1144 Piece Tile Leveling Kit With Spacers Tiling DIY Home Wall Floor Clips Tool.
Condition is New and each kit contains the following items (as shown in full in the 2nd picture):
- 120 x Tile Positioning Leveler
- 500 x 2mm tile spacers
- 500 x 3mm tile spacers
- 4 x Wrenches
- 20 end T piece replacements for Tile Positioning Leveler.
Tips for use:
-Laying the tile, leave at least a 2mm gap (use cross spacer).
--Insert the end T piece of positioning leveler along the gap in the tile.
Rotate the end T piece 180 degrees whilst under the tile gap, the T piece will now under the gap between the two tiles.
-Adjust the Tile Positioning Leveller with your hand/wrench until the two tiles are level.
-About 5-6 hours after levelling (dependant on conditions & cement used), before the cement/adhesive is completely dry, rotate the Tile Positioning Leveller in the reverse direction and remove them and the T Piece ends.