YEENON ARRI-E Macro Adapter - Arri Arriflex Standard Lens to Sony E Mount Camera.



Front mount: Arri-S mount (Arriflex Cine Lens)
Back port: Sony E-mount mirrorless camera/camcorder
Weight: 141g
Normal closed length: 24mm
Fully extended length: 32mm
Macro extension travel: 8mm


When installing or uninstalling the lens, please keep the lens facing upwards (adapter downwards) to prevent the lens from accidentally falling off.


The installation steps are as follows:


1. Press the red release lever and simultaneously push the adapter switch towards the OPEN direction to place the adapter in the OPEN position.


2. With the adapter in the OPEN position, the lens can be installed by aligning the groove at the rear of the lens (A) with the guide pin inside the adapter (B) and insert the lens into the adapter properly.


3. Then press the red release lever and simultaneously push the adapter switch towards the LOCK direction to place the adapter in the LOCK position, completing the installation.


4. To remove the lens, follow STEP 1 to release the lens.