💡 Pro tip: First three levels (Step, Rise, Ascend) = perfect for tabletop gaming. Last three (Exalt, Dominate, Reign) = exhibition and competition plinths.

📏 Technical drawings: Every size includes precise measurements so you know exactly what you're getting. Compatible with standard gaming bases from all major systems.

🏆 Competition Painter

"I paint my Space Marine Captain on a standard 32mm base. When it's time for Golden Demon, I place that base on a Reign (82mm) extender – instant exhibition plinth. After the competition? Back to the 32mm for gaming. Same model, two lives."

⚔️ Tabletop Gamer

"My warlord needs to stand out on the battlefield. Rise (15mm) gives just enough elevation without making the model unstable. Opponents can instantly spot my commander across the table."

🎨 Display Cabinet Collector

"I have three tiers in my Detolf. Using Step (9mm), Ascend (22mm), and Exalt (42mm) creates visual depth. Each shelf tells a different story – from rank-and-file troops to legendary heroes."

🖌️ Commission Painter

"I deliver models on Dominate (62mm) plinths for photography. The client gets stunning portfolio shots, then can remove the model for actual play. It's a premium touch that justifies higher rates."

✅ We're Honest About FDM

These aren't resin-smooth. You'll see layer lines. But that's exactly what makes them perfect for customization. Most painters prime, fill, sand, or add texture anyway. The FDM texture gives primers excellent grip and accepts vegetation, scatter, and basing materials beautifully.

🧠 Pro tip: The seam line on round/oval bases? Rotate it to the back. Or sand it smooth in 30 seconds with fine grit paper. Some painters deliberately position it as a "front edge" detail after priming.

Every Hero Base has a 3mm gap underneath – perfect for 3mm disc magnets. By default, this space is covered with easy-remove supports, giving you a smooth bottom surface.

🚗 Why magnets? Transport safety. Your £200 centerpiece won't slide around in the car on the way to the tournament. Magnetic foam trays keep everything locked down.

The beauty of OBS: Your miniature can live on a standard base for gaming, then "step up" onto a Hero Base for display. Swap between battlefield and exhibition anytime.

✅ You're a competitive painter

You need proper exhibition plinths without spending £30+ per custom base.

✅ You run a gaming table

Your heroes, warlords, and commanders need to be visible in the chaos of battle.

✅ You collect and display

Your Detolf deserves better than flat models. Create visual hierarchy on every shelf.

✅ You're a commission painter

Deliver models on pro-level plinths. Photography looks 10x better. Charge accordingly.

✅ You want modular display options

Same model, multiple presentations. Gaming today, exhibition tomorrow. No permanent commitment.

🇬🇧 UK Based Creative Brand

We're hobbyists first, sellers second. We design products we actually use on our own painting desks and gaming tables.

🎨 Artist-Friendly Approach

No marketing nonsense. Honest specs. Real use cases. We tell you about the layer lines because we respect your intelligence.

📦 Fast UK Dispatch

Order today, we print and ship fast. No waiting weeks for overseas shipping. Supporting local makes a difference.

🔧 Expanding System

192 sizes now. More coming. We listen to the community. Need a specific size? Let us know. We're building this together.

📦 What You Get

• One Hero Base Display Extender in your chosen size and height
• Smooth bottom surface with removable supports
• 3mm magnet gap (optional use – supports remove easily)
• Technical drawing reference for exact dimensions
• Part of the Open Basing System (OBS) – fully compatible

🎨 Finishing Tips

• Prime it: Any hobby primer works perfectly. Layer lines become nearly invisible.
• Sand it: 30 seconds with 180-220 grit paper smooths any rough spots or the seam line.
• Fill it: Vallejo Plastic Putty or Tamiya Basic Type fills layer gaps if desired.
• Texture it: PVA glue + sand, Vallejo texture pastes, or cork – all stick brilliantly to FDM surface.
• Paint it: Acrylics, enamels, oils – treat it like any plastic base.

🧲 Magnet Installation (If Desired)

1. Use a sharp hobby knife to remove the small support piece underneath
2. You'll reveal a clean 3mm circular gap
3. Drop in a 3mm x 1mm or 3mm x 2mm neodymium disc magnet
4. Secure with superglue (cyanoacrylate works best)
5. Done – your base is now transport-safe and magnetic-tray compatible

⚠️ Important Note About FDM Printing

FDM (Fused Deposition Modeling) means visible layer lines. This is NOT a defect – it's the nature of the technology. If you need injection-molded smooth surfaces, these aren't for you. But if you're a painter who primes and finishes bases anyway (which is 99% of hobbyists), FDM is perfect. The texture actually helps paint adhesion.

🎯 Match Your Existing Base

Hero Bases are designed to hold your current gaming base. Check what your miniature is mounted on:

• Space Marine? Usually 32mm round → get 32mm round Hero Base
• Primaris Lieutenant? Usually 40mm round → get 40mm round Hero Base
• Cavalry model? Check if 75x42mm oval, 90x52mm oval, 60x30mm rectangle etc.
• Old Fantasy infantry? Probably 20mm or 25mm square

💡 Your figurine's base sits ON TOP of the Hero Base. They stack perfectly.

📏 Height Selection Guide

The verdict: Traditional plinths are beautiful but expensive and permanent. Hero Bases give you the same elevation and display presence while keeping your options open. Same miniature can be gaming piece Monday, exhibition centerpiece Saturday.

Can I use this for actual gaming?

Absolutely. Lower heights (Step, Rise, Ascend) are perfect for tabletop play. The wider footprint actually makes models MORE stable. Higher levels (Exalt, Dominate, Reign) are better suited for display and photography, but technically game-legal if you're not playing competitively.

Will the layer lines be visible after priming?

Slightly, but barely. One coat of Citadel or Vallejo primer hides 80-90% of layer texture. If you want glass-smooth: prime → light sand with 220 grit → prime again. Takes 2 minutes total. Most painters don't bother – the texture helps paint adhesion and adds subtle character.

Do I need to glue my miniature to the Hero Base?

No! That's the whole point. Your mini stays on its standard gaming base. That base simply SITS on top of the Hero Base. Want to game? Remove it. Want to display? Put it back. Zero commitment. (Though you CAN glue permanently if you want a dedicated display piece.)

What about the seam line on round bases?

Three solutions: (1) Rotate it to the back where it's not visible. (2) Sand it in 30 seconds with fine grit paper. (3) Prime over it – many painters report it becomes nearly invisible. Square and rectangle bases barely have seam lines at all due to the printing geometry.

Can I paint them to match my army theme?

That's the whole idea. Prime black for grimdark. Prime white for bright fantasy. Add Martian Red texture for AdMech. Slap on some Nurgle's Rot for Death Guard. These are blank canvases waiting for your creativity. Many painters make the Hero Base part of the overall narrative base.

What if I need a size you don't list?

Tell us! We're actively expanding the range based on community feedback. If there's demand for a specific dimension, we'll add it to the catalogue. We're hobbyists serving hobbyists – your input shapes the product line.

Rise. Ascend. Exalt. Dominate. Reign. 🗡️