• Fitment: 1990-1993 Acura Integra 1988-1991 Honda Civic 1988-1991 Honda CRX 1988-1991 Honda Prelude  
  • Position: Front+Left+Right+Lower  
  • Package Included: 2x Front Lower Ball Joint 2x Front Sway Bar End Link
  •  
  • Replacement Guideline
  • Ball joints
  • 2x Lower Ball Joint & 2x Stabilizer Bar Link Kit For 1988-1991 Honda Civic FWD

    Fitment:
    1990-1993 Acura Integra
    1988-1991 Honda Civic
    1988-1991 Honda CRX
    1988-1991 Honda Prelude

     

    Position:
    Front+Left+Right+Lower

     

    Package Included:
    2x Front Lower Ball Joint
    2x Front Sway Bar End Link

     

    Replacement Guideline

    Ball joints

    1. Purchase the correct replacement ball joint assembly for your vehicle.
    2. Remove the wheel and access the ball joint.
    3. Soak all the bolts with WD-40 or PB Blaster.
    4. Pull the cotter pin and loosen the large castellated nut.
    5. Pop loose the ball joint. 
    6. Remove the allen bolts and slide the control arm free. 
    7. Guide the new joint through the knuckle hole.
    8. Bolt the joint into place using the hardware included.
    9. Torque the bolts to the proper specifications.
    10. Screw in the new grease fitting and pump grease into the assembly.

     

    Sway bars

    1. To hold the stud on the end of the sway bar link while adding the new lock nut. 
    2. Using the wrench, install the new lock nut, making sure to wrench it the whole way.
    3. With the sway bar link in position, put the nut on using your hand. 
    4. Wrench the nut tight to the vehicle manufacturer recommended torque values
    5. Changing wrenches as needed to fit the new sway bar link nut.

     

    Signs of a ball joint breaks

    • Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle
    • Steering-The steering sloppy or stiff 
    • Tires -Uneven tire wear 

    Signs of sway bars breaks

    • Rattling and thumping noises on rough roads.
    • Imprecise vehicle handling.
    • Stronger inclination of the vehicle during cornering.

     

    Infiuence of a bad joint break

    • Causing mysterious clunking noise or drifting steering
    • Affecting your steering and suspension seriously 

     

    Infiuence of a bad sway bars

    • Without the sway bar, the car will not handle and corner as well, or as comfortably for the driver and passengers

     

     

    Note

    • Please be sure you review the compatibility information.
    • If you have a question about the part please free contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution.

    Item Specifics
    Brand auspartshouse
    Manufacturer Part Number 13368211
    Manufacturer Warranty 1 Year
    Placement on Vehicle Front Left Right Lower
    Type Control Arm Kit
    Material Alloy Steel
    OE/OEM Part Number K9385,K90123
    Interchange Part Number K9385
    Superseded Part Number Front Driver and Passenger Side Replacement
    Items Included Mounting Hardware
    Performance Part No
    Universal Fitment No
    Vintage Car Part No
    Features Greasable
    Adjustable Yes
    Quantity 4Pcs

    Payment:
    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Any payment which can be accepted by ebay.
     
    If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping:

    2. We only ship to the address in order provided to us. Your order address will be the shipping address.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns:

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    Feedback:

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Contact Us:

    Any question or problem, please feel free to contact us via ebay message.

    Shop Category

    2x Lower Ball Joint & 2x Stabilizer Bar Link Kit For 1988-1991 Honda Civic FWD

    Fitment:
    1990-1993 Acura Integra
    1988-1991 Honda Civic
    1988-1991 Honda CRX
    1988-1991 Honda Prelude

     

    Position:
    Front+Left+Right+Lower

     

    Package Included:
    2x Front Lower Ball Joint
    2x Front Sway Bar End Link

     

    Replacement Guideline

    Ball joints

    1. Purchase the correct replacement ball joint assembly for your vehicle.
    2. Remove the wheel and access the ball joint.
    3. Soak all the bolts with WD-40 or PB Blaster.
    4. Pull the cotter pin and loosen the large castellated nut.
    5. Pop loose the ball joint. 
    6. Remove the allen bolts and slide the control arm free. 
    7. Guide the new joint through the knuckle hole.
    8. Bolt the joint into place using the hardware included.
    9. Torque the bolts to the proper specifications.
    10. Screw in the new grease fitting and pump grease into the assembly.

     

    Sway bars

    1. To hold the stud on the end of the sway bar link while adding the new lock nut. 
    2. Using the wrench, install the new lock nut, making sure to wrench it the whole way.
    3. With the sway bar link in position, put the nut on using your hand. 
    4. Wrench the nut tight to the vehicle manufacturer recommended torque values
    5. Changing wrenches as needed to fit the new sway bar link nut.

     

    Signs of a ball joint breaks

    • Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle
    • Steering-The steering sloppy or stiff 
    • Tires -Uneven tire wear 

    Signs of sway bars breaks

    • Rattling and thumping noises on rough roads.
    • Imprecise vehicle handling.
    • Stronger inclination of the vehicle during cornering.

     

    Infiuence of a bad joint break

    • Causing mysterious clunking noise or drifting steering
    • Affecting your steering and suspension seriously 

     

    Infiuence of a bad sway bars

    • Without the sway bar, the car will not handle and corner as well, or as comfortably for the driver and passengers

     

     

    Note

    • Please be sure you review the compatibility information.
    • If you have a question about the part please free contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution.
    Item Specifics:
    Brand :auspartshouse
    Manufacturer Part Number :13368211
    Manufacturer Warranty :1 Year
    Placement on Vehicle :Front Left Right Lower
    Type :Control Arm Kit
    Material :Alloy Steel
    OE/OEM Part Number :K9385,K90123
    Interchange Part Number :K9385
    Superseded Part Number :Front Driver and Passenger Side Replacement
    Items Included :Mounting Hardware
    Performance Part :No
    Universal Fitment :No
    Vintage Car Part :No
    Features :Greasable
    Adjustable :Yes
    Quantity :4Pcs

    Payment:
    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Any payment which can be accepted by ebay.
     
    If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping:

    2. We only ship to the address in order provided to us. Your order address will be the shipping address.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns:

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    Feedback:

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Contact Us:

    Any question or problem, please feel free to contact us via ebay message.


    All rights reserved.