JCS Hi-Grip Stainless Steel Worm Drive Hose Clamps Clips W4
Item description
Hi-Grip stainless steel worm drive hose clips have become the industry standard for
demanding applications throughout the world due to their exceptional quality and
performance.
Made entirely from 18/8 marine quality stainless steel and with Lloyds Register
Approval, they are ideal for salt water and other highly corrosive environments.
Key Points
- Material:
- Housing & Band: HI-Grip Stainless 304
- Screw: HI-Grip Stainless 304
- Sizes:9.5mm - 140mm
- HI-Grip Stainless 304 all parts BS304 - EN 1.4301/14576
- Heavy duty
- No loose parts
- Marine and Industrial Grade
- Rounded Edges
- High Corrosive resistance
Extra Tools
- Flexi Driver:
The Flexi Driver is an indispensable tool for installing clamps, thanks to its long reach and flexible neck. Please refer to the link below for more information on. - Flexi Driver Link
HI-Grip Data Sheet
Selecting the correct size clamp:
- Accurately measure the OUTSIDE diameter of your hose / application.
- Select the Hose Clip which size range matches the OD of your hose.
- The outer diameter of the hose tends to increase when you push the hose onto a spout or connection.
- Size Example: If the hose is 57mm outside diameter, use a 50-70mm clamp.
Applying the clamp:
- Make sure you have a Slotted Screwdriver or flexi driver and loosen the bolt enough to get over the pipe or hose.
- Slide clamp over hose.
- Connect hose to connector, make sure the connector is far enough in, tighten the bolt up firmly, do not exceeding the recommend torque.
- Test it's tight enough you're done
