Taramps TS 1200x4 Car Audio Amplifier 1200W RMS 2 Ohms 4 Channels

Free Expedited 3-5 Day Fedex Delivery!!!

_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

The Taramps TS 1200X4 digital amplifier module was developed with the highest performance for a wide variety of car audio systems. It's a multi-channel stereo amplifier, with 4 channels of 300 watts RMS at 2 ohms, and allows bridge connection, with 2 channels of 600 watts RMS at 4 ohms, for a maximum power of 1200 watts RMS. The TS 1200X4 is full-range and can be used with a wide variety of speakers, drivers, and super tweeters.

A new feature of this product is the 4-channel individual wire input with automatic activation, compatible with original players and multimedia systems, eliminating the need for adapters and maintaining the originality of your car. Another highlight is the new power and output connector, which, in addition to being robust, ensures greater practicality and safety during installation.

It has an integrated crossover (HPF, LPF, full) that configures the amplifier's operating mode. Gain adjustment that allows for adjustment to the output signal levels of virtually all CD/DVD and MP3 players on the market. Indicator LED showing that the amplifier is on.

Due to its versatility, it can be installed to amplify speakers in car doors and rear decks, vans, pickups, SUVs, motorcycle advertising boxes, 2-way kits, 4-way kits, coaxial, triaxial, quadraxial, 4-inch, 5-inch, 6-inch, 6x9-inch, 5x7-inch speakers, trio boxes, bob boxes, residential boxes, among others.

All this and much more to improve your sound system, with the quality you deserve.

Technical specifications:

• Operating class: class d.

This indicates the amplifier's construction; class d (also called digital) due to the PWM (pulse width modulation) used in its operation, allows for a small, efficient amplifier with reduced heat generation compared to other construction classes.

• Number of channels: 4.

Number of channels for use in your project; with this specific model, you have the option of connecting with 4, 3, and 2 channels.

• Power @14.4v – 2 ohms stereo: 4 x 300w RMS.

The power at 14.4 volts is related to the vehicle/power supply operation.

• Power @14.4v – 4 ohms bridged: 2 x 600w RMS.

The power at 14.4 volts is related to the vehicle/power supply operation.

• Minimum stereo output impedance: 2 ohms.

Association with the final result of speakers, where, for example, we can connect two 4-ohm speakers per channel to achieve this result.

• Minimum bridged output impedance: 4 ohms.

Association with the final result of loudspeakers, where, for example, we can connect two 8-ohm speakers per channel (bridge) or just one 4-ohm speaker for this result.

• Minimum RCA input sensitivity: 4V (min.) / 250mV (max.).

Lowest voltage required for maximum performance with the amplifier, meaning that even with low radio volume, we can achieve good results.

• Minimum wire input sensitivity: >10V (min.) / 3V (max.).

Lowest voltage required for maximum performance with the amplifier, meaning that even with low radio volume, we can achieve good results.

• Frequency response: (full range): 8Hz to 25kHz (-3dB).

With the frequency response, it is possible to identify the application of the amplifier; if the loudspeaker or any other type of transducer you are using is within this response, it means that we can use this product in your project. • Fixed low-pass crossover (LPF): 90Hz.

LPF, or low-pass filter, means that everything below this reference frequency is reproduced, while anything above it is not used. A common use of this function is to reduce the presence of vocals in subwoofers.

• Fixed high-pass crossover (HPF): 90Hz.

HPF, or high-pass filter, means that everything above this reference frequency is reproduced. A common use of this function is to reduce the presence of bass in door speakers, for example.

• Supply voltage: 9 to 16V.

This indicates the amplifier's operating voltage, specifying the minimum and maximum voltage required for operation. Outside of this specification, it will not turn on or will activate a protection circuit.

• Standby current consumption: 0.9A.

This is the reference current consumption of the amplifier when it is on and without music playing.

• Maximum musical consumption: @14.4VDC: 55A.

This is the estimated consumption of the amplifier working at minimum impedance playing music at maximum volume.

• Maximum consumption with sinusoidal signal: 110A.

Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency, and stable power supply.

• Protection system: output short circuit.

This system exists to protect the amplifier's operation. It may be related to the output, when there are connections below the minimum impedance, a short circuit in the installation, or even speakers with problems.

•• Dimensions: width 13.8cm x height 4.8cm x depth 25cm.

Extreme dimensions of the product.

• Weight: 1.24 kg

Gross weight of the product.