Fast Shipping from USA！
♦Kindly Notice♦
❗ Please Confirm if the Part Number, Fitment Details and Listed Pictures above same as your need before purchasing.
❗ A minor difference in part design may result in a different model. Please COMPARE our listed pictures with your old parts CAREFULLY.
❗ Contact us first, if you have any question or problem. We will back to you soon.
Please use the Ctrl+F to search the Part Number / Models that you need.
Description:
🆗 Brand New & High Quality
🆗 Tested and Works before shipping.
△ This is Parts, please check the pictures or size for compatibility before ordering it.
△ Not including Installation instruction. Professional Installation is Highly Recommended.
Replace Part Number:
16400-RAA-A21, 16400RAAA21, 16400RZAA01, TB1245, 672004
Fitment:
Acura CSX 2.0L 2006-2011
Honda Accord 2.4L 2006-2007* EX, EX-L,LX, LX SE ,LX Special Edition ,Special Edition ,Value Package
Honda Civic 2.0L 2006-2011
Honda CR-V 2.4L 2007-2009
Honda Element 2.4L 2007-2011
For vehicle built in USA; Mexico Built
How is Throttle Body Replacement Done?
You will need: screwdrivers, socket set, spanners, needle pointed pliers.
Throttle Body Replacement
1. Refer to the service manual for identification and location of the throttle body.
2. Remove the air intake duct from the throttle body once it is located.
3. Check the throttle body as well as the assembly and ports. If there is wearing in the assembly it may also require replacement.
4. Pull out the cables from the throttle body.
5. Remove the hoses such as air or vacuum hoses from the throttle body.
6. Disconnect the throttle position sensor.
7. Remove the screws that are holding the throttle body in the assembly.
8. Remove the throttle body carefully after disconnecting everything.
9. Properly clean the assembly and port to remove any carbon build up.
10. Compare the old throttle body with the new one.
11. Install the throttle body in the port.
12. Fasten the bolts and screws to hold it in place.
13. Connect all the things that you previously removed.
14. After connecting everything start your engine and test for the new throttle body.
15. Perform the following check as a final test. Start the engine and take the car for a test drive. On your return, let the engine idle for about two minutes and listen for problems in the idle, ensuring that it is smooth. If it is not, then there may be additional problems throughout your engine.
Package includes (as pictured):
1x Throttle Body
Instruction is not included.
