PRODUCT DESCRIPTION

Gaahleri GHPM-Mobius SP 0.3 & 0.5mm Siphon Airbrush | Hobby Heaven

Hobby Heaven · By Hobbyists, For Hobbyists

🎯 Gaahleri GHPM‑Mobius SP · 0.3 & 0.5 mm

Siphon‑Feed Dual‑Action · Dual Nozzles · Glass Bottle · Works from 15 PSI

⚙️ 0.3 + 0.5 mm 🍶 Siphon‑Feed 💨 From 15 PSI 🌀 MAC Spiral Nozzle 🔧 Dual‑Action

🔍 What Is This?

The siphon‑feed Mobius. Same dual‑action precision as the gravity‑fed Mobius lineup, but with a glass bottle siphon system for higher paint capacity and quick colour swaps. Ships with two nozzle/needle sets (0.3 mm + 0.5 mm) and works from as low as 15 PSI — unusually low for a siphon airbrush. Built for users who want gravity‑level atomisation with siphon‑feed convenience.

🍶 Why Siphon? What's Different from Gravity?

More paint, fewer refills

A siphon bottle holds significantly more paint than a gravity cup. Means less stopping to reload when basecoating large models, terrain, or doing extended coverage work.

Instant colour changes

Pre‑mix multiple bottles — swap them out instead of flushing the cup. If you work with 5–10 colours per session, this saves real time.

Works from 15 PSI

Most siphon airbrushes need 20+ PSI to draw paint reliably. The Mobius SP works from 15 PSI — less overspray, better control on detail work, and compatible with smaller compressors.

👤 Who Is It For?

✅ Great fit

Painters who work on large surfaces and need high paint capacity — terrain, dioramas, vehicle bodies, canvases, backgrounds — but also want to switch to detail mode (0.3 mm) without changing airbrush. Also ideal if you frequently swap between many pre‑mixed colours and want fast bottle changes over cup flushing.

⚠️ Less ideal

If you primarily paint small miniatures and rarely need more than 10 ml of a single colour, a standard gravity cup is simpler and lighter. If you need extreme 0.2 mm micro‑detail, a dedicated gravity fine‑line airbrush is still the better tool for that specific job.

⚖️ Two Nozzles, Two Modes

	🔬 0.3 mm	🎯 0.5 mm (Spiral MAC)
Fine lines	✅ Good (gravity‑like)	Limited
Blending	✅ Smooth, controlled	Good, broad
Coverage speed	Moderate	✅ Very fast
Primers / varnish	Possible (thin well)	✅ Built for it
Min. PSI	✅ From 15 PSI	~20 PSI recommended
Best for	Detail, preshading, minis, line work	Large surfaces, primers, backgrounds, terrain

💡 The 0.5 mm set uses the Spiral MAC nozzle and is fully cross‑compatible with other Mobius airbrushes — one spare fits across your Mobius collection.

🛠️ What Makes It Different

🍶 Glass Siphon Bottle	Metal‑capped glass bottle — easy to clean, won't degrade from solvents like plastic, and seals properly every time. Buy extra bottles to pre‑mix colours and swap them in seconds.
💨 15 PSI Minimum	Most siphons struggle below 20 PSI. The Mobius SP's air channel design lets it draw paint reliably from 15 PSI — less overspray, better fine control, and works with smaller/quieter compressors.
🌀 Spiral MAC Nozzle (0.5)	Spiral micro air channel on the 0.5 mm nozzle — optimised for high‑volume, high‑efficiency coverage. Fast, even coating with stable atomisation across the full pattern.
◼️ Redesigned Lever	Larger finger contact surface with refined angles — smoother action and less fatigue than standard levers, especially during long coverage runs.
📐 Angled Air Valve	Air valve positioned at an angle so your hand doesn't clash with the siphon bottle below. Small design detail that makes a real difference in grip comfort.
⚖️ Aluminium Tail Grip	Anodised aluminium rear grip (purple‑blue Gaahleri finish) — lightweight, shifts balance slightly forward to compensate for the siphon bottle weight below. More comfortable than tail‑heavy designs.

📋 Technical Specifications

Type	Dual‑Action, Internal Mix, Siphon‑Feed
Nozzles Included	0.3 mm + 0.5 mm (Spiral MAC)
Working Pressure	15–40 PSI (1–2.7 bar) · stable from 15 PSI
Feed System	Glass siphon bottle, metal cap + metal fittings
Trigger	Redesigned top‑lever with wider contact surface
Air Valve	Angled — clears siphon bottle for natural grip
Rear Grip	Anodised aluminium (purple‑blue), forward‑biased balance
0.5 mm Compatibility	Cross‑compatible with other Mobius airbrushes
Best For	Large surfaces + detail · high‑capacity siphon work · multi‑colour sessions

⚠️ Honest Heads‑Up

More Parts to Clean

Siphon bottle + metal cap + metal fittings + dip tube = more components to flush and maintain than a simple gravity cup. The glass cleans easily, but the routine is longer. If you value absolute simplicity, a gravity‑feed Mobius is less hassle.

Siphon Adds Weight Below

A full bottle hangs below the airbrush — changes the balance and feel compared to a gravity‑feed. The angled valve and forward‑weighted aluminium tail help, but it's different. If you've never used a siphon, try holding your airbrush with a small weight underneath to see if the feel suits you.

0.3 mm Siphon ≠ 0.2 mm Gravity

The 0.3 mm gives you gravity‑like precision in a siphon body — impressive for the format. But for extreme micro‑detail (sub‑0.2 mm freehand), a dedicated gravity fine‑line airbrush still has the edge.

📦 Shipping & Support

🇬🇧 UK Shipping: Royal Mail 24 Tracked · Dispatched Mon–Fri

🌍 International: Available — check listing for rates

💬 Questions? Message us — we're hobbyists ourselves and happy to help you pick the right Mobius for your workflow.

🎨 Hobby Heaven

By Hobbyists. For Hobbyists.

Gaahleri™ and GHPM‑Mobius™ are trademarks of their respective owners. Hobby Heaven is not affiliated with Gaahleri — we are an independent retailer.

Gaahleri GHPM-Mobius SP 0.3 & 0.5mm Siphon Airbrush | Hobby Heaven Hobby Heaven · By Hobbyists, For Hobbyists 🎯 Gaahleri GHPM‑Mobius SP · 0.3 & 0.5 mm Siphon‑Feed Dual‑Action · Dual Nozzles · Glass Bottle · Works from 15 PSI ⚙️ 0.3 + 0.5 mm 🍶 Siphon‑Feed 💨 From 15 PSI 🌀 MAC Spiral Nozzle 🔧 Dual‑Action 🔍 What Is This? The siphon‑feed Mobius. Same dual‑action precision as the gravity‑fed Mobius lineup, but with a glass bottle siphon system for higher paint capacity and quick colour swaps. Ships with two nozzle/needle sets (0.3 mm + 0.5 mm) and works from as low as 15 PSI — unusually low for a siphon airbrush. Built for users who want gravity‑level atomisation with siphon‑feed convenience. 🍶 Why Siphon? What's Different from Gravity? More paint, fewer refills A siphon bottle holds significantly more paint than a gravity cup. Means less stopping to reload when basecoating large models, terrain, or doing extended coverage work. Instant colour changes Pre‑mix multiple bottles — swap them out instead of flushing the cup. If you work with 5–10 colours per session, this saves real time. Works from 15 PSI Most siphon airbrushes need 20+ PSI to draw paint reliably. The Mobius SP works from 15 PSI — less overspray, better control on detail work, and compatible with smaller compressors. 👤 Who Is It For? ✅ Great fit Painters who work on large surfaces and need high paint capacity — terrain, dioramas, vehicle bodies, canvases, backgrounds — but also want to switch to detail mode (0.3 mm) without changing airbrush. Also ideal if you frequently swap between many pre‑mixed colours and want fast bottle changes over cup flushing. ⚠️ Less ideal If you primarily paint small miniatures and rarely need more than 10 ml of a single colour, a standard gravity cup is simpler and lighter. If you need extreme 0.2 mm micro‑detail, a dedicated gravity fine‑line airbrush is still the better tool for that specific job. ⚖️ Two Nozzles, Two Modes 🔬 0.3 mm 🎯 0.5 mm (Spiral MAC) Fine lines ✅ Good (gravity‑like) Limited Blending ✅ Smooth, controlled Good, broad Coverage speed Moderate ✅ Very fast Primers / varnish Possible (thin well) ✅ Built for it Min. PSI ✅ From 15 PSI ~20 PSI recommended Best for Detail, preshading, minis, line work Large surfaces, primers, backgrounds, terrain 💡 The 0.5 mm set uses the Spiral MAC nozzle and is fully cross‑compatible with other Mobius airbrushes — one spare fits across your Mobius collection. 🛠️ What Makes It Different 🍶 Glass Siphon Bottle Metal‑capped glass bottle — easy to clean, won't degrade from solvents like plastic, and seals properly every time. Buy extra bottles to pre‑mix colours and swap them in seconds. 💨 15 PSI Minimum Most siphons struggle below 20 PSI. The Mobius SP's air channel design lets it draw paint reliably from 15 PSI — less overspray, better fine control, and works with smaller/quieter compressors. 🌀 Spiral MAC Nozzle (0.5) Spiral micro air channel on the 0.5 mm nozzle — optimised for high‑volume, high‑efficiency coverage. Fast, even coating with stable atomisation across the full pattern. ◼️ Redesigned Lever Larger finger contact surface with refined angles — smoother action and less fatigue than standard levers, especially during long coverage runs. 📐 Angled Air Valve Air valve positioned at an angle so your hand doesn't clash with the siphon bottle below. Small design detail that makes a real difference in grip comfort. ⚖️ Aluminium Tail Grip Anodised aluminium rear grip (purple‑blue Gaahleri finish) — lightweight, shifts balance slightly forward to compensate for the siphon bottle weight below. More comfortable than tail‑heavy designs. 📋 Technical Specifications Type Dual‑Action, Internal Mix, Siphon‑Feed Nozzles Included 0.3 mm + 0.5 mm (Spiral MAC) Working Pressure 15–40 PSI (1–2.7 bar) · stable from 15 PSI Feed System Glass siphon bottle, metal cap + metal fittings Trigger Redesigned top‑lever with wider contact surface Air Valve Angled — clears siphon bottle for natural grip Rear Grip Anodised aluminium (purple‑blue), forward‑biased balance 0.5 mm Compatibility Cross‑compatible with other Mobius airbrushes Best For Large surfaces + detail · high‑capacity siphon work · multi‑colour sessions ⚠️ Honest Heads‑Up More Parts to Clean Siphon bottle + metal cap + metal fittings + dip tube = more components to flush and maintain than a simple gravity cup. The glass cleans easily, but the routine is longer. If you value absolute simplicity, a gravity‑feed Mobius is less hassle. Siphon Adds Weight Below A full bottle hangs below the airbrush — changes the balance and feel compared to a gravity‑feed. The angled valve and forward‑weighted aluminium tail help, but it's different. If you've never used a siphon, try holding your airbrush with a small weight underneath to see if the feel suits you. 0.3 mm Siphon ≠ 0.2 mm Gravity The 0.3 mm gives you gravity‑like precision in a siphon body — impressive for the format. But for extreme micro‑detail (sub‑0.2 mm freehand), a dedicated gravity fine‑line airbrush still has the edge. 📦 Shipping & Support 🇬🇧 UK Shipping: Royal Mail 24 Tracked · Dispatched Mon–Fri 🌍 International: Available — check listing for rates 💬 Questions? Message us — we're hobbyists ourselves and happy to help you pick the right Mobius for your workflow. 🎨 Hobby Heaven By Hobbyists. For Hobbyists. Gaahleri™ and GHPM‑Mobius™ are trademarks of their respective owners. Hobby Heaven is not affiliated with Gaahleri — we are an independent retailer.

Specifications

Custom Bundle Yes (includes bonus HHP-1001 Masking Putty)
MPN GHPM-Mobius-SP
Action Type Dual-Action
Feed Type Siphon Feed
Suitable For Models, Miniatures, Terrain, Primers, Varnish
Brand Gaahleri
Paint Container Glass Siphon Bottle
Noozle System Spiral MAC (Micro Air Channel)
Item Airbrushing
Type Airbrush
Working Pressure Approx. 15–40 PSI (1–2.7 Bar)
Country of Origin China
EAN 6975834943004

ABOUT US

Welcome to Hobby Heaven!

We're a brand built by passionate hobbyists for hobbyists. Our mission is to support all your creative endeavors, whether you're into modeling, wargaming, crafting, or art. As enthusiasts ourselves, we understand the importance of quality supplies at affordable prices.

Our carefully curated selection of high-quality materials is designed to inspire and empower hobbyists and artists alike. We're particularly proud of our innovative, cost-effective basing system - a game-changer for modelers and wargamers looking for professional results without breaking the bank.

At Hobby Heaven, we're dedicated to providing exceptional customer service and ensuring your creative projects are a success. Our team is always ready to offer advice, share techniques, or help you find the perfect supplies for your next masterpiece.

Thank you for choosing us as your trusted partner in creativity. We're excited to be part of your hobby journey!

PAYMENT

We accept payment by PayPal and Credit / Debit cards entered on eBay only. You must be registered with PayPal or eBay to buy from us.

SHIPPING

We primarily use RM24 for shipping, and we can arrange other courier services upon request. For large international shipments, we utilize FedEx. Once your order has been dispatched, you will receive tracking information. For domestic deliveries, the estimated arrival time is usually 1-4 days.

RETURNS

Please ensure that all items are returned in their original condition. Returns are processed within 1-2 business days of receipt. Refunds are issued minus the original shipping cost. All returns are handled in accordance with eBay's policies.

At Hobby Heaven, we strive to provide our customers with the best possible online shopping experience. Our commitment to excellent customer service extends well beyond the delivery of your order.

We encourage you to reach out with any questions or concerns regarding your purchase. The most convenient way to contact us is through the eBay messaging system.

Our dedicated customer service team responds to messages within 24 hours, Monday through Friday, between 8:00 AM and 3:00 PM GMT.

Your satisfaction is our top priority. We're here to help and look forward to assisting you!

WHAT OUR CUSTOMERS ARE SAYING ABOUT US

As listed, well packed and prompt delivery - good to do business with	fat_paulie_g (1676 )
Nicely printed bases	alanb63 (503 )
great service	macro_3341 (766 )
Fine product and well packaged	anthonykwebs (497 )
Nice product, fast shipping. Thank you	pete1982piot (2023 )