1992-1995 B16A Civic SiR II JDM

1992-1995 B16A2 Civic Vti EDM

1999-2000 B16A2 Civic Si USDM

1994-1997 B16A3 Del Sol VTEC USDM

1994-1997 B16A3 Del Sol Vti-T EDM

1994-1997 B16A3 Del Sol Vti-T EDM

1996-2000 B16A4 Civic SiR II JDM

1997-2001 B16B Civic Type-R JDM TYPE R

1994-2001 B18B1 Integra USDM

1994-1995 B18C Integra Si VTEC JDM

1995-1999 B18C Integra SiR-G JDM

1996-2000 B18C Integra Type R JDM

1994-2001 B18C1 Integra GS-R USDM

1996 B18C3 Civic VTi 1.8

1997+ B18C4 Civic 1.8 Vti EDM

1997-1998 B18C5 Integra Type R USDM

2000-2001 B18C5 Integra Type R USDM

1996+ B18C6 Integra Type R EDM

1996+ B18C7 Integra Type R Australia

**This kit allow to Retain AC & Power Steering System

**Minor modification require for Radiator, intercooler or hardware fitting

**Designed for most vehicle running a B16/B17/B18/B20 swap (Civic, Integra, Del Sol etc)

**Major modification for 88-91 Civic CRX ef models

**Professional TURBO INSTALLER is Highly recommend. Any damage during installation will not be refunded.

Condition:

100% Brand New Never Used or installed.

TURBOCHARGER

Turbo Spec:

Standard 5 bolt T3 Downpipe Flange.

5 Bolt Standard Hot Side.

Standard T3/T4 Flange.

Oil Inlet - 1/8 NPT Oil Inlet.

Bearing Type - Journal Bearing.

Wet Floating Bearings.

Cooling Type: Oil Cooled.

Compressor Spec:

3" Compressor Inlet.

2.130" Inducer.

2.755" Major.

2" Compressor Outlet .

T04B/T4 Type Compressor Housing.

Compressor .49 A.R.

Compressor .50 Trim.

8 Blade Type T4 Compressor Wheel.

Turbine spec: 

T3 Type Turbine flange.

T3 5 bolt flange.

Turbine .57 A.R. 

2.205" Minor and 2.570" Major Propellar.

T3 Turbine Housing.

2.274" Outlet.

12 Blade Type Turbine.

BOTTON MOUNT MANIFOLD

Standard T3/ T4 (T03/ T04) Turbo Flange Configuration Outlet.

Included Wastegate Flange for 35mm/38mm external WG.

Increase Engine Intercooler Output and Efficiency.

Made of High Quality Cast Iron Material for Strength and Durability.

DOWNPIPE

Made by High Strength T-304 Stainless Steel Construction.

Increases High Flow Air Rate and Maximizes Performance.

TIG Welded CNC Machined Flange and Mandrel-Bent Piping.

Made of High Quality T304 Polished Stainless Steel Material.

Pre-Weld O2 Bung.

BOOST GAUGE

measures up to 35 psi in pressure.

Digital display with Blue and Red LED.

Smoke tint lens during the day

clear and bright LED Display during the night.

High accuracy and easy operation.

INTERCOOLER

6061 Light Weight Billet Aluminum Construction.

Tube & Fin Light Weight Design.

Construction: Machine Cut and Stamped Hand Welded.

Working Pressure: 5~50PSI.

Pressure Drop:2~5psi@35psi;0.2~0.5psi@15psi.

Hot Air Temperature: 32°F~302°F (0°C~150°C)

Compress Air Flow Rate: < 350 Cubic Feet/Min Rated to 500 Max HP.

Overall Size - 28.95" x 7" x 2.5" 2.5" 

Core Size - 21.5" x 6.5" x 2.25"

In/Outlet - 2.5 OD

PIPING KIT

Made of High quality T-6061 LIGHTWEIGHT Aluminum Piping.

Powder-Coated Surface Finish.

2.5" / 2.25" Intake piping Diameter.

2.0mm Pipe Thickness.

High Strength Silicon Coupler Hoses (3 Layers of Silicone)

Durable Stainless Steel T-Bolt Clamp Included.

Increase 65% Air Flow comparing with other Standard Piping.

Come with BOV pre-weld Flange.

SILICONE COUPLER

For High Temperature and High Boost Application.

Withstands Operating Temperatures from -65F to 500F Degrees Fahrenheit.

Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine Movements.

4-Ply Nylon for Strong Reinforcement.

Working pressure 80 PSI.

Burst pressure 245 PSI.

INTAKE FILTER

Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable.

Improves Up to 95% Filtration Efficiency.

Designed to increase horsepower and acceleration.

Width: 6" Inlet: 3.0" Overall Tall: 3.5" Mesh Tall: 2.5"

SHORTY EXTERNAL WASTEGATE

High strength Alloy aluminum body with steel head.

Comes with 8 psi spring installed.

Protect the turbo system from over boosting.

Complete install kit included .

BOOST CONTROLLER

Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs.

High Performance Manual Boost Control From 0~30 psi Capacity.

CNC Machined Light Weight and Resistant to Rust.

Hose clamp and all necessary hardware for complete installation.

1-30 PSI Adjustable.

BLOW OFF VALVE

Aggressive JDM racing discharge sound.

8 Discharge ports that draw in surrounding air and release a unique discharge sound.

40mm hard-anodized valve for increased airflow.

Dual spring system promoted response and allows for high boost pressures.

Support up to 30 PSI boost pressure.

OIL DRAIN & FEED LINE

OIL DRAIN FEED LINE.

10AN Fittings.

Inner Diameter: 0.50"

Length: 17.00"

CNC Machined Turbo Adapter Plate.

Weldable 10AN Oil Pan Fitting Included.

Inner Diameter: 0.25"

Length: 36.00"

1/8 NPT Fittings Natural Polish Finish.

CNC Machined Turbo Adapter Plate.

Brass Fitting Block Fitting and Port Cover Included.

NOTICE

    This auction is for Honda B-series B16 B17 B18 B20 Dual Cam Dohc models only.

    For emissions related items please check with your local jurisdiction for emission specific requirements before purchasing. No installation instruction included unless otherwise specified. If item is questionable please consult your local professional/mechanic before making purchase.

    Color may randomly selected depend on hand or inventory.

    NO instructions included. modification might required for complete installation.