Pro 105
INSTALLATION:
•
Insert light head into the curing light handpiece with a twisting motion，Ensure
that both the direct light source head and the light curing host are fully
connected to their corresponding positions
•
Connect the adapter connector to the USB Type-C charging line, and then connect
the power supply. The magnet tail cap at the bottom of the host can be stably
adsorbed on other metal surfaces.
•
After switching on the power adapter, insert the charging port or pull out the
charging port, the machine will wake up automatically, and the host screen will
light up
•
The main panel indicator light "orange" indicates that the battery is
in charge, and the light "green" indicates that the battery is full,
and the machine will automatically stop charging.
•
When the host is charged for one minute in an unused state, the screen will
shut down automatically, and the battery will still be charged until the
battery is full。
•
The battery is not fully charged prior to shipment. Please charge the battery
for a minimum of 4 hours prior to first use。
•
To check the battery, press and hold the time switch for 4 seconds, display
screen will show:
a.) 4.2 – 3.7- Battery is normal
b.) Lo- Battery is low
•
When battery is low, curing light circuit will automatically compensate for
power output or turn the light off. Always recharge the curing light when the
battery is low Lo
•
Direct charging option from transformer for easy transportation and mobility
OPERATION:
•
Turn on the curing light with on/off switch
•
his machine has 3S high power. full RAMP PULSE 3'+3'Five working modes. The
default mode is (full power) and the
default time is 10 seconds.
•
Press and hold the time button for 0.1 seconds to select the time.Only three
time modes of FULL RAMP PULSE can be selected, which are 05 10 15 20 25,
respectively.
•
Long press mode button 0.5 seconds to unlock, mode selection can be made, when
no operation 30S automatically unlock, and long press mode button 0.5 seconds
to unlock.
•
Every change of time or mode, there will be a ‘beep’ sound. The curing light
will keep the last program selected in memory
•
Put on the disposable curing light sleeve to cover the whole curing light for
cross-infection control. Then put on the light protective shield and light head
protective ring, the curing light is ready for use
•
Remove and dispose of the curing light sleeves after every patient
•
Curing light will automatically turn off if not in use for 1 minute
SPECIFICATION:
Power
supply:Input: AC 100-240V, 50/60Hz
Output
:DC 5V/1A
Intensity
High:1800mw/cm2
Battery:
3.6V, 2600 mAh (9.36Wh)
Handpiece
dimension: Φ3.0 cm x 24 cm .
Packing List:
Main
unit of the LED x1
Protective
light shield x1
Transformer
(100 -240V) x1
USB
Type-C Chrging line x1
Instruction
manual x1
&
Plus 105
The LED Plus model is a 90-degree,
105-degree Angle with 8 watts. Use 3 blue light plus 1 purple light high-power
chip. The effect of light can be seen that the light transmittance of the light
cross lens reaches 97%. It is more convenient to light solidify the molars
inside the mouth.
！！！Because the light emitted by one of the purple LEDs is invisible to the human eye, the LED lights appear to have only three lights on during use.
INSTALLATION:
• Insert light
head into the curing light handpiece with a twisting motion，Ensure that both the direct
light source head and the light curing host are fully connected to their corresponding
positions
• Connect the
adapter connector to the USB Type-C charging line, and then connect the power
supply. The magnet tail cap at the bottom of the host can be stably adsorbed on
other metal surfaces.
• After switching
on the power adapter, insert the charging port or pull out the charging port,
the machine will wake up automatically, and the host screen will light up
• The main panel
indicator light "orange" indicates that the battery is in charge, and
the light "green" indicates that the battery is full, and the machine
will automatically stop charging.
• When the host is
charged for one minute in an unused state, the screen will shut down
automatically, and the battery will still be charged until the battery is full。
• The battery is
not fully charged prior to shipment. Please charge the battery for a minimum of
4 hours prior to first use。
• To check the
battery, press and hold the time switch for 4 seconds, display screen will
show:
a.) 4.2 – 3.7- Battery is normal
b.) Lo- Battery is low
• When battery is
low, curing light circuit will automatically compensate for power output or
turn the light off. Always recharge the curing light when the battery is low Lo
• Direct charging
option from transformer for easy transportation and mobility
OPERATION:
• Turn on the
curing light with on/off switch
• his machine has
1S high power. 3S high power. full RAMP PULSE 3'+3'+6'+6'seven working modes.
The default mode is (full power) and the
default time is 10 seconds.
• Press and hold the time button for 0.1 seconds to select the
time.Only three time modes of FULL RAMP PULSE can be selected, which are 05 10
15 20 25, respectively.
• Long press mode
button 0.5 seconds to unlock, mode selection can be made, when no operation 30S
automatically unlock, and long press mode button 0.5 seconds to unlock.
• Every change of
time or mode, there will be a ‘beep’ sound. The curing light will keep the last
program selected in memory
• Put on the
disposable curing light sleeve to cover the whole curing light for
cross-infection control. Then put on the light protective shield and light head
protective ring, the curing light is ready for use
• Remove and
dispose of the curing light sleeves after every patient
• Curing light
will automatically turn off if not in use for 1 minute
SPECIFICATION:
Power
supply:Input: AC 100-240V, 50/60Hz
Output :DC 5V/1A
Intensity High:
2500 mw/cm²
Battery: 3.6V,
2600 mAh (9.36Wh)
Handpiece
dimension: Φ3.0 cm x 24 cm .
Packing List:
Main unit of the
LED x1
Protective light
shield x1
Transformer (100
-240V) x1
USB Type-C Chrging
line x1
Instruction manual
x1
