Oscilloscope AC Current Probe 80Hz-60MHz Max Continuous Current 15App5.3Arms BNC
CP1015
CP1015 current probe is used for AC current testing. The current under test can reach peak value of 15A, low frequency bandwidth 80Hz, high frequency bandwidth 60MHz.
Its standard BNC output port can be connected to the oscilloscope of any brand. The clamp design can proceed testing easily without disconnect the circuit under test.
CP1015 has been largely used in testing like motor drive, inverter, power switch and avionics.
Product Specification
| Bandwidth（-3dB） | 80Hz~60MHz |
| Max continuous current |
15App(5.3Arms) Max current VS Frequency(Fig. 1) |
| Max Pulse Current | 250Apk (Fig 2) Can’t surpass 500A*us or 5.3 Arms, or the magnetic core could saturate and unable to zero. |
| Max DC saturation current | 0.5A |
| Intermediate Frequency Accuracy | ≤3% |
| Current Transfer Ratio | 100mV/A |
| Delay time | 16ns |
| Rising time | ≤5.83ns |
| Terminal Load | 1MΩ |
| Input Impedance (Typical) | 0.04Ω(100kHz),0.14Ω(1MHz) |
| Clamp Diameter | Approx. 5mm |
| Output Port | BNC |
| Output cable length | 1.5m |
|
Safety level Safety Level |
300V CATI |
| Operating Temperature and Humidity | 0℃~50℃,80% or less |
| Storing Temperature and Humidity | -40℃~70℃,80% or less |
| Operating Altitude | 2000m |
| Size ( Length* Width * Height) | 216*115*45mm |
| Weight | Approx. 150g |
|
