New Cherry 15 Amp, 125 Volt / 250 Volt, Normally Open AND Normally Closed, Lever Actuated Snap Action SPDT MicroSwitches, Part Number E13-80HE, or E1380HE, or 0E1380HE.  Each bid quantity is for a Lot of Two (2) Switches.  You may bid / buy any number of lots, up to the total quantity available above.

These switches were purchased from an industrial liquidator last year, and they were brand new in the original factory boxes.  We repackaged them into 4-mil Ziplok bags for resale.  These are nice sturdy switches for a multitude of applications.  These have heavier contacts and are rated for the more demanding use with DC current (2A up to 48VDC). The contacts are Normally Open or Normally Closed, so they can be wired two different ways; depending on which terminal is used:

Using the angled "NO" terminal, no current flows through the switch until the button is pressed.  Press the button and the light comes on, electric motor starts running, etc.

Using the straight "NC" terminal, current flows through the switch continuously until the button is pressed.  Press the button and the light goes off, electric motor stops, etc.

Written on the switch:

E13 P CHINA
(Underwriters Recognized certification mark)
15A 125 or 250 VAC
(CSA certification mark)
L
3/4 HP 125VAC   1-1/2 HP 250 VAC
2A, 48 VDC   08-10

According to the calipers:

Overall length: 3.404" / 86.46 MM

Length (excluding terminals & lever): 1.829" / 46.46 MM

Width: .647" / 15.94 MM

Overall height: 1.004" / 25.50 MM

Height (excluding lever): .795" / 20.20 MM

Lever width (toward pivot): .337" / 8.55 MM

Lever width (at end): .195" / 4.94 MM

Lever thickness: .035" / 0.89 MM

Mounting holes: #6 machine screws, spaced 1.000" OC (on centers)

According to the manufacturer:

E13 SERIES

Specifications

Temperature Rating: 105°C
Flammability Rating: UL94HB

Materials:

-- Case: General Purpose Phenolic
-- Actuating Button: Plastic
-- Common Terminal: Brass
-- Moving Blade: Brass
-- Spring: Stainless Steel
-- Contacts: Silver Alloy
-- Lever: Steel (chrome plated)

UL1054 Rating: 15A, 125/250VAC; 3/4HP, 125VAC 1-1/2HP, 250VAC; 2A 48VDC
Terminals: Standard .250" (1/4") x 0.032" (6.35 x 0.81mm)

Mounting

-- Recommended mounting screw: #6-32 round head
-- Recommended torque on screw: 6 inch-lbs. max

Operating Force: 0.17 LB / 77 g
Pre-Travel: .144" / 3.65 MM
Over-Travel: .350 / 8.90 MM