High Speed High Precision Speed Counter Meter Counter Line Speed Meter Length Measuring Roller Encoder

Structural characteristics and main technical specifications

1. Length measurement and length control range: 00000.0-99999.9m, 0000.00-9999.99m, 000000-999999m. Display units are in millimeters, centimeters, decimeters, and meters. The yardage display can be switched with one key! 2. Reversible two-way meter 3. Pulse equivalent: 0.00001～99.9999 adjustable 4. Dimensions (width × height × depth): 160*160*90mm according to the installation opening size (width × height): 68 × 68mm meter wheel circumference 200mm 5: Error adjustment function 6: Initial value setting

THE MAIN FUNCTION

1. Reversible counting: add when the measured object moves in the forward direction, and subtract when it moves in the reverse direction, no commutation error. 2. With power failure information protection function. After a power failure, the original set number and current count value remain in the state before the power failure. After the power supply is restored, the instrument continues to work in the state before the power failure. 3. Fixed-length output: When the meter reaches the set count value (two sets of different values can be set), the instrument outputs the contact signal (normally closed and normally closed), and the normally closed contact can directly control the equipment to stop or cut off others Actuator, alarm, etc., connect the normally open contact to control the machine to start or energize, the alarm is connected to the normally open contact, the alarm reaches the set number of meters, the alarm time can be set arbitrarily from 0.1 to 9.9 seconds, and the two sets of relay output action Set any combination of modes! 4. The alarm function can be achieved in advance by setting the alarm, such as a 9-meter alarm, and the instrument will automatically reset to zero and restart the meter after the alarm reaches 10 meters after 5 seconds! 5. An external reset terminal is used to reset the count display through an external switch operation 6. An external code table button can be used to switch the code table through an external switch 7. Counting value and coefficient value can be set flexibly. Under the condition of unchanged production parameters, one-time setting can work for a long time.