• FITMENT:
  • 1993-2016 Dodge Viper 1991-2004 Dodge Dakota 1997-2003 Dodge Durango
  •  
  • SPECIFICATION:
  • Spacer Thickness:1.25 inch or 32 mm
  • Bolt Shack Length:32 mm
  • Torqued Down By Hand At:75-85 FT/LBS
  • Hub Bore:73.1 mm
  • Number of Pieces: 2
  •  
  • Position: Front+Rear+Left+Right
  •  
  • NOTE:
  • 2 Pcs 6x4.5 1.25" Conversion Wheel Adapters to 6x5.5 For 1991-2004 Dodge Dakota

    FITMENT:

    1993-2016 Dodge Viper
    1991-2004 Dodge Dakota
    1997-2003 Dodge Durango

     

    SPECIFICATION:

    Spacer Thickness:1.25 inch or 32 mm

    Bolt Shack Length:32 mm

    Torqued Down By Hand At:75-85 FT/LBS

    Hub Bore:73.1 mm

    Number of Pieces: 2

     

    Position:
    Front+Rear+Left+Right

     

    NOTE:

    1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
    2. Measure the fender gap and stock bolt length to choose suitable thickness.(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
    3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
    4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
    5. Returns are only accepted if unused and not  installed.(returns are not accepted if spacers-adapters have been installed to your vehicle).

    ?

    What are Wheel Spacers?

    Also known as wheel adapters, wheel spacers are special components that help create extra wheel track width. They are fitted between the wheel hub assembly and the wheel itself to increase space. Every wheel gets displaced outward by a distance equal to the spacer’s thickness. 

     

    As aforementioned, the primary purpose of wheel spacers is to increase space between the hub assembly and the wheel. It usually is not appropriate for the wheel to be very close to other inner parts like the wheel well. It will lower the driving performance, especially when the tyre rubs against the suspension components when making turns.

     

    Wheel spacers are primarily used in vehicles with wider tyres during custom installation, where the tyres you are installing are larger than the tyres that came with the car. As a result, wheel spacers improve vehicle handling and provide better traction on the road.

     

    STEPS TO PROPERLY INSTALL WHEEL SPACERS:

    Step 1: Preparation

    Step 2: Loosen All Lug Nuts

    Step 3: Lift the Car

    Step 4: Remove the Wheel

    Step 5: Prepare the Wheel Hub

    Step 6: Install the Wheel Spacer

    Step 7: Torque the Matching Lug Nuts Tighten using the star pattern as shown below when following the numbers in order.

    Step 8: Remount the Wheel

    Step 9: Carefully Lower the Vehicle

    Step 10: Torque the Lug Nuts to Specification

    Step 11: Repeat Steps 1-10 for the Remaining Wheels

     


    Item Specifics
    Brand luxfineparts
    Manufacturer Part Number 13361615
    Manufacturer Warranty 1 Year
    Type Wheel Adapter
    Quantity 2pcs
    Thickness 1.25" or 32mm
    Interchange Part Number For Dodge Durango, Dakota, Viper 6x4.5 models
    Surface Finish CNC Machined Polished Aluminum Finish
    Material High Quality t6 6061 Billet Aluminum
    Wheel Bolt Pattern 6x5.5" or 6x139.7mm
    Vehicle Bolt Pattern 6x4.5" or 6x114.3mm
    Thread Pitch 1/2"x20 or 1/2" UNF
    Color Black
    Hub Center Bore 73.1mm
    Hubcentirc No
    Stud Grade 10.9
    Surface Finish CNC Machined Polished Aluminum Finish
    Package Gross Weight 8.91lb
    Lug Patterns 6 Lugs
    Torqued Down By Hand At 75-85 FT/LBS
    Bolt Shank Length 32mm
    Outer Diameter 175mm
    Note NOT for original wheel, Only work with 6x5.5"(6x139.7mm) Wheel

    Payment

    Any payments that will be accpeted by eBay are all available.

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.


    2.USPS, UPS, FedEx shipping will be provided.


    3.We will provide you with a logistics tracking number.


    4.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you tell us the new address within 12 hours after payment.

    Returns

    30-day free return provided.

    Contact Us

    Any quesiton or problem, do contact us please.


    We are always online to answer.


    Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.

    About Us

    We are committed to the production and sales of high quality autoparts, if you cannot find what you need in our store, just contact us, we will find the right part for you.

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    2 Pcs 6x4.5 1.25" Conversion Wheel Adapters to 6x5.5 For 1991-2004 Dodge Dakota

    FITMENT:

    1993-2016 Dodge Viper
    1991-2004 Dodge Dakota
    1997-2003 Dodge Durango

     

    SPECIFICATION:

    Spacer Thickness:1.25 inch or 32 mm

    Bolt Shack Length:32 mm

    Torqued Down By Hand At:75-85 FT/LBS

    Hub Bore:73.1 mm

    Number of Pieces: 2

     

    Position:
    Front+Rear+Left+Right

     

    NOTE:

    1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
    2. Measure the fender gap and stock bolt length to choose suitable thickness.(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
    3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
    4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
    5. Returns are only accepted if unused and not  installed.(returns are not accepted if spacers-adapters have been installed to your vehicle).

    ?

    What are Wheel Spacers?

    Also known as wheel adapters, wheel spacers are special components that help create extra wheel track width. They are fitted between the wheel hub assembly and the wheel itself to increase space. Every wheel gets displaced outward by a distance equal to the spacer’s thickness. 

     

    As aforementioned, the primary purpose of wheel spacers is to increase space between the hub assembly and the wheel. It usually is not appropriate for the wheel to be very close to other inner parts like the wheel well. It will lower the driving performance, especially when the tyre rubs against the suspension components when making turns.

     

    Wheel spacers are primarily used in vehicles with wider tyres during custom installation, where the tyres you are installing are larger than the tyres that came with the car. As a result, wheel spacers improve vehicle handling and provide better traction on the road.

     

    STEPS TO PROPERLY INSTALL WHEEL SPACERS:

    Step 1: Preparation

    Step 2: Loosen All Lug Nuts

    Step 3: Lift the Car

    Step 4: Remove the Wheel

    Step 5: Prepare the Wheel Hub

    Step 6: Install the Wheel Spacer

    Step 7: Torque the Matching Lug Nuts Tighten using the star pattern as shown below when following the numbers in order.

    Step 8: Remount the Wheel

    Step 9: Carefully Lower the Vehicle

    Step 10: Torque the Lug Nuts to Specification

    Step 11: Repeat Steps 1-10 for the Remaining Wheels

     

    Item Specifics
    Brand :luxfineparts
    Manufacturer Part Number :13361615
    Manufacturer Warranty :1 Year
    Type :Wheel Adapter
    Quantity :2pcs
    Thickness :1.25" or 32mm
    Interchange Part Number :For Dodge Durango, Dakota, Viper 6x4.5 models
    Surface Finish :CNC Machined Polished Aluminum Finish
    Material :High Quality t6 6061 Billet Aluminum
    Wheel Bolt Pattern :6x5.5" or 6x139.7mm
    Vehicle Bolt Pattern :6x4.5" or 6x114.3mm
    Thread Pitch :1/2"x20 or 1/2" UNF
    Color :Black
    Hub Center Bore :73.1mm
    Hubcentirc :No
    Stud Grade :10.9
    Surface Finish :CNC Machined Polished Aluminum Finish
    Package Gross Weight :8.91lb
    Lug Patterns :6 Lugs
    Torqued Down By Hand At :75-85 FT/LBS
    Bolt Shank Length :32mm
    Outer Diameter :175mm
    Note :NOT for original wheel, Only work with 6x5.5"(6x139.7mm) Wheel

    Payment

    Any payments that will be accpeted by eBay are all available.

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.


    2.USPS, UPS, FedEx shipping will be provided.


    3.We will provide you with a logistics tracking number.


    4.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you tell us the new address within 12 hours after payment.

    Returns

    30-day free return provided.

    Contact Us

    Any quesiton or problem, do contact us please.


    We are always online to answer.


    Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.

    About Us

    We are committed to the production and sales of high quality autoparts, if you cannot find what you need in our store, just contact us, we will find the right part for you.


    All rights reserved.