Summary
The GEPRC team has newly developed a 2-inch frame: GEP-CL20.   The 2-inch frame can be shuttled in a narrow space, and can be adapted to O3 VTX, and can also shoot shocking effects in a narrow space.   The under-mounted gimbal can easily eliminate the high-frequency vibration and jello problems of the camera.   Soft connection damping design of the camera gimbal and can also be mounted with a naked base, which supports the installation of Naked 8, Naked 10, Insta360 Go2 and compatible for DJI Action2 cameras.

The flight controller mouting hole spacing is 25.5mm*25.5mm, which is compatible with various VTX holes on the market with 20mm*20mm/25.5mm*25.5mm.   The 9mm * 9mm motor mounting hole is used to install larger 12-13 series motors, and the compact body makes the flight more confident.

Specification

Model: GEP-CL20

Wheelbase: 100mm

Main plate: 2.5mm

Bottom plate: 1.5mm

Camera gimbal plate: 2.0mm

lens gimbal triangle plate : 1.5mm

Motor plate gasket: 2.0mm

FC mounting holes: 25.5mm x 25.5mm

VTX mounting hole: 20mm x 20mm /25.5mm x 25.5mm

Motor mounting hole: 9mm x9mm

FPV camera spacing: 20mm

Suitable propeller size: 2 inch propeller

Weight: 53.4g

Flight controller: GEP-F4-35A AIO (mounting hole: 25.5mm×25.5mm)

Motor: 1303.5 (mounting hole: 9mm×9mm)

ESC: 35A

Propeller: 2 inch

Recomended Battery: 4S 660mAh

Feature
1.Combining aesthetics and engineering for compact design

2.Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image.

3.2 inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting.

4.SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried.

5.Design the outer EVA damping ring to effectively reduce the impact force.

Includes
Plate:

1 x Main plate: 2.5mm

1 x Bottom plate: 1.5mm

1 x Camera gimbal plate: 2.0mm

1 x lens gimbal triangle plate : 1.5mm

1 x Motor plate gasket: 2.0mm

Screw package:

4 x M2*1.9-OD4.9 self-clinching nut-brass color M2

1 x 7075 Aluminum Column M23.528

1 x 7075 Aluminum Column M23.525

1 x Single-ended bright-edge aluminum column M23.528

1 x Single-ended bright-edge aluminum column M23.525

2 x Round head screw with pad M2*8

18 x Round head screw M2*8

4 x Round head screw M2*5

6 x Round head screw M2*4 X6

10 x Round head screw M2*12

4 x Round head screw M2*16

4 x Half-round head M1.6*8 X4

18 x Round head screw M2*7

10 x self-clinching nut M2

10 x Nylon nut M2

4 x Nylon column M2*5mm

4 x Camera head shock absorbing rubber ring

5 x Lens head vibration dampening rubber

4 x BEC silicone gasket
3D printed parts:

1 x VTX Antenna printout PJ000065 (large port)

1 x VTX Antenna printout GP105633 (small port)

1 x Receiver mount 3D printout (vertical)

1 x Receiver mount 3D printable (lying)

1 x TBS Antenna mount

1 x Lens printout (1 hole model)

1 x Lens printout (2 holes)

Injection molded parts:

4 x Propeller guard

Other accessories:

1 x Naked 8 base

1 x 4S Naked power cable (with balanced terminal head)

2 x Cinelog20 battery anti-slip pad (square)

2 x Cinelog20 tripod shock pad (square)

4 x EVA edge protection cotton CineLog20 protection cotton

2 x Receiver antenna wand 100mm

2 x Battery tie M15*150

1 x L-shaped screwdriver 1.5MM

2 x 3M double-sided adhesive

1 x Keychain