Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR MANUFACTURER

Package Includes:

• (1) KICKER 48CWRT104 CompRT 800w Shallow 10" Subwoofer DVC 4-ohm Car Sub COMPRT10
• (1) SSV Works 240-MAVR-US10U Under-Seat 10" Subwoofer Enclosure for Maverick R
• (1) Rockville RWK8ATV OFC Copper 8 AWG Gauge Amp Installation Wire Kit 4 RZR/ATV/UTV
• (1) Rockville ATV300 Mono UTV/Motorcycle/ATV Amplifier IP65 Micro Powersport Amp

---

Description:

The CompRT line of ultra-thin subwoofers fits under your seat or behind your back bench with ease. Now even more efficient and sporting a slick, blacked-out cone, the CompRT® gives you all the bass in very little space!

10" CompRT 4 Ohm
The CompRT 10-inch Subwoofer is an all-weather thin subwoofer with a pair of 4-Ohm voice coils. With a mounting depth under four inches and plenty of power handling, this go-anywhere sub is as flexible as it is powerful. A UV-resistant cone and surround help make the CompRT sound great wherever the road (or trail) takes you.

It takes serious know-how for a thin subwoofer to deliver super-deep bass. Our signature red double stitching makes an outstanding bond between the improved Santoprene surround and polypropylene woofer cone. With our custom SoloKon™ technology and the CompRT’s unique framework, the sub sounds fat – but keeps it thin! To make our subs even more reliable, KICKER engineers developed Forced-Air Cooling™ to help our subs run 20 percent cooler than before.

The CompRT 10-inch Subwoofer works best with a sealed enclosure and 400 watts of recommended power. See below for more details.

Specifications:

• SIZE [in, cm]: 10, 25
• IMPEDANCE [Ohms]: 4 DVC
• Recommended Amplifier Power (watts RMS): 400
• Peak Power (watts, per ANSI/CTA-2031-A): 800
• SENSITIVITY [dB 1w/1m]: 84.8
• MOUNTING DEPTH [in, cm]: 3-7/16, 8.8
• MOUNTING DIAMETER [in, cm]: 9-1/8, 23.1
• MIN SEALED BOX VOL [cu. ft, L]: 0.4, 11.3
• MAX SEALED BOX VOL [cu. ft, L]: 1.25, 35 .4
• MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4
• MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6

---

Description:

We are proud to uphold our first to market, and have been the company setting the off-road audio standard since 2016. With that said, we have another industry first by having the first aftermarket subwoofer enclosure readily available that allows a full size 10" subwoofer! That's right, you do not have to use a shallow 10" subwoofer with our enclosure!

Fitting a shallow-mount 10" subwoofer, unlike other enclosures on the market that only fit the upper seat position, you can still position your seat in either the upper or lower seat configuration! This enclosure is designed to fit under both the driver and passenger side of the Maverick R, offering flexibility in installation. Users can choose their preferred side or even set up a dual-sub configuration.

Hassle-Free Installation, this subwoofer enclosure uses factory mounting locations, eliminating the need of any modifications, making install a breeze.

This subwoofer enclosure is compatible with PRP's lowering bracket for the the Maverick R.

Features:

• SSV Works is the first company to integrate audio in side-by-sides, we have pioneered all the great features you find in audio-systems today. From plug-&-play kit solutions, true weatherproof ratings, to factory fit and finishes, SSV has set the standard in UTV audio from the very beginning!
• F3™ - The Original Factory Fit & Finish: Each Maverick R Kit looks just the way it should, like it came straight from the factory. Purpose built, our enclosures match the factory styling and fits with seamless precision.
• Premium Quality: Our product is meticulously crafted with high-strength materials, epitomizing premium quality and durability. These are not cheaply hand-built and coated with bed-liner like the other enclosures on the market
• To ensure a perfect fit, please refer to our COMPATIBILITY tab before making your purchase decision.
• Trail Ready: Built specifically for the off-road environment, SSV Works’ components withstand all the harsh riding conditions. Sand, dust, water or snow, you can ride your favorite trials without sacrificing premium audio
• Weatherproof: Our product is engineered with weatherproof properties, ensuring resilience against the elements while standing firm against the damaging effects of UV rays, promising lasting quality and reliability.

Specifications:

• Max Sub Mounting Depth: 99mm
• Factory Mounting: Yes
• Speaker Size: 10inch

Options:

• Enclosure Only
• Airspace: .412cu ft
• UV Resistant: Yes
• Mounting Hardware: Included

Included:

• Sub Enclosure

---

How To Install An Amplifier in Your UTV:

Video of RWK8ATV:

Features:

• Rockville RWK8ATV 8 AWG Gauge Amplifier/Amp Installation Wire Kit For Motorcycle/RZR/ATV/UTV
• 6 Foot 8 Gauge 100% OFC, Red Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 6 Foot 8 Gauge 100% OFC, Black Flexible Ground Cable
• (2) 4 Foot 16 Gauge 100% OFC black Flexible Speaker Cables Protected by black nylon mesh
• 6 Foot Pre-terminated ring terminals make connections to the battery simple
• 6 Foot 18 Gauge Pre-Terminated REM Wire
• (1) Silver AGU Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• (1) 60A AGU Fuse
• (2) Ring Terminals
• (2) Spade Terminals
• (4) Speaker Cable Terminals
• (4) Washers
• (10) White Cable Ties
• (1) Hexagon Spanner

---

All About Your ATV300:

How To Set Up Your ATV300:

Inputs, Wires, and Controls on Your ATV300:

How To Connect a Headunit To Your ATV300:

Description:

The Rockville ATV300 is a mono amplifier for your motorcycle, UTV, ATV, or other powersport application. It will deliver 300w RMS @ 2 ohms. We dyno-test the amp to make sure you get the power we promise. This amp is specifically designed to power a subwoofer or 2.

This amp is IP65 which means even if you submerged it in water for a few seconds it would still function fine. This means that you do not need to worry about your amp breaking when you spray down your vehicle.

This amp is super compact making it easy to install into tight spaces.

If you want a waterproof and high performing powersport amplifier to power a subwoofer or 2 that will last for many years then this is a great option for you.

Features:

• Rockville ATV300 Mono UTV/Motorcycle/ATV Amplifier
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
• 2 Ohms: 300 Watts
• 4 Ohms: 160 Watts
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
• Peak 2 Ohms: 1200 Watts
• IP65 waterproof rating
• This is one of the only amps on the market that is IP65. That means even if you submerged it for a couple of seconds it would work fine
• All inputs and wire wiring is sealed and covered
• Conformal coated circuit board
• Anti rust materials
• Micro Size amplifier can easily fit in tight spaces
• Digital Class D Audio Topology
• Distortion(THD): =0.5%
• Full Range/Low Pass/High Pass Configurable
• High Input (Speaker level Input)
• Low Pass Filter: 32Hz-320Hz
• Subsonic High Pass Filter: 20Hz-60Hz
• Status Mode LED Indicator
• Waterproof sheath RCA Input
• High-Speed MOSFET Power supply
• Frequency Response: 20Hz-22KHz
• Signal to Noise Ratio: (1 Watt into 4 Ohms) =80dB
• Low Input Sensitivity: 0.2V-6V
• Speaker/High level Input Sensitivity: 0.5V-15.5V
• Fuse Rating: 35A
• Dimensions (Inches): 8.66” L x 3.74” W x 1.73” H

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.