Specifications:

Sensitivity: 0.775V

Signal to noise ratio: 112dB

Conversion rate: 50V/us

Power factor cos (O):>0.95 @>800W

Frequency response: 20HZ-20KHz+/-0.25dB

Size: approximately 48.3X24.5X4.5CM

Distortion:<0.005%

DC residual:<5mV

Damping coefficient:>1000

Input impedance: 30KQ balanced

Voltage/current: 100Vpeak/50Apeak

Working voltage: 90V-264V soil 10%, 50HZ

Power: Each channel outputs 600W

◆ Ultra -large switching power amplifier
◆ The protection functions such as automatic limit output, short -circuit, overload, over -temperature, boot delay and other protection functions
◆ The power amplifier is equipped with a delay startup system, which is damaged by protecting the speaker from impact
◆ The rear panel is equipped with dual channels,
◆ Balance input interface
◆ Speakon output connector
◆ 483mm standard rack structure
◆ The power amplifier part of the switching power supply part has a separate cooling system
◆ The heat dissipation fan is controlled by advanced stepless transmission circuit
◆ 1U design, light body, easy to carry and install

4x Channel
5200 Watts @ 4 Ohms ( 4 x 1300W )
2600 Watts @ 8 Ohms ( 4x 650W )
Output/output (8Ω, 1kHz): 4x650W
Output/OUTPUT (4Ω, 1kHz): 4x1300W
Frequency response/FREQUENCY Response: 20Hz ~ 20KHz ± 3dB
Total distortion/Total Distortion:
1%(8Ω, 350W/time)
Enter sensitivity/Input Sensitivity:+4DB * (1.23V)
Input impedance/input Impedance: 10kΩ (electronic balance/BALANCED)
Signal ratio/S/N Ratio: ≥80dB
Connecting terminal Connector:
Input (CH1-2): XLR input connector; output (CH1-2): Speakon output terminal; power: AC power supply input (CH1-2): xlr input connector; output (ch1-2): Speakon Output; Power: AC Power Supply.
Display light Indicator Lights:
Power display light x1 (green); input display light x 2 (yellow); peak display light x 2 (red); protecting circuit action display light x 1 (red) Power Inicator x 1 (Green), input Indicator X 2 (YELLOW ), Peak Indicator X 2 (Red); Feedback Protect Indicator X 1 (Red)
Power voltage/Power Supply Voltage:
AC110 ~ 120V, 50/60Hz AC220 ~ 240V, 50/60Hz (using internal jump switch/via inside jumping switch)
1/8 rated movement 1/8 Rated Activity Consumed Power: 50W, 80W, 110W
The temperature range of using the environment is worn tempeature range: 0 ~ 50 ℃
The humidity range of the environment is working with Humidity Range:
Below 90% RH/Under 90% RH

Package included:

1x Digital Power Amplifier

If you buy our products, you encounter any problems in the process of using the products please email us at the first time to tell us, we will answer you within 24 hours to provide you with quality service.

DataCaciques