Gutta Percha Cutter

Features:

1.Ingenious Design: Boasts a sleek, aesthetic look and is ergonomically crafted for comfortable, fatigue-free use.

2.Wireless Handle: Ensures flexible, hassle-free operation, letting you work with ease from any angle.

3.Stable Heating Performance: Delivers consistent heat, reaching a maximum temperature of 280°C for reliable results.

4.Dual High-Capacity Batteries: Equipped with two 1200mAh batteries, providing long-lasting power for extended use.

5.8 Versatile Heating Tips: Comes with 8 distinct heating needle styles to meet the demands of various complex applications.

6.Safe & Durable: Heating needles are high-temperature and high-pressure sterilizable, ensuring safety, hygiene, and long-term durability.

Technical Paraments:

Battery capacity: 1200mAh

Charging power: 1.2V

Weight: 320g

Packing List:

1×main unit

8×tips

1×base

2×1.5V rechargeable AA batteries

1×English Instruction manual

Use:

Fit a cutting tip onto the handpiece.Make sure that the angle of the tip is pointing in the opposite direction to the operating button,This makes work easier.

Important:

Never bend the tip while it is still in the handpiece.

1.Insert the cutting tip into the cavity while it is cold (without pressing the operating button).The gutta-percha point to be cut off must be encircled by the loop of the cutting tip.

2. As soon as the cutting tip is located directly on the canal access,press the operating button.

3.The tip heats up in seconds and the gutta-percha point can be quickly and cleanly removed.

4.After the point has been cut off ,release the operating button. The cutting tip immediately cools down and can be removed from the patient＇s mouth .The operating button is a “contact button” which only switches the button is released,the instrument switches off.

5.Remove the cutting tip from the handpiece after use.

Attention:

1.The host can't be recharged, the battery is non-rechargeable! 

2.Before use, ensure that the tips is in place and firmly connected with the host. 

3.Don't bend the tips when the tips is on the host. 

4.Don't exert too much force during use, which may cause damage to the cutter or affect its service life. 

5. Don't touch the tips at work or touch other people and things with the tips of the host, which can cause danger. 

6.Cleaning the tips must be done in cooling. 

7.If the tips is found to be damaged, please stop using immediately and replace the new tips. 

8.Please don't modify the equipment in any way to avoid harm. 

9.The equipment shall be used within the scope of instructions. The manufacturer shall not be responsible for any operation or use beyond the instructions. 

10.This equipment is only for indoor use. 

11.Heart disease, pregnant women and children should be used with caution. 

12.Recommended to use the original battery, please Replace the battery with an alkaline 1.5V AA battery. 

 &

Endo Heated Pen R21

1.     efficient heat to 220°C in 3s.

2.     4 temperature for most of gutta materials

3.     360° touch to heat up multi-angle operation.

Technical Specification：

Model: R21

Size: 100x100x195mm

Power adapter:Input: AC 110~220V 50/60Hz；Output: DC5V -- 1A

Internal power supply: DC 3.7V 2800mAh

Type of protection against electric shock:Class II

Degree of protection against electric shock:Type c

Operating conditions：

Operating temperature: 5℃ ~ +40℃

Operating humidity: 10%RH ~ 80%RH

Atmospheric pressure: 50kPa ~ 106kPa

Automatic shutdown time: 5 minutes

Packing size: 120x210x68mm

Weight(G.W.): 460g

Packing List:

1×main unit

2×heating needle

1×battery

1×charger base

1×power adapter

1×English Instruction manual

Notice:

1.The heating needle must be cooled to room temperature before cleaning the heating needle.

2.The heating needle can be sterilized by high temperature and high pressure, other parts are

not allowed.

3.Do not use non-volatile disinfectants or similar disinfectants to avoid corrosion of the instrument and serious damage to the product.

 &

 

Endo Motor

Feature：

1.     Built-in 7 programs setting

2.     Equipped with a mini push-type 16:1(left and right reciprocating)contra-angle handpiece

3.     Contra-angle handpiece and lamp holder can with stand 135℃high temperature and high pressure sterilization. 

4.     Built-inlarge-capacity lithium battery

5.     With LED lamp holder,high bright

6.     This product is designed according to ergonomics,with a lightweight body and easy to carry.

Seven programs:

1.     Forward continuous motion

Forward 360°automatic motion,forward rotation plus torque reverse,stop about one second after torque is removed.

2.     Reverse reciprocating motion

Reverse reciprocating motion system,reverse 150°,forward 30°(approximate value)

3.     Reverse continuous motion

Reverse 360°automatic motion,reverse plus torque forward,stop about one second after torque is removed

4.     Forward reciprocating motion

Forward reciprocating motion system,forward 150°,forward 30°(approximate value)

5.     Automatic reverse off

Forward 360°,stop when encountering torque,used for hand-filed reciprocating contra-angle handpieces or reverse-edge filing to remove broken needles

6.     Automatic forward off

Reverse 360°,stop when encountering torque,used for forward-edge filing to remove broken needles

7.   Automatic forward and reverse cycles

Double arrow with A forward 360°automatic motion,forward rotation plus force reverse, remove torque to resume forward rotation

Technical parameters：

Battery voltage：3.7Vdc
Battery capacity：800mAh Host net weight：About 210g
Rated input voltage：100V-240V~50/60Hz，0.5A
Output voltage：5Vdc Output current：1A
Speed range（r/min）：130~600
Speed ratio：16:1
Torque range（N.cm）：0.6~4.0

Packing:

Endomotor Machine *1

Charger*1

Lights holder*2

Adapter*1

Motor cover*1

Brochure*1

Certificate of competency*1

spanner*1

zerk*1