What is this?
PCB terminals are widely used in almost all electronic equipment, especially in the circuit board or the PCB, the prototype and more. Acting as a connector role between power and signal.
What will I get?
The PCB Screw Terminals, we provide here, is in the size of: Insulation Voltage: AC300V; Rated Current: 15A; For Wire Gauge: AWG 22-14; Position: 2; Pitch: 5mm; Wiring Type: Press Spring Piece; Wiring Contact Material: Brass Tinned; Terminal Material: Brass Tinned; Shell Material: Plastic; Color: Blue; Terminal Length: 4mm; Body Size (Not Included Terminal): 10 x 7.6 x 10 mm / 0.39 x 0.3 x 0.39-inch(L*W*H)
In the package of: 10 x PCB Screw Terminals
Is there any advantages of the product?
GOOD MATERIAL - High conductivity brass tinned contacts terminal connectors with a durable moderate thickness plastic structure.
CAN BE SPLICED - Side of the each PCB connector is produced with the spliced slot, good for adding positions.
EASY FASTEN - With press spring piece type wiring hole, for use with screw to fasten, simple to hold the wire tightly.
How to use it?
Steps of installation: 1. Insert the pin to the board, then jointing to connect; 2. When wiring is needed, peel off your wire first; 3. Then Insert your wire into the hole; 4. Finally, fasten the screws to tightly hold.
What should I notice?
The wiring sequence should be confirmed in advance, or it is very easy to connect incorrectly.
PCB terminals are widely used in almost all electronic equipment, especially in the circuit board or the PCB, the prototype and more. Acting as a connector role between power and signal.
What will I get?
The PCB Screw Terminals, we provide here, is in the size of: Insulation Voltage: AC300V; Rated Current: 15A; For Wire Gauge: AWG 22-14; Position: 2; Pitch: 5mm; Wiring Type: Press Spring Piece; Wiring Contact Material: Brass Tinned; Terminal Material: Brass Tinned; Shell Material: Plastic; Color: Blue; Terminal Length: 4mm; Body Size (Not Included Terminal): 10 x 7.6 x 10 mm / 0.39 x 0.3 x 0.39-inch(L*W*H)
In the package of: 10 x PCB Screw Terminals
Is there any advantages of the product?
GOOD MATERIAL - High conductivity brass tinned contacts terminal connectors with a durable moderate thickness plastic structure.
CAN BE SPLICED - Side of the each PCB connector is produced with the spliced slot, good for adding positions.
EASY FASTEN - With press spring piece type wiring hole, for use with screw to fasten, simple to hold the wire tightly.
How to use it?
Steps of installation: 1. Insert the pin to the board, then jointing to connect; 2. When wiring is needed, peel off your wire first; 3. Then Insert your wire into the hole; 4. Finally, fasten the screws to tightly hold.
What should I notice?
The wiring sequence should be confirmed in advance, or it is very easy to connect incorrectly.