Powder coating is a dry finishing process, using finely ground particles of pigment and resin that are generally electrostatically charged and sprayed onto electrically grounded parts. The charged powder particles adhere to the parts and are held there until melted and fused into a smooth coating in a curing oven. Before coating, the parts to be coated are first pretreated similarly to conventional liquid coated parts. The pretreatment process is normally conducted in series with the coating and curing operatios.
|
| WX-101 Electrostatic Powder Coating Machine is our oldest model, very fine in quality,but lowest price.which is used for spraying workpiece with flat and smooth appearance and workpiece with no deep corners. |
| Powder coating applicable: All kinds of powder without the metals. |
|
|
nput Power Voltage
|
110V-120V AC,220V-230V AC (Different countries, different standard)
|
|
Frequency
|
50Hz-60Hz
|
|
Input Power
|
40W
|
|
Electromagnetic valve control power voltage
|
24V DC
|
|
Input air pressure
|
0-0.6Mpa
|
|
Output air pressure
|
0-0.5Mpa
|
|
Max. Air consumption
|
13.2m3/h
|
|
Output powder volume
|
Max. 500g/min
|
|
Output power voltage
|
0 -100KV
|
|
Polarity
|
Negative
|
|
Output current
|
0-150uA
|
|
Gun Weight
|
480g
|
|
Length of Gun Cable
|
4m
|
|
Powder Hopper Volume
|
45L
|
|
| Manual Powder gun with gun cable x 1. |
| Powder Gun Spare Parts x 1 kit. |
| Control Unit x 1. |
| Powder Injector x 1. |
| Fluidized Powder Hopper x 1. |
| Trolley x 1. |
| Oil-water separator x 1. |
| Air pressure regulating valve x 1. |
| Powder Hose ,Air Tubes ,Grounding line: 1kit. |
|