H7 Warm Tips:
Warm Tips:
here may be multiple models of bulbs in the same year, Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.
here may be multiple models of bulbs in the same year, Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.
Specifications:
- Bulb Socket: H7 + H11
- Type: 3570 CSP Chips
- Wattage: 55W/Per Bulb
- Working Voltage: 12-24V
- Waterproof Rate: IP67
- Installation: PLUG-N-PLAY
- Color Temperature: 6500K (Cold White)
- Luminous Flux: 20,000LM/Pair
- Life Span: Up to 50,000 Hours
- Operating Temperature: -35℃ to +55℃
- Cooling Method: Upgrade exposed curved copper sheet + High Speed Cooling System + Forced Cooling
- Beam Type: Headlight (High Beam & Low Beam Combo)
- Wattage: 55W/Per Bulb
- Working Voltage: 12-24V
- Waterproof Rate: IP67
- Installation: PLUG-N-PLAY
- Color Temperature: 6500K (Cold White)
- Luminous Flux: 20,000LM/Pair
- Life Span: Up to 50,000 Hours
- Operating Temperature: -35℃ to +55℃
- Cooling Method: Upgrade exposed curved copper sheet + High Speed Cooling System + Forced Cooling
- Beam Type: Headlight (High Beam & Low Beam Combo)
- Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
- The model is the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
- Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
NOTE: Some need add bulb holder to get (NOT Include)
Note !!! This lisiting do not included bulb holders!!
Note !!! This lisiting do not included bulb holders!!
Package Included:
2pcs H7 Headlight Bulbs
2pcs H11 Headlight Bulbs
2pcs H7 Headlight Bulbs
2pcs H11 Headlight Bulbs
(Random delivery of new and old packaging in the box)
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Contact Us:
◆Thank you for purchasing our product!
◆Dear customer, if you have any inquiries, quality problems or inappropriate or other problems about our products, please do not open a return dispute or return application or neutral / bad evaluation directly, contact us through eBay information, we will give you a satisfactory solution .
◆We try to reply to your email within 24 hours, but due to the large volume of emails received every day and different time zones, we may not be able to respond to your email immediately. Hope your understanding, thank you.