• Package includes:
  • 4 Pack Axle Straps Car Trailer Hauler Ratchet Tie Down Straps
  •  
  • Item Details
  • 100% Brand New
  •  
  • How to Use a Winch
  • Off-road driving with your vehicle can be exhilarating, but sometimes you might find yourself stuck on some rocks or in a pit of mud. Fortunately, if you have a winch mounted on your vehicle, you shouldn’t have any problem getting yourself unstuck. To use your winch properly, you’ll need to locate a sturdy anchor to attach it to. Once your winch is rigged, you can slowly pull your vehicle out from whatever it’s stuck in.

    • 2" X 24" Axle Straps Car Trailer Hauler Ratchet Tie Down Straps with Snap Hooks

    Package includes:

    4 Pack Axle Straps Car Trailer Hauler Ratchet Tie Down Straps

     

    Item Details

    100% Brand New

     

    How to Use a Winch

    Off-road driving with your vehicle can be exhilarating, but sometimes you might find yourself stuck on some rocks or in a pit of mud. Fortunately, if you have a winch mounted on your vehicle, you shouldn’t have any problem getting yourself unstuck. To use your winch properly, you’ll need to locate a sturdy anchor to attach it to. Once your winch is rigged, you can slowly pull your vehicle out from whatever it’s stuck in.

    1
    Plug the winch remote control into the winch. Your winch should have come with a remote control attached to a long cord. Look for the plug at the end of the cord and attach it to the corresponding receptacle on the outside of the winch. Run the remote control cord from the winch to the driver’s seat and place the remote control in your vehicle
    2
    Put on a pair of thick gloves. Never handle a winch cable without gloves on. The cable could cut your hands.
    3
    Find something in front of your car to anchor your winch to. A large tree trunk, boulder, or other vehicle is ideal. Don’t anchor your winch to something small and weak or you risk breaking it. Try to find an anchor that’s straight in front of your vehicle.
    4
    Use the disengage lever to release the winch cable. The disengage lever should be located on the outside of the winch. The lever should have an option that says “free spool” or “disengaged.” Turn the lever to that option. This will release the cable so you’re able to manually pull it out from the winch.
    5
    Pull the winch cable all the way to the anchor. Don't pull too much of the cable out or you'll create unnecessary slack. Set the end of the cable down next to the anchor.
    If the winch cable doesn't reach the anchor, look for another anchor that's closer to your vehicle.
    6
    Wrap a tree trunk protector around the bottom of the anchor. A tree trunk protector is a thick nylon strap with two loops, one on each end. Wrap the protector around the anchor so the two end loops are facing you. Hold the two end loops in your hand.
    If your winch didn’t come with a tree trunk protector, you can order one online or find one at your local hardware store.
    7
    Hook a D-shackle through the 2 loops on the protector. A D-shackle is a curved shackle with a large pin that screws in and out of the shackle. Remove the pin from the D-shackle and put the curved part of the D-shackle through both of the loops on the tree trunk protector. Once the loops are on the shackle, reinsert the pin and twist it to tighten it into place.
    8
    Hook the winch hook to the D-shackle with the tip facing up. The winch hook is the hook at the end of the winch cable.
    9
    Turn the disengage lever back to “engaged.” You want the lever to be back in the position it started in before you released the winch cable. This will prevent more cable from coming out of the winch.
    10
    Use the winch remote to slowly pull the winch cable taut. Press the button on the remote control to start pulling the winch cable back into the winch. This will cause the winch cable to tighten. Stop pressing the button when the cable is taut.

    Then  Pulling Your Vehicle Out.


    Item Specifics
    Brand auspartshouse
    Features Durable
    Package Type Box
    Ratcheting Tie Down Straps Size 2" X 8'
    Axle Straps 2" X 24"
    Items Included 1 Switch
    Terminal Gender Male
    Connect Gender Female
    Color As show
    Manufacturer Warranty 1 Year
    Manufacturer Part Number 12249979
    Custom Bundle No
    Modified Item No
    Housing Material Plastic
    Quantity 4

    Payment
    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Any payment which can be accepted by ebay.
     
    If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping

    1. More than 90% orders processed within 24 hours of payment verification.

    2. We only ship to the address in order provided to us. Your order address will be the shipping address.

    3. The images shown is the the actual item you will get and the size are for your reference.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    Feedback

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Contact Us

    Any question or problem, please feel free to contact us via ebay message.

    Just Get It NOW
    content_src_url
    Shop Category
     Store Home
     Wheel Spacers
     Leveling Lift Kits
     3RD Brake Lights
     LED Instrument Lights
     Tire Pressure Sensors
     Fasteners
     Remote Keys
     Sun Visors
     Roof Racks
     Ballast Modules
     Rubber Seal Strips
     Throttle Body
     Thermostat Housing
     Fuel Injectors
     Coilovers
     Ignition Coils
     Wheel Hub Bearing
     Suspension Kits
     Window Regulators
     Sensors
     Mud Flaps
     Lift Supports
     Resistors
     HVAC Blower Motors
     Radiators
     Cooling Fans
     Coolant Overflow Tanks
     Engine Gaskets
     Blend Door Actuators
     Air Suspensions
     AC Condensers
     Heater Cores
     Window Switches
     Door Handles
     Shock Struts
     Windshield Wiper Motors
     A/C Compressors
     Timing Chain Kits
     Timing Belt Kits
     Turbochargers
     Radiator Supports
     Mirrors
     A/C Evaporators
     Engine Motor Mounts
     Starters
     Alternators
     Brake Calipers
     Power Steering Pumps
     Tensioners
     Brake Rotors
     Brake Pads
     Fuel Pumps
     Water Pumps
     Driveshafts
     Idle Air Control Valves
     Power Steering Rack & Pinion
     VVT Variable Valves
     Lug Nuts
     Steering Shafts
     CV Axles
     Hydraulic Lifters
     Towing Parts
     Steering U-Joint Parts
     Door Lock Actuator
     AC Compressor-d
     Spoilers & Wings
     Truck Bed Accessories
     Lawn Mower Parts
     Oil Pump
     Bumper
     Armrest Cover
     Horn
     Truck Bed Mat
     Side Steps Running Boards
     Cylinder Piston Gasket
     Bug Hood Shield
     Running Board Motor
     Bed Step
     Mass Air Flow Sensor
     Dipstick
     Headlights Assembly
     Harmonic Balancer
     Hub Cap
     Tire Chain
     Sway Bar Bushing Kit
     Wheel Hub Bearing Knuckle
     Cargo Cover
     Spark Plug
     Strut Mount
     Coil Spring
     Differential Assembly
     Radiator Shutter
     CV Axle Boot Kits
     Other
    Hot Item
    New List Item
    2" X 24" Axle Straps Car Trailer Hauler Ratchet Tie Down Straps with Snap Hooks

    Package includes:

    4 Pack Axle Straps Car Trailer Hauler Ratchet Tie Down Straps

     

    Item Details

    100% Brand New

     

    How to Use a Winch

    Off-road driving with your vehicle can be exhilarating, but sometimes you might find yourself stuck on some rocks or in a pit of mud. Fortunately, if you have a winch mounted on your vehicle, you shouldn’t have any problem getting yourself unstuck. To use your winch properly, you’ll need to locate a sturdy anchor to attach it to. Once your winch is rigged, you can slowly pull your vehicle out from whatever it’s stuck in.

    1
    Plug the winch remote control into the winch. Your winch should have come with a remote control attached to a long cord. Look for the plug at the end of the cord and attach it to the corresponding receptacle on the outside of the winch. Run the remote control cord from the winch to the driver’s seat and place the remote control in your vehicle
    2
    Put on a pair of thick gloves. Never handle a winch cable without gloves on. The cable could cut your hands.
    3
    Find something in front of your car to anchor your winch to. A large tree trunk, boulder, or other vehicle is ideal. Don’t anchor your winch to something small and weak or you risk breaking it. Try to find an anchor that’s straight in front of your vehicle.
    4
    Use the disengage lever to release the winch cable. The disengage lever should be located on the outside of the winch. The lever should have an option that says “free spool” or “disengaged.” Turn the lever to that option. This will release the cable so you’re able to manually pull it out from the winch.
    5
    Pull the winch cable all the way to the anchor. Don't pull too much of the cable out or you'll create unnecessary slack. Set the end of the cable down next to the anchor.
    If the winch cable doesn't reach the anchor, look for another anchor that's closer to your vehicle.
    6
    Wrap a tree trunk protector around the bottom of the anchor. A tree trunk protector is a thick nylon strap with two loops, one on each end. Wrap the protector around the anchor so the two end loops are facing you. Hold the two end loops in your hand.
    If your winch didn’t come with a tree trunk protector, you can order one online or find one at your local hardware store.
    7
    Hook a D-shackle through the 2 loops on the protector. A D-shackle is a curved shackle with a large pin that screws in and out of the shackle. Remove the pin from the D-shackle and put the curved part of the D-shackle through both of the loops on the tree trunk protector. Once the loops are on the shackle, reinsert the pin and twist it to tighten it into place.
    8
    Hook the winch hook to the D-shackle with the tip facing up. The winch hook is the hook at the end of the winch cable.
    9
    Turn the disengage lever back to “engaged.” You want the lever to be back in the position it started in before you released the winch cable. This will prevent more cable from coming out of the winch.
    10
    Use the winch remote to slowly pull the winch cable taut. Press the button on the remote control to start pulling the winch cable back into the winch. This will cause the winch cable to tighten. Stop pressing the button when the cable is taut.

    Then  Pulling Your Vehicle Out.

    Item Specifics
    Brand :auspartshouse
    Features :Durable
    Package Type :Box
    Ratcheting Tie Down Straps Size :2" X 8'
    Axle Straps :2" X 24"
    Items Included :1 Switch
    Terminal Gender :Male
    Connect Gender :Female
    Color :As show
    Manufacturer Warranty :1 Year
    Manufacturer Part Number :12249979
    Custom Bundle :No
    Modified Item :No
    Housing Material :Plastic
    Quantity :4


    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Any payment which can be accepted by ebay.
     
    If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.

    1. More than 90% orders processed within 24 hours of payment verification.

    2. We only ship to the address in order provided to us. Your order address will be the shipping address.

    3. The images shown is the the actual item you will get and the size are for your reference.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Any question or problem, please feel free to contact us via ebay message.


    All rights reserved.