Description 
The Denture Injection Unit is composed of a hot press (frame, cylinder, heater, bracket and flask etc), and an automatic temperature control system(temperature control, timer and electric system).It has automatic temperature control, automatic heat preservation and reminder function. It  improve the temperature control system based on the original organic type, and the operation is simpler. It is a necessary equipment for the manufacture dentures.

Specification 
Voltage:AC110v/60HZ/220V 50HZ ±10%
Power : 350w
Heating temperature : 282°C-288°C
Pressure time: 7m30s-11m
Weight: 30kg

Package Listing:
Split Invisible Shelf*1; 
Split Thermostat*1; 
Hexagon socket (tool to open the box)*1, 
High Temperature Oil*1; 
Large Topping Block*1; 
Small Topping Block*1; 
Large Invisible Adhesive*1; 
Small Invisible Adhesive*1; 
Heating Bucket*1; 
Seasoning Stick*1; 
Weighted Lever*3; 
Box*1; 
Power Cord*1; 
Instruction Manual*1

Installations
1.The three force rods are screwed correspondingly, and the flask is placed on the bottom plate of the hot press;
2.Put the heating bucket into the heating furnace above the temperature control box, and put the invisible rubber into the heating barrel 
3.For example, it is good to apply high temperature oil on the invisible glue to facilitate the return of the skin.

Safety protection device and cautions
1.This machine has a grounding protection. Make sure it is grounded while using.
2.After the injection, there might be some material left in the cartridge holder, which can be pushed out by the hot press. If not, users can start the heater for easier removal.
Note: Due to the different altitudes and seasons, it is necessary to set the heating temperature and holding time according to the actual situation. If the finished product is too dark, the setting temperature and holding time can be appropriately increased. If the color is too light, the set temperature and holding time can be lowered!

Maintenance and post-sale service
1.The power should be turned off if the machine will not be used for a long period. Clean up the remains and dust to avoid malfunction.
2.The main frame is given 1-year warranty; the heating loop, temperature controller and time controller for three months.

a)   Credit Card & Paypal accepted.

b)   Please accomplish payment within 7 days after purchase. If you do have any reason cannot make payment timely, kindly please email me. Otherwise, all unpaid items will be filed an unpaid item dispute through eBay.

c)   Import duties, taxes and charges are not included in the item price or shipping costs. These charges are the buyer's responsibility. Please check with your country's customs office prior to bidding/buying to determine what these additional costs will be.