individual parts, AK's standard precision tweezers (pointed tip) are better suited. The flat head on the AK9331 is specifically designed for cutting — the trade-off is a wider tip that's less precise for delicate pick-and-place work.

📦 What's in the Box

1 × AK Interactive Cutting Tweezers Flat Head (AK9331) in retail blister packaging.

🚀 Shipping & Dispatch

🚀	Same-Day Dispatch — Orders placed before 3:00 PM (Mon–Fri) are dispatched the same day.
📍	Shipped from Derby, UK — Located near the Royal Mail Superhub for fast UK-wide delivery.
📬	UK: Royal Mail 24 Tracked — Typically next-day delivery with full tracking.
🌍	International: Royal Mail International Tracked — Worldwide shipping available.

Hobby Heaven — By Hobbyists. For Hobbyists.

Family-run hobby supplies from Derby, UK. Authorised AK Interactive dealer.
We're hobbyists ourselves — every product we sell is something we'd use on our own projects.

AK Interactive Cutting Tweezers — Flat Head Precision Stainless Steel Tweezers That Grip & Cut in One Motion AK9331 | Stainless Steel | For Scale Modelling, Resin & 3D Prints 🔧 What Is This Tool? The AK9331 is a hybrid cutting tweezer — a tool that combines the precision grip of modelling tweezers with the cutting ability of a flush cutter, all in one slim, stainless steel instrument. The flat, sharpened tip doesn't just hold parts — it cuts through them cleanly with a controlled, linear shearing action. Designed specifically for scale modellers and miniature hobbyists, it excels at tasks where standard side cutters are too bulky to reach or too aggressive for the material. Think of it as a scalpel-meets-tweezer: precise enough for detail work, strong enough to cut through resin supports, thin plastic, wire, and photo-etch. If you've ever struggled to remove 3D-printed supports from a delicate resin miniature without damaging the surface — this is the tool built for that exact job. ✅ Why You'll Reach for These Constantly ⚡ Grip + Cut in One Step — No more switching between tweezers and cutters. Grab the part, squeeze, it's cut. Halves the time on repetitive cleanup tasks like support removal. 🎯 Flat Head = Controlled Cuts — The flat, bevelled tip gives a wide, linear cutting edge rather than a pinch-point. Less risk of the blade wandering into your model compared to pointed-tip cutters. 🔩 Stainless Steel Construction — Corrosion-resistant, durable, and easy to clean. Won't rust even if you leave it on your hobby desk for months (as we all do). 📐 Slim Profile, Big Reach — The tapered body fits into tight spaces that standard nippers can't access: recessed areas, between limbs, under cloaks, inside vehicle interiors. 🛡️ Gentle on Delicate Parts — Where side cutters can crush or deform thin plastic, the tweezer action applies force gradually. You feel the resistance before the cut, giving you full control. 🎯 What It's Built For 3D Print Support Removal The primary use case. Clip resin supports cleanly from SLA/DLP prints without scarring the model surface. The flat head gives you a flush cut right at the connection point. Photo-Etch Work Separate delicate PE parts from frets without bending them. The tweezer grip holds the part steady while the cutting edge severs the connection tab. Fine Wire & Cable Trim soft wire, thin copper rod, rigging thread, and similar materials. Ideal for antenna wires, tow cables, and scratch-built details. Thin Plastic & Foil Cut thin styrene sheet, masking film, decal edges, and similar sheet materials with tweezers-level precision. Basing & Diorama Details Trim resin basing bits (like AK Basing Bits), small tufts, scatter pieces, and terrain accessories to fit your base layout. 📐 Specifications Brand AK Interactive Product Name Cutting Tweezers — Flat Head Reference / SKU AK9331 Material Stainless Steel Tip Style Flat, bevelled cutting edge Type Cutting Tweezers (hybrid grip + cut) Primary Use 3D print support removal, photo-etch, fine wire, thin plastic Suitable For Scale modelling, miniature painting, wargaming, dioramas Condition Brand New, Factory Sealed 💡 Pro Tips 👉 Let the tool do the work. Don't force-squeeze like you would with sprue cutters. Apply gentle, progressive pressure — you'll feel the cutting edge engage before it shears through. This gives you a cleaner cut with less stress on the tool and the part. 👉 Perfect partner for resin miniatures. If you're working with resin kits or 3D-printed models from Loot Studios, MyMiniFactory, or similar STL sources, these will quickly become your go-to for removing support structures without damaging fine detail. 👉 Not a replacement for sprue cutters. These excel at fine work and soft materials. For cutting thick plastic sprues or hard metal, use dedicated nippers (like the AK Interactive Side Cutter or Tamiya Sharp Pointed Side Cutter). The flat head is designed for precision, not brute force. 👉 Keep the cutting edge clean. Wipe the tip with a dry cloth after use. Resin dust and adhesive residue can build up on the cutting edge over time and reduce sharpness. ⚠️ Worth Knowing Not for hard materials. These are designed for soft wire, thin plastic, resin supports, photo-etch, and similar light-duty materials. Attempting to cut thick metal rod, hard sprue gates, or brass tube will damage the cutting edge. For those jobs, use proper side cutters. Flat head, not pointed. If you need ultra-fine pointed tweezers for placing tiny decals or picking up individual parts, AK's standard precision tweezers (pointed tip) are better suited. The flat head on the AK9331 is specifically designed for cutting — the trade-off is a wider tip that's less precise for delicate pick-and-place work. 📦 What's in the Box 1 × AK Interactive Cutting Tweezers Flat Head (AK9331) in retail blister packaging. 🚀 Shipping & Dispatch 🚀 Same-Day Dispatch — Orders placed before 3:00 PM (Mon–Fri) are dispatched the same day. 📍 Shipped from Derby, UK — Located near the Royal Mail Superhub for fast UK-wide delivery. 📬 UK: Royal Mail 24 Tracked — Typically next-day delivery with full tracking. 🌍 International: Royal Mail International Tracked — Worldwide shipping available. Hobby Heaven — By Hobbyists. For Hobbyists. Family-run hobby supplies from Derby, UK. Authorised AK Interactive dealer.We're hobbyists ourselves — every product we sell is something we'd use on our own projects.

Specifications

Brand AK Interactive
Tip Style Flat Head
Type Cutting Tweezers
MPN AK9331
Suitable For Scale Modelling, Miniature Painting, Wargaming, Dioramas
Country of Origin Spain
EAN 8435568337565

ABOUT US

Welcome to Hobby Heaven!

We're a brand built by passionate hobbyists for hobbyists. Our mission is to support all your creative endeavors, whether you're into modeling, wargaming, crafting, or art. As enthusiasts ourselves, we understand the importance of quality supplies at affordable prices.

Our carefully curated selection of high-quality materials is designed to inspire and empower hobbyists and artists alike. We're particularly proud of our innovative, cost-effective basing system - a game-changer for modelers and wargamers looking for professional results without breaking the bank.

At Hobby Heaven, we're dedicated to providing exceptional customer service and ensuring your creative projects are a success. Our team is always ready to offer advice, share techniques, or help you find the perfect supplies for your next masterpiece.

Thank you for choosing us as your trusted partner in creativity. We're excited to be part of your hobby journey!

PAYMENT

We accept payment by PayPal and Credit / Debit cards entered on eBay only. You must be registered with PayPal or eBay to buy from us.

SHIPPING

We primarily use RM24 for shipping, and we can arrange other courier services upon request. For large international shipments, we utilize FedEx. Once your order has been dispatched, you will receive tracking information. For domestic deliveries, the estimated arrival time is usually 1-4 days.

RETURNS

Please ensure that all items are returned in their original condition. Returns are processed within 1-2 business days of receipt. Refunds are issued minus the original shipping cost. All returns are handled in accordance with eBay's policies.

At Hobby Heaven, we strive to provide our customers with the best possible online shopping experience. Our commitment to excellent customer service extends well beyond the delivery of your order.

We encourage you to reach out with any questions or concerns regarding your purchase. The most convenient way to contact us is through the eBay messaging system.

Our dedicated customer service team responds to messages within 24 hours, Monday through Friday, between 8:00 AM and 3:00 PM GMT.

Your satisfaction is our top priority. We're here to help and look forward to assisting you!

WHAT OUR CUSTOMERS ARE SAYING ABOUT US

As listed, well packed and prompt delivery - good to do business with	fat_paulie_g (1676 )
Perfect Seller	warhmagy_0 (73 )
Great item, quickly sent. Thank you.	paosborne196 (777 )
Nicely printed bases	alanb63 (503 )
5* seller, thank you!	bazzer10000 (1674 )