Recessed Ceramic Soap Dish
** Important note **
Dimensions are approximate and may vary slightly from item to item.
Color: White Glossy
Dimensions
Front: 6.5"x6.5"
Back Insert: 5.85"x5.85"
Side Projection: 3.5"
The soap dish is made of Premium ceramic materials.
The soap holder is ready for installation, with no need to waterproof.
For cleaning of the bar soap holder use only all purpose cleaners.
The shower soap holder in wall is perfect for compact bathrooms and a sleek, built-in look.
Easy Installation - complete the installation of your soap holder shower with a few easy steps.
Installation Instructions
Step 1: Select Location
Choose a convenient and accessible spot on the wall.
Ensure there are no pipes, electrical wires, or studs behind the chosen location.
Mark the position with a pencil, using a level to keep it straight.
Step 2: Cut the Opening
Measure the recessed portion of the accessory (the part that fits into the wall).
Transfer those dimensions to the wall, adding about 1/8 in. clearance.
Carefully cut the opening using a tile saw for tiled walls, or a drywall saw for non-tiled surfaces.
Step 3: Prepare the Surface
Clean any dust or debris from the cut opening.
Test-fit the accessory to make sure it sits flush with the wall. Adjust the opening if needed.
Step 4: Insert the Accessory
Press the accessory firmly into the opening until it sits flush with the wall surface.
Use a level to ensure it is straight and properly aligned.
Step 5: Seal with Silicone
Run a clean bead of silicone sealant around all outside edges of the accessory where it meets the tile or wall.
Smooth the silicone with a damp finger or finishing tool for a neat appearance.
Allow silicone to cure fully before use.
Step 6: Final Check
Confirm the accessory is secure and level.
Clean the surface with a soft cloth.
-----
USA SELLER - In stock - Ships the Same Day
-----
Contact Us
For help of any sort, contact us by selecting 'contact seller' option
Visit our store for more products http://stores.ebay.com/FlooringSupplyShop