Oven Range Spark Module for KitchenAid Whirlpool (W10475147, 71002783, 7431P038-60)

The Oven Range Spark Module is a critical component in gas ovens and ranges, responsible for generating the spark needed to ignite the gas burner. Below are the specifics, troubleshooting tips, installation instructions, and popular model numbers this module is used for.

Specifications

• Part Numbers:

  • W10475147

  • 71002783

  • 7431P038-60

• Compatibility: Designed for KitchenAid, Whirlpool, Maytag, and other brands under the Whirlpool Corporation umbrella.

• Function: Controls the ignition system for gas burners and oven bake/broil functions.

• Voltage: Typically operates on 120V AC.

• Connections: Includes wiring harness connections for the igniter, gas valve, and control board.

Most Popular Model Numbers It Is Used For

This spark module is compatible with a wide range of KitchenAid, Whirlpool, and Maytag gas ranges and ovens. Some of the most popular models include:

• KitchenAid:

  • KFGC506JSS

  • KFGC500JSS

  • KFGC506JBL

  • KFGC500JWH

• Whirlpool:

  • WFG320M0BS

  • WFG320M0BW

  • WFG320M0BZ

  • WFG320M0BQ

• Maytag:

  • MGR6775ADB

  • MGR6775ADS

  • MGR6775ADW

Troubleshooting

If your oven or range is not igniting, the spark module may be faulty. Here are some common symptoms and troubleshooting steps:

1. No Spark at Burners:

   • Check if the module is receiving power (use a multimeter to test voltage at the module).

   • Inspect the wiring harness for damage or loose connections.

   • Ensure the spark electrode and igniter are clean and properly aligned.

2. Intermittent Ignition:

   • Test the spark module for consistent output.

   • Check for loose or corroded wiring connections.

3. Continuous Sparking:

   • This could indicate a faulty spark module or a short in the wiring.

   • Replace the module if sparking does not stop after ignition.

4. Oven Not Heating:

   • If the oven burner does not ignite, test the spark module and igniter.

   • Ensure the gas supply is turned on and the gas valve is functioning.

Installation Instructions

Replacing the spark module is a straightforward process. Follow these steps:

1. Safety First:

   • Turn off the power to the range at the circuit breaker.

   • Shut off the gas supply.

2. Access the Spark Module:

   • Remove the back panel or control panel of the range (depending on the model).

   • Locate the spark module, which is typically near the burner controls.

3. Disconnect Wiring:

   • Take a photo of the wiring connections for reference.

   • Disconnect the wiring harness from the module.

4. Remove the Old Module:

   • Unscrew or unclip the old module from its mounting location.

5. Install the New Module:

   • Secure the new module in place.

   • Reconnect the wiring harness as per your reference photo.

6. Reassemble and Test:

   • Reattach the back or control panel.

   • Restore power and gas supply.

   • Test the ignition system to ensure proper operation.

Additional Notes

• Always refer to the specific range or oven’s service manual for detailed instructions.

• If you are unsure about handling gas or electrical components, consult a professional technician.

This spark module is widely used in many KitchenAid, Whirlpool, and Maytag models, making it a common replacement part for gas range ignition issues.