LED Ceiling Fan Light 18 watts
Outside Diameter: 13cm/5.12inch
Lumen: 2100LM FOR 18-20 Square Meter ROOM
Driver : Input AC120V 50/60Hz
Light temperature :5CCT - 3000K 3500K 4000K 5000K 6000K
Control by Triac Dimming switch for dimming or a conventional switch for turn on and off .
Packing
1x led ceiling fan light retrofit panel with driver on the panel.
3x Magnets
2x 25cm wires
1x Wire Connector
1x User Manual
Easy Installation
Step1. Cut off the power supply.
Step2. Remove the light source and BALLAST(Our LED fan light retrofit panel has driver on the board and just connect 120V AC directly , no extra external AC and DC driver needed ).
Step3. Choose one method suitable for your fixture.(with magnets or screws)
Step4. Connect wires with wire connector,positive to positive and negative to negative.
Here's how to confirm if you can use this led ceiling fan light retrofit light kit .
1. take off the light cover and measure the light base to make sure the light base plate's outside diameter is larger than the 5.12inch .
2 .check if the original light base plate is iron or can you use screws to fasten the light retrofit kit .