17x9 Silver Interceptor Ford Falcon Steel Wheel

5×114.3 PCD | +6ET | 337mm ID

Diameter: 17"
Width: 9"
Stud Pattern: 5 × 114.3 (5 x 4.5)
Centre Bore: 75.1mm
Offset: +6ET
Backspace: 5.25" (133.35mm)
Front Space: 4.75" (120.65mm)
Suit 60° Taper Seat Wheel Nuts
Centre ID: 337mm

High quality metallic silver powder-coated finish.
Brand new in box.

Centre Cap Compatibility

75mm Chrome Push Through Centre Cap
Chrome Spider Cap 5-114.3 PCD Application
Ford Chrome Skull Cap 5-114.3 PCD Application (ABS Plastic)
Ford Silver Skull Cap 5-114.3 PCD Application (ABS Plastic)
Ford Black Skull Cap 5-114.3 PCD Application (ABS Plastic)
Chrome Ford Interceptor Cap 5-114.3 PCD Application (ABS Plastic)
Silver Ford Interceptor Cap 5-114.3 PCD Application (ABS Plastic)
Black Ford Interceptor Cap 5-114.3 PCD Application (ABS Plastic)

Product Description

High quality interceptor style steel wheel manufactured to meet international standards. Designed for classic Australian and US Ford applications requiring correct fitment, strength, and a period-correct appearance.

Vehicle Fitment Guide – 5×114.3 PCD

This wheel may suit the following vehicles with the correct offset, suspension clearance and brake setup:

Ford – Australian (Pre-AU Models)
Ford Falcon XR / XT / XW / XY (1966 - 1972)
Ford Falcon XA / XB / XC (1972 - 1979)
Ford Falcon XD / XE / XF (1979 - 1988)
Ford Falcon EA / EB / ED / EF / EL (1988 - 1998)
Ford Fairlane ZA / ZB / ZC / ZD (1967 - 1972)
Ford Fairlane ZF / ZG / ZH (1972 - 1979)

Ford – US Pattern Vehicles
Ford Fairlane FB / FC / FD (1962 - 1965)
Ford Mustang – 5-Lug Models (1965 - 1973)
Ford Maverick – 5-Lug Models (1969 - 1977)

Mopar
Dodge Charger (1966 - 1978)
Dodge Challenger (1970 - 1974 First-Gen)

Dodge Coronet (1965 - 1976)
Dodge Dart (1973 - 1976 Models Only)
Plymouth Road Runner (1968 - 1975)
Plymouth Barracuda (1970 - 1974 Models Only)
Plymouth Duster (1973 - 1976 Models Only)
(Does NOT fit early 1960s-1972 Dart, Duster, or Barracuda models unless they have been converted from the factory small 5x101.6mm pattern to the larger 5x114.3mm layout)

Chrysler / Valiant – Australian
Valiant VH / CH / VJ / CJ (1971 - 1975)
Valiant VK / CK / CL / CM (1975 - 1981)
Valiant Charger – VH / VJ / VK / CL (1971 - 1978)

(Does NOT fit early RV1, SV1, AP5, AP6, VC, VE, or VG models unless converted to the later VH-CM 5x114.3 stud pattern).

Important Fitment Notes

Vehicle must have 5×114.3 PCD hubs or conversions.
Wheel width 17x9 is typically suited to rear fitment only on most vehicles.
Guard rolling, suspension mods or brake clearance checks may be required.
Fitment is based on factory vehicles only unless otherwise stated.
Always confirm offset, backspace and clearance before purchasing.

PLEASE READ BEFORE PURCHASE

Wheels are not a one-size-fits-all product. Even if a wheel matches your vehicle's stud pattern, there are multiple other critical factors that determine whether the wheel and tyre combination will fit safely and correctly.

It is the buyer’s responsibility to confirm fitment before purchasing.

Key Fitment Factors to Check:

Wheel Width (Front & Rear): Ensure the width is suitable for your vehicle. Front fitment is often more restrictive than rear.
Tyre Size: Incorrect tyre sizing can cause scrubbing on guards, suspension, or inner chassis. Always match tyre size appropriately to wheel width.
Tyre Bulge: Wider tyres on narrower wheels can create sidewall bulge, increasing the chance of rubbing.
Offset (ET) & Backspacing: Critical for correct positioning inside the wheel well. Incorrect offset can cause contact with guards, suspension, or chassis components.
Actual Wheel Width: Overall wheel width is typically ~1" wider than the stamped size. Always measure backspace and front space from the vehicle for accuracy.
PCD (Stud Pattern): Must match your vehicle exactly.
Centre Bore: Must match or be compatible with your hub. Hub-centric fitment is recommended.
Brake Clearance: Check clearance for upgraded brakes including Wilwood, Brembo, or other custom brake setups.
Suspension Setup: Lowered vehicles or modified suspension may reduce clearance.
Guard Clearance: Rolled or unrolled guards will affect fitment.
Diff & Rear End Modifications: Shortened or modified differentials will change fitment requirements.
Tubbed vs Non-Tubbed: Tubbed vehicles allow for wider wheel fitment than standard wheel wells.
Exhaust Clearance: Some exhaust systems run close to the inner wheel and may cause interference.
Steering Lock Clearance: Front wheels must clear at full lock without rubbing.

Important Notes:

Fitment may vary even between vehicles of the same make and model.
Aftermarket modifications significantly impact wheel fitment.
We strongly recommend test fitting or consulting a professional before purchase.

BCI Wheels is not responsible for incorrect fitment due to lack of measurement or failure to consider the above factors.

If you are unsure, please contact us prior to purchasing with your full vehicle specifications and modifications so we can assist you.

Payment

Payment is accepted via eBay approved methods. Orders will be dispatched once payment has cleared.

Delivery & Returns

Default shipping applies to Melbourne, Sydney & Adelaide metro areas only. All other locations must contact us for a freight quote prior to purchase.

Returns are accepted for items that are faulty, damaged or not as described, in line with Australian Consumer Law. No returns for change of mind or once tyres have been fitted.

Contact Us

Please contact us via eBay Messages for any fitment, delivery or product enquiries.

BCI Wheels

Classic • Muscle • 4WD Steel Wheels

bciwheels.com.au