Condition: REFURBISHED TO PERFECT WORKING CONDITION

Warranty: 90 DAY MANUFACTURER

What's in the Box?

• Amplifier
  
• Bass Remote
  
• Owner's Manual
  

Description:

Hifonics 35th Anniversary 4000 watt Super D-Class™ Brutus Elite mono subwoofer amplifier with electronic crossovers, bass equalization and bass remote included.

Hifonics offers Super A/B Class™ full range and Super D-Class™ mono subwoofer amplifiers to continue the 35th Anniversary celebration of Hifonics. The Brutus ELITE or “BE35” offers several 2 and 4 channel full range with several mono amps along with a killer 5 channel that utilizes both Super A/B Class™ and Super D-Class™ in the same amplifier – the best part is the 5th channel is 1 ohm stable, which is unheard of in five channel high performance amplifiers. The big bruiser in the line is the Brutus BE35 4000.1D delivering 4000 watts at 1ohm.

Features:

• Hifonics Elite products are not available for Internet sales
  
• Accu-Cross crossovers allow complete control of the signal direction to all speakers
  
• Ultra-Fi™ MOSFETs product high power with high efficiency for coolig and minimal distortion
  
• Tiffany style RCA connectors for audiophile signal quality with minimum distortion
  
• Illuminated molded ad angled output connectors
  
• Super D-Class mono blocks include bass remote
  
• Low Noise Preamplifier Circuitry
  
  • Low voltage signal from the source unit comes into the amplifier Preamplifier circuit with minimal distortion
    
• RCA Inputs
  
  • Tiffany style RCA connectors for audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection
    
• Operation Mode
  
  • Mono mode is intended for subwoofers only
    
• Crossover Type
  
  • Accu-Cross crossovers allow for complete control of the signal directing to all speakers. See specifications section for specific frequencies
    
• Electronic Equalizer
  
  • Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier
    
• Class / Topology
  
  • Super D-Class™ designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs
    
• Output Device Technology
  
  • The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
    
• Heat Sink
  
  • Heavy duty aluminum alloy heat-sink efficiently moves heat from the MOSFET where it can be cooled
    
• Power Supply
  
  • Hifonics T3 (Twin Turbo Toroids) power supply keeps voltage constant through the Ultra-Fi output devices
    
• Output Connections
  
  • Nickel-plated, high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
    
• Connection Type
  
  • Secure connection for all power, ground and speaker connections. Angled for ease of access during installation.
    
• Full-Range RCA Outputs for Signal Pass Through
  
  • One pair of Tiffany style connectors for a full range, L & R output allow distortion free signal to be passed through this amplifier to feed that signal to other components without the need for noise generating Y cables
    
• LED System Protection Circuitry Diagnostics
  
  • Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
    
• Bass Remote Included
  
  • Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle. Smooth potentiometer and ringed illumination in a satin black mount create a custom look
    
• Parametric / Signal Contouring
  
  • Parametric Bass EQ with adjustments: Boost 0 - 10dB Width (Narrow - Wide [on Center]) Center Frequency - 30Hz - 100Hz
    

Specifications:

• Class: Super D Class™
  
• Variable Voltage: 0.2V - 9V
  
• Signal to Noise: >95dB
  
• Frequency Response: 10Hz - 50KHz
  
• Crossover: Variable Electronic
  
• Variable Low Pass Crossover 12dB per Octave: 30Hz - 250Hz
  
• Tone Control/Parametric EQ: ParaQ Bass EQ
  
• Bass Boost: 0~10dB Variable Center Frequency and Wideth with ParaQ
  
• Subsonic Filter: 15Hz - 35Hz
  
• Phase Shift: 0-180 Degrees
  
• Power @ 1 Ohm: 1 x 4000 Watts
  
• Power @ 2 Ohms: 1 x 2000 Watts
  
• Power @ 4 Ohms: 1 x 1000 Watts
  
• Total Channels: Mono
  
• Audio Inputs: Yes
  
• Audio Outputs: Yes
  
• Power Terminal 12v/GND: 0 AWG
  
• Speaker Terminal Wire Gauge: 12 AWG
  
• Fusing: External
  
• Total Harmonic Distortion (THD): <0.10%
  
• Warranty: 1 Year
  

Product Dimensions:

• Product ONLY Weight (pounds): 17.2
  
• Product ONLY Weight (kilograms): 7.8
  
• Product Packaging Weight (pounds): 19.3
  
• Product Packaging Weight (kilograms): 8.75
  
• Product Packaging Dimensions (LxWxH) - Inches: 27.94 x 10.13 x 3.56
  
• Product Packaging Dimensions (LxWxH) - CM: 70.97 x 25.73 x 9.04

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 90 DAY

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.