Specification:
Material: Zinc Steel
Surface Finish: Galvanized
Color:Silver
Brake Line Tubing Diameter: 3/16 In. O.D. (Note: 3/16 "≠ 1/4")
Brake Line Tubing Wall Thickness: 0.028 In.(0.70mm)
Brake Line Length: 50FT Coils (50ft = 600in = 15.24M)
Features：
0.028" Wall Thickness So That It Is Easy To Flare, Bend And Install.You Can Hand Bend Lines.
Rust And Corrosion Proofing
Includes 16 Fittings: 2 x 3/16” (7/16-24) Inverted Tube Nut, 10 x 3/16” (3/8-24) Inverted Tube Nut, 2 x 3/16” (1/2-20) Inverted Tube Nut, 2 x 3/16” (9/16-18) Inverted Tube Nut.
Package Includes: 1* 3/16 In.OD 50 FT Roll Brake Line Tubing With 16 Fittings
1x Zinc Steel Brake Line Tubing Kit 50Ft. Of 3/16”OD Roll Coil All Size Fittings
Description:
- This Is One Roll Of 3/16" Brake Line.
- Used For All Automotive Applications.
- Clean Finish Inside And Out
- Leak And Vibration Resistance
- Fits For Most Hydraulic Braking Systems, Fuel Systems, And Transmission Systems,Etc
- It Is Also Widely Suitable For Household, Industrial And Commercial Use.
Specification:
- Material: Zinc Steel
- Surface Finish: Galvanized
- Color:Silver
- Brake Line Tubing Diameter: 3/16 In. O.D. (Note: 3/16 "≠ 1/4")
- Brake Line Tubing Wall Thickness: 0.028 In.(0.70mm)
- Brake Line Length: 50FT Coils (50ft = 600in = 15.24M)
Features：
- 0.028" Wall Thickness So That It Is Easy To Flare, Bend And Install.You Can Hand Bend Lines.
- Rust And Corrosion Proofing
- Includes 16 Fittings: 2 x 3/16” (7/16-24) Inverted Tube Nut, 10 x 3/16” (3/8-24) Inverted Tube Nut, 2 x 3/16” (1/2-20) Inverted Tube Nut, 2 x 3/16” (9/16-18) Inverted Tube Nut.
Package Includes: 1* 3/16 In.OD 50 FT Roll Brake Line Tubing With 16 Fittings
Note:
Note:
- We Provide Clear Pictures, Measurements Whenever Possible. Please Check Everything You Can To Make Sure The Item Is The One You Need.
- Please Allow 0.5-1 Inch Difference Due To Manual Measurement. (1 Inch = 2.54 Cm)
- No Instructions Included. Professional Installation Is Highly Recommended!
| Brand | Unbranded |
|---|---|
| Manufacturer Warranty | 3 Months |
| Country/Region of Manufacture | China |
| Material | Zinc Steel |
| Finish | galvanized |
| Brake Line Tubing Diameter | 3/16 in. O.D.( note：3/16"≠1/4" ) |
| Type | Brake Line |
| color | Silver |
| Brake Line Tubing Wall Thickness | 0.028 in |
| Placement on Vehicle | Left, Right, Front, Rear, Upper, Lower |
| Brake line length | 50FT/15.24m/600inch |
| Fitment Type | Direct Replacement |
| Features | Rust Resistant |
