7901 LLU MAX | 12mm x 24mm x 6mm | Enduro Bearing
Description
1 x‚ 7901 LLU MAX Bearing
- Bearing Code: 7901 MAX
- Dimensions: 12mm x 24mm x 6mm
- ABEC: 3‚
- Angular Contact Bearing
- Grade: 10
- Seals: LLU
- Grease: CRC Marine
- Application: Frame Pivots
‚
7000 series Angular Contact Bearings
These are‚ Angular Contact bearings and can only be installed in one direction. This is normally with the black seal facing you. They must also have the correct amount of preload applied as per the manufacturer's instructions. If installed incorrectly the bearing will fail! These bearings will enable vertical and horizontal forces to be spread evenly‚ enabling‚ extra strength and increasing their lifespan.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.
Free UK Shipping
Orders made before 11 am are shipped the same day.
Trusted Seller
Independent business with 15+ years bike bearing experience.
60 Days Returns
No-quibble returns or exchanges — always here to help.
Need Help?
Message us anytime — we reply quickly and carry a huge stock.
Blueseal Bike Bearings™ are Bicycle Specific Bearings
Close Contact 2RS LLU Seals
Blueseal Bike Bearings™ use top-quality LLU 2RS close-contact rubber seals. The tighter the seal is to the inner bearing race, the harder it is for water and dirt to get in — and the harder it is for grease to escape.
Max. Fill Premium Grease
Standard bearings contain around 20% generic grease, offering limited resistance against rain, corrosion, and dirt ingress.
Blueseal Bike Bearings™ contain the maximum possible fill of premium Mobil waterproof grease without compromising seal function.
ABEC 3 as Standard
Most non-bike-specific bearings are ABEC 1. Blueseal Bike Bearings™ are ABEC 3 rated, providing smoother running and longer lifespan.
MAX Bearings — 40% Stronger
MAX full complement bearings contain no retaining cage, allowing for a maximum number of ball bearings.
This increases both radial and axial load capacity by up to 40% compared to standard bearings.