【Automotive Power Probe P200】Compatible with 9V~30V cars. Response time of quick diagnosis 0~2 seconds. Functions include: Component Activation, Multimeter, Relay Test, Fuel Injector, Continuity Test, 0 - 5V Power Supply, Oscilloscop(Display waveform). Suitable for any novice driver or maintenance engineer.

【✅Fuel Injector Test✅ Relay test mode.】It is extremely important to regularly test the fuel injector. Damage to the fuel injector can easily lead to unstable idle speed of the engine, increased fuel consumption, causing engine shock. Prevent an increase in fuel consumption and engine vibration.

【Powering up Components】Testing components under real world conditions using the Probe P200, activate fans, lights, horns,windows, door locks easily with a press of a switch. Fast power support for faulty car components.

【Quickly diagnose the condition of your car】Thanks to the ✅Smart Test function, when you use the probe to test the voltage and resistance of the car, it will automatically become instant auto range, intelligent judgment without manual selection, and display the corresponding parameter values and prompt words on the high-definition LCD screen. It can quickly assist you to diagnose the condition of the car without opening the wiring.

【Multimeter & Oscilloscope Tester】The P200 Circuit tester will be the more versatile and powerful Power Circuit Probe Kit you've ever seen. Contains the multimeter's DC voltage (VDC), resistance (OHM), diode/on-off test (DIO), current (AMP) and frequency test functions, combined with the unique oscilloscope function and buzzer, can test components according to voltage, resistance value, frequency duty cycle, and waveform diagrams to quickly diagnose problems with your circuit system.

【Widely Application】This car electrical tool kit is widely testing continuity, signal circuit, activating components in your hand and in the vehicle, finding bad ground and short circuits, test trailer lights. It's a fast and efficient electrical testing tool designed for the modern automotive technician, mechanic, engineer.

【Upgrade】Please contact us to get the update file

P200 is the only circuit tester that can be upgraded on the market. 
1. Short-Circuit Automatic Protection - if electric tester current overloaded, its internal circuit breaker system will automatically tip for protection. The circuit breaker monitors this tool at all times. As an essential safety measure to prevent overload, it is a very practical function.

2.The component activation function is designed to generate activation signals to the tested components, such as activating lights, motors and other on-board electrical equipment.

3.It can be updated online.After selecting the upgrade mode, connect to the USB, open the computer to upgrade the software, and perform the upgrade to make the automotive circuit tester more powerful and complete.

Relay Test
Circuit tester is capable to test the common automotive relay,

Like 5-terminal relays.

Automotive circuit tester contains the common parameters of multimeters, and can quickly test the DC voltage, resistance, and diode in the circuit system, current, and frequency, bring a lot of convenience to users.

Component Activation
Electric system circuit tester can generate "Activation" signals for components such as light, motors, and other on-board electronic devices.

The output voltage can be set to 0-5V, which is used to verify the wiring of the component under test.

If a short circuit or fault causes the output voltage to be greater than or less than the set value, the device will issue an alarm to remind.

Quick self-test
Hook-up

Unroll the unit’s cable.

Clamp the red clip to the positive terminal of the vehicle’s battery.

Clamp the black clip to the negative terminal of the vehicle’s battery.

Features:

1. Intelligent identification of voltage/resistance
2. Multimeter mode (measure voltage, resistance, diode, continuity, current and frequency)
3. Relay test
4. Injector test
5. Diode test
6. Oscilloscope function
7. 0-5V adjustable power supply
8. Activation of vehicle components
9. Positive and negative polarity test
10. Intelligent circuit breaker protection (adjustable overload)
11. Screen style background optional
12. Network can be upgraded online
13. Built-in Multi-lingual settings.

Product specifications and parameters

1) Display:............ (320*240 DPI) TFT true color display
2) Working temperature: ........... 0-60°C (32-140 F°)
3) Storage temperature:...........40-70°C (-40-185 F°)
4) External power supply: ... 12V or 24V powered by battery
5) Minimum working voltage:...9V
6) Maximum working voltage: 30V
7) Maximum measuring voltage: 150V
8) Minimum measuring voltage: .....................0.1V
9) Resistance measurement range:... 1 ohm~200K ohm
10) Current measuring range: ..................... 0~18A
11) Maximum continuous current: ..................... 18A