This 3D printed black plastic adapter is designed to mount a 360mm radiator/ AIO on the front of the Fractal Design Focus G pc case.
This 2-piece adapter mounts to the case using OEM case holes (no drilling or cutting required) and allows the use of the OEM front filter (snaps in similar to how it normally does).
Radiator hoses and AIO waterblock pass through the two upper 5.25" drive bays, and require that no accessories be installed in that location. This adapter can not be used when accessories are installed in the two upper 5.25" drive bays.
Recommended Radiator Hose Length: ~450mm
Minimum Adapter Overall Thickness:
- To select minimum adapter overall thickness, add 8mm to the combined thickness of your fans + radiator.
- Example: Arctic Liquid Freezer III Pro 360: the overall thickness of that AIO is 66mm, so minimum adapter thickness would need to be 66mm + 8mm = 74mm (round up to 75mm). That arrangement would give you at least 5mm of clearance between the fans and PC case.
Custom sizing/ features available upon request.
Custom colors available upon request. Custom colors may increase handling time depending upon availability. Please contact prior to purchase to discuss availability.
Listing includes the following hardware:
- Radiator screws: QTY 12, 6-32 x 1/4" length. Ensure these are compatible with your specific radiator.
- PC Case Mounting Screws: QTY 8, 6-32 x 1/2" length.
- Washers: QTY 8, #6 x 5/8" OD. Note that washers slide underneath the rolled edge of the case during installation.
If you have any questions about installation etc, please don't hesitate to contact me. I do my best to respond to all inquiries same day.
Components are FDM 3D printed and postprocessed, but may still exhibit cosmetic characteristics of that manufacturing process (layer lines, nozzle marks, stringing, etc).
PC case/ cooler/ fans not included with listing.
See our other listings for more spacer/ adapter/ reducer solutions.