Specifications:
Voltage: 12V
Connector Gender:Female
Terminal Gender:Male
Connection: 3 pins
Terminal Type: Blade
Spark Plug Material: Iridium
Spark Plugs Part Number : 7098, 2262, ZFR5FGP
Ignition Coil Part Number: UF242,UF-242
18.5% more energy than regular coils
Interchange Part Number:
1788303, UF242, 5C1013, 50063, C1221, C242
GN10168, 30520P8EA01, 30520P8FA01, 30520RCAA02
Replacement Part Number:
GN10168, C1221, C242, UF242, 5C1013, 1788303, 50063,
30520P8EA01,30520P8FA01,30520RCAA02
Feature :
*Function
The ignition coil acts like a transformer, turning a voltage of 12 volts into a voltage of 30, 000 volts, which the car needs such kind of voltage to run normally.
*High performance
Equipped with high-quality conductive copper wire to improve coil performance for our customers,All of our ignition coils use copper windings inside, which allows for better connectivity
*Low fuel consumption
the ignition coil can reduce fuel consumption to provide the best realiability and durability.
- 【Car Condition Self-inspection】:If your car starts to experience high-frequency start difficulties, stalling, idling, increased fuel consumption, etc., you should check your engine light (CEL) and VSC warning light in time, and replace the ignition coil/spark plug in time to better protect your car.
- 【Premium Quality of Ignition Coil Pack】：Adopting advanced technology to create high-temperature and impact resistant ignition coil, paired with trivalent metal plated spark plugs to provide superior.
- 【Boost Power by 15%】:Equipped with 0.6mm ultra-fine iridium electrode spark plug, the coil is made of high conductivity copper wire, high temperature silicone, high insulation epoxy resin and high density sleeve, stronger and safer.
- [Iridium Spark Plugs]: Nickel-plated shell + aluminum-ceramic, with better corrosion resistance and heat resistance, ribbed insulation design can effectively prevent misfire caused by flashover.
- [Longer Service Life]: The coil is made of high-quality copper wire, high-temperature resistant silicone and imported high-density sleeve, with good electrical conductivity, heat and corrosion resistance, and
Specification
Voltage: 12V
Connector Gender:Female
Terminal Gender:Male
Connection: 3 pins
Terminal Type: Blade
Fitment:
For Acura CL V6 3.2L 2001-2003
For Acura EL L4 1.7L 2002-2005
For Acura MDX V6 3.5L 2001-2005
For Acura MDX V6 3.7L 2007-2009
For Acura RL V6 3.5L 2005-2008
For Acura RL V6 3.7L 2009-2011
For Acura TL V6 3.2L 1999-2008
For Acura TL V6 3.5L 2007-2008
For Honda Accord V6 3.0L 2000-2007
For Honda Civic L4 1.7L 2001-2005
For Honda Odyssey V6 3.5L 1999-2010
For Honda Pilot V6 3.5L 2003-2008
For Honda Ridgeline V6 3.5L 2006-2008
For Saturn Vue V6 3.5L 2004-2007
Installation Steps:
1.Disconnect the negative electrode of the battery and loosen the high voltage wire.
2.Disconnect the wiring harness connector , remove the bolt and nut fixing the ignition coil.
3.Hold the root of the ignition coil rubber sleeve and pull out the ignition coil from the spark plug.
Install the new ignition coil, restore it to the original state, and check if the ignition is successful.
Note:It recommend that you replace ignition coils and spark plug at the same time to reduce possibility of engine misfires,rough idle,poor fuel economy,difficulty starting the engine.
