Handheld DC Milliohm Meter DC Resistance Meter Tester Ohmmeter Accuracy 0.1%

It handheld DC milliohm meter is the use of high-performance processors and 3.5" TFT LCD screen smart handheld Meter. Accurate and convenient measurements of passive-components can be achieved in all occasions for a long time. Wide Measurement Range from 10μΩ to 20MΩ, and 20000 readers. It can guarantee 0.05% accuracy, even in the condition of the testing speed under 15t/s. its unique current testing mode can adapt different testing. To apply to long distance control, DAQ and analysis, AT518 is equipped with Mini-USB interface.

AT518 can test all kinds of high-ohm, medium-ohm, low-ohm tester; switch connect, connector contact, relay coil and contact resistance; Transformer, Inductor, motor, deflection coil winding resistance, wire resistance; The metal winding resistance of vehicle, vessels, and airplane; PCD line and hole, etc.

Feature:
  • Gorgeous dual-color cast shell
  • Battery and external power supply
  • Automatic power off Function
  • ABS/ PER/SEQ comparison criteria
  • Comparator Function: GD/NG Show
  • 3.5 inches, Truecolor 16M, TFT-LCD Display
  • Auto Zero-Adjust for each range
  • Four-terminal resistance measurement.
  • Mini-USB interface
  • SCPI compatible command sets
  • Keypad lock function
  • Switch both in English and Chinese.
  • Background-lightness adjustment function
  • Automatic shutdown set
  • Size: 210.76mm (Length)*130.23mm (Width)*37.88mm (Heigth)
  • Weight: 500g
  • Battery: 8.4V, Li, 2200mAh, chargeable
  • Max power: ≤5W
  • Battery capacity: Over 8 hours’ continuous use

Specification:
Parameter DCR
Accuracy 0.1%
Measurement Range 10μΩ～200KΩ
Measurement current I-Max：<1A current mode: high current
Range automatic, manual, nominal, 7 range
Speed 3 times/s
Display ABS/PER/SEQ
Display Max 20000
Adjustment short-circuit reset for all range
Comparator build -in sorting recorder, GD/NG sorting result display
Trigger Internal, manual
Interface Build-in Mini-USB interface
Temperature compensation /
Method 4 terminal shielding (2 check terminal & 2 driving terminal), external shielding ground section
Power Supply Input:100-240V~50/60Hz 0.35A output： DC9V 1A. 8.4V，2200mAh Li battery
Dimension & Weight 130.23 x210.76 x37.88 weight：650g
Accessories ATL501B 4 terminal kelvin test, ATL909 DC adaptor, ATL202 bag, ATL804 Li battery
Optional Accessories ATL105Mini-USB communication cable, ATS518 data acquisition software
Other Functions 5-inch true color 16M color TFT-LCD large font display; keyboard lock, data retention function; compatible with SCPI command set; Chinese and English switching; backlight adjustment; automatic shutdown

Applications:
All kinds of low, medium, high resistor 
Switch contact resistance
Enamel-insulated wire resistance
Connector Contact
Relay/switch connector contacts
Transformer, Inducer, Motor, Deflection coil winding resistance
Welding Spot
Wire resistance
Metal riveting resistance of vehicle, vessels, airplane
Pure resistance 
The resistance of motor and transformer 
Printed board line and hole resistance
Low resistance character of Electromechanical Components