The W10524469 is a dishwasher door gasket seal compatible with various Kenmore and Whirlpool dishwasher models. It ensures a watertight seal between the dishwasher door and tub, preventing leaks during operation. Below are specifics, troubleshooting tips, and installation instructions for this part.
Part Number: W10524469
Compatibility: Designed for Kenmore and Whirlpool dishwashers. Check your dishwasher's manual or model number to confirm compatibility.
Material: Typically made of durable rubber or silicone to withstand heat, moisture, and detergent exposure.
Dimensions: The gasket is designed to fit specific dishwasher models, so ensure it matches your unit's requirements.
If your dishwasher is leaking or the door isn't sealing properly, the gasket may be the issue. Here are some common problems and solutions:
Dishwasher Leaking from the Door:
Cause: The gasket may be worn, cracked, or misaligned.
Solution: Inspect the gasket for damage or debris. Clean it thoroughly and ensure it’s seated correctly. If damaged, replace it.
Door Not Sealing Properly:
Cause: The gasket may be loose, deformed, or improperly installed.
Solution: Check the gasket's alignment and ensure it’s securely fitted. Replace if it’s stretched or deformed.
Mold or Mildew on the Gasket:
Cause: Moisture and food particles can cause mold growth.
Solution: Clean the gasket with a mixture of vinegar and water or a mild detergent. Replace if cleaning doesn’t resolve the issue.
Gasket Hardening or Cracking:
Cause: Over time, the rubber can degrade due to heat and detergent exposure.
Solution: Replace the gasket if it’s no longer flexible or shows signs of cracking.
Replacing the dishwasher door gasket is a straightforward process. Follow these steps:
Screwdriver (Phillips or flathead, depending on your model)
Replacement gasket (W10524469)
Clean cloth
Turn Off Power and Water Supply:
Unplug the dishwasher or turn off the circuit breaker.
Shut off the water supply to prevent leaks.
Open the Dishwasher Door:
Fully open the door to access the gasket.
Remove the Old Gasket:
Locate the gasket around the door's inner edge.
Gently pull the gasket out of its channel. If it’s glued, carefully peel it away.
Use a screwdriver to remove any retaining screws or clips if necessary.
Clean the Gasket Channel:
Wipe the channel where the gasket sits to remove any debris, mold, or old adhesive.
Install the New Gasket:
Start at one corner and press the new gasket into the channel.
Work your way around the door, ensuring the gasket is evenly seated.
If the gasket has adhesive, press firmly to secure it.
Reattach Any Screws or Clips:
If your model uses screws or clips to hold the gasket in place, reattach them.
Test the Door Seal:
Close the dishwasher door and check for proper alignment.
Run a test cycle to ensure there are no leaks.
Regularly inspect the gasket for wear and tear.
Clean the gasket periodically to prevent mold and debris buildup.
Avoid overloading the dishwasher, as this can strain the door and gasket.
By following these instructions, you can ensure your dishwasher door gasket functions properly and extends the life of your appliance.