From the brand

Previous page
Next page

From the manufacturer

Dupont header
DuPont Tyvek 400
B07KRXXFGZ Module
Protection, Durability, Comfort

TY198TWHXX0025PI
Taped seams
Attached hood (respirator fit)1
Storm flap
Elastic wrists
Elastic ankles
CE certified
Category III Type 4-B, 5-B and 6-B
Packaged individually
SIZE RANGE SM–6X
TY198S TY198T
1 Respirator fit hoods are designed with a longer zipper,
extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. Seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some
hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
Note: Not all sizes available in all styles.
Warning: Tyvek® should not be used around heat, flames, sparks or in potentially flammable or explosive
environments. Garments made of Tyvek® fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces
in conditions where slipping could occur.

designations are subject to change without notice.
Tyvek® 600 garments are composed of
flashspun high-density polyethylene,
which creates a unique, nonwoven
material available only from DuPont
Tyvek® 600 Type 4/5/6 coveralls offer the
following safety and comfort benefits:
• Chemical protective clothing,
Category III Type 4-B, 5-B and 6-B
• Protection against infective agents
(EN 14126)
• Resistance to penetration by
bloodborne pathogens using
bacteriophage Phi-X174 (ISO 16604)
• Resistance to penetration by blood
and body fluids using synthetic blood
(ISO 16603)
• Fabric and seams offer chemical
permeation barrier to low
concentration water-based
inorganic chemicals
Tyvek® 600 is white
PI = Packaged individ


MAIN FEATURES AND BENEFITS
RECOMMENDED FOR;
  • Clean room cleaning and preparing
  • Production line support & maintenance
  • Maintenance of plant and machines
  • Veterinary Services
  • Cleaning of plant and machines
PRIMARY INDUSTRIES
  • Agriculture
  • Automotive
  • Automotive Aftermarket
  • Chemical
  • Defense
  • Emergency Medical Services
  • Food Processing
  • Life Sciences
  • Machinery and Equipment
  • Metal fabrication
  • Oil and gas
  • Utilities


  • Proven barrier protection against liquids with low chemical concentrations and biological risks from liquids and particles
  • Sits comfortably with less risk of heat stress due to the water vapor permeable ('breathing') material
  • Optimized fit for added wearer comfort and safety
  • Antistatic, tested according to EN 1149-5
  • Low-lint, reduces the risk of cross-contamination in critical areas
  • Silicone-free, important when spraying paint
DESCRIPTION
  • Specialized protection:  grants wearers moderate chemical protection*, resisting liquid and particulate biological hazards (including radioactive particulates**)
  • Added defenses: This protective body suit also meets EN 14605 and ASTM F1670/1671 standards for bloodborne pathogen protection and DIN 32781 requirements for pesticide resistance
  • Advanced breathability: The use of microporous polyethylene laminate nonwoven fabric makes it water vapor-permeable, reducing heat stress
  • Certified antistatic capabilities: In addition, this protective suit satisfies EN 1149-5 antistatic standards
  • Reduced cross contamination risks: Low-linting fabric lessens cross contamination risk in critical areas
  • Limited allergy and surface defect risks: Latex- and silicone-free by design, risks of Type IV latex allergies or contaminant transfer to metal when spray-painting are minimized
  • Enhanced fit and features: This chemical-protective suit’s optimized fit and finger loops enhance comfort and user-friendliness, while a three-piece hood provides added protection and a two-way front zipper with resealable storm flap enhance practicality
    • *CE Category III Type 5/6 protection

RECOMMENDED FOR

  • Clean room cleaning and preparing
  • Production line support & maintenance
  • Maintenance of plant and machines
  • Veterinary Services
  • Cleaning of plant and machines
PRIMARY INDUSTRIES
  • Agriculture
  • Automotive
  • Automotive Aftermarket
  • Chemical
  • Defense
  • Emergency Medical Services
  • Food Processing
  • Life Sciences
  • Machinery and Equipment
  • Metal fabrication
  • Oil and gas
  • Utilities


BONDED SEAMS

Superior strength, liquid and particle barrier

SUIT FEATURES

• Collar
• Elasticated hood, waist, wrists and ankles
• 2-way front zip with resealable storm flap
• Finger loops


COLORS

White

SIZES

S-5XL

  • PRODUCT MATERIALBONDED POLYETHYLENE LAMINATE WITH MICROPORES
    •  
  • SEAM TYPEBOUND SEAMS
    •  
  • WEIGHT63 GR/M2
    •  
  • OVERVIEW OF STANDARDSCE CATEGORY III
  • TYPE 4-B
    • TYPE 5-B, TYPE 6-B, EN 1073-2, EN 14605, DIN 32781, EN 1149-5)

PRODUCT MATERIAL

TYVEK 600

DESIGN FEATURES

Coverall, three-piece hood, 2-way front zip with resealable storm flap, finger loops. Elastic in hood, waist and around wrists and ankles.

SEAM TYPE

Bound seams

OVERVIEW STANDARDS

CE CATEGORY III (Type 5-B, Type 6-B, EN 1073-2, EN 14126, DIN 32781, EN 1149-5)

PRODUCT REFERENCE


COUNTRY OF ORIGIN

CAMBODIA

WEIGHT

63 gr/m2

MAIN SECTORS
  • Life Sciences
  • Car industry
  • Metal production
  • Food processing
  • defence
  • Agriculture
  • After-sales service in the automotive sector
  • Chemical sector
  • Emergency medical services
  • Machinery & Equipment
  • Oil and gas
  • Utilities

PRODUCT CATEGORY

Coveralls Coveralls
Particles or low risk
Viral Protection
DESCRIPTION

DESIGN


BONDED SEAMS

Superior strength, liquid and particle barrier

SUIT FEATURES

• hood
• Elasticated hood, waist, wrists and ankles
• front zip 
•


COLORS

White

SIZES

S-5XL

DESIGN FEATURES

PRODUCT MATERIAL

Bonded polyethylene laminate with micropores

DESIGN FEATURES

Coverall, three-piece hood, 2-way front zip with resealable storm flap, finger loops. Elastic in hood, waist and around wrists and ankles.

SEAM TYPE

Bound seams

OVERVIEW STANDARDS

CE CATEGORY III (Type 5-B, Type 6-B, EN 1073-2, EN 14126, DIN 32781, EN 1149-5)

PRODUCT REFERENCE


COUNTRY OF ORIGIN

Cambodia

WEIGHT

63 gr/m2

MAIN SECTORS
  • Life Sciences
  • Car industry
  • Metal production
  • Food processing
  • defence
  • Agriculture
  • After-sales service in the automotive sector
  • Chemical sector
  • Emergency medical services
  • Machinery & Equipment
  • Oil and gas
  • Utilities
  • Life Sciences
  • Car industry
  • Metal production
  • Food processing
  • defence
  • Agriculture
  • After-sales service in the automotive sector
  • Chemical sector
  • Emergency medical services
PACKAGING
Individually wrapped