Washing Machine Washer Timer Control for Whirlpool 8541110 1018683 WP8541110

Washing Machine Washer Timer Control for Whirlpool 8541110 / 1018683 / WP8541110

The Whirlpool washer timer control (part numbers 8541110, 1018683, and WP8541110) is a crucial component in many Whirlpool washing machines. It controls the timing and sequencing of the wash cycles, including fill, wash, rinse, and spin functions. Below are the specifics, troubleshooting tips, and installation instructions for this timer control, as well as the most popular model numbers it is used in.

Specifics

  • Part Numbers: 8541110, 1018683, WP8541110

  • Type: Mechanical Timer Control

  • Compatibility: Designed for Whirlpool, Kenmore, and other branded washing machines.

  • Functions: Controls the wash cycle timing, including agitation, rinsing, and spinning.

  • Appearance: Typically a round knob with multiple settings for different wash cycles.

Most Popular Model Numbers It Is Used For

This timer control is compatible with a wide range of Whirlpool and Kenmore washing machines. Some of the most popular models include:

  • Whirlpool:

    • LXR7144EQ0

    • LXR7144EQ1

    • LXR7144EQ2

    • WTW5000DW

    • WTW5700SW

    • WTW5800SW

    • WTW5900SW

  • Kenmore:

    • 110.92581200

    • 110.92581201

    • 110.92581202

    • 110.92581203

    • 110.92581210

    • 110.92581211

Troubleshooting

If your washing machine is experiencing issues, the timer control may be the culprit. Here are some common symptoms and troubleshooting steps:

  1. Washer Won’t Start:

    • Check if the timer knob is stuck or difficult to turn.

    • Inspect the timer for visible damage or burnt connections.

    • Test the timer with a multimeter for continuity.

  2. Washer Stops Mid-Cycle:

    • The timer may be failing to advance to the next cycle.

    • Ensure the timer knob is properly aligned and not slipping.

  3. Incorrect Cycle Timing:

    • If the washer skips cycles or runs for too long, the timer may be faulty.

    • Verify that the timer is not pausing or advancing incorrectly.

  4. No Agitation or Spin:

    • The timer may not be sending power to the motor or transmission.

    • Test the timer for proper electrical connections.

Installation Instructions

Replacing the timer control is a straightforward process. Follow these steps:

  1. Safety First:

    • Unplug the washing machine from the power outlet.

    • Turn off the water supply to the machine.

  2. Access the Timer:

    • Remove the control panel by unscrewing the screws or releasing the clips.

    • Locate the timer control, which is usually behind the knob on the control panel.

  3. Remove the Old Timer:

    • Take a photo or note the wiring connections for reference.

    • Disconnect the wires from the old timer.

    • Remove the timer by unscrewing any mounting screws.

  4. Install the New Timer:

    • Position the new timer in place and secure it with screws.

    • Reconnect the wires according to your notes or photo.

    • Ensure all connections are secure.

  5. Reassemble the Control Panel:

    • Reattach the control panel to the washing machine.

    • Secure it with screws or clips.

  6. Test the Washer:

    • Plug the washing machine back in and turn on the water supply.

    • Run a test cycle to ensure the new timer is functioning correctly.

Additional Notes

  • Always refer to your washing machine’s service manual for model-specific instructions.

  • If you’re unsure about handling electrical components, consult a professional technician.

This timer control is widely used in Whirlpool and Kenmore top-load washing machines, making it a common replacement part for many households. Proper installation and troubleshooting can help restore your washer’s functionality.